PolyOne among notable '12 deal makers

By Frank Esposito
Senior Staff Reporter

Published: January 29, 2013 3:44 pm ET
Updated: January 29, 2013 3:51 pm ET

Related to this story

Topics Mergers & Acquisitions
Companies & Associations Companies & Associations, PolyOne Corp.

Deal volume in plastics materials mergers and acquisitions showed modest growth in 2012, while valuations for those deals remained high when compared to other areas of the plastics market.

The resin, color and compounding sector recorded five more global deals in 2012 than in 2011, according to P&M Corporate Finance LLC in Southfield, Mich. That's a hike of 9 percent. When divided by product segments, resin showed six more deals for a 12 percent increase.

Average valuations for materials deals ranged from six to 11.5 times earnings in 2012, according to Polymer Transaction Advisors Inc. of Newbury, Ohio. That was the highest range among seven plastics categories tracked by PTA.

One 2012 deal remarked on by several M&A executives contacted by Plastics News was PolyOne Corp's purchase of plastic sheet maker and compounder Spartech Corp. for almost $400 million. That deal stood out because it will move Avon Lake, Ohio-based PolyOne, North America's largest compounder and con­centrate maker, more into plastic products, as compared to raw materials.

Elliott Farkas, commercial/industrial group vice president with William Blair & Co. in Chicago, said he would not be surprised if PolyOne divested some of the assets it has acquired from Spar­tech. Market pros Bill Ridenour and Thomas Blaige each said the deal might cause PolyOne to compete with some of its own customers. Ridenour is owner of PTA. Blaige is president of Thomas Blaige & Co. LLC in Chicago.

Andrew Petryk — managing director and principal at Brown Gibbons Lang & Co. in Cleveland — said the PolyOne-Spartech deal "is different, but I'm not sure if that makes it more risky." At Chicago-based Stout Risius Ross Inc., director David Evatz said that "the verdict is still out" on the deal, which likely won't be judged accurately until three years from now.

Ridenour also singled out resin distributor M. Holland Co.'s acquisition of fellow distributor Christler Chemical & Plastics Inc. — a deal in which Ridenour represented Holland.

Holland, based in Northbrook, Ill., "had strong geographic reasons" to do the deal with Wilsonville, Ore.-based Christler, which generates most of its sales from the Pacific Northwest, Ridenour said. Holland also wanted to increase its sales volume in engineering resins, he added.

Other notable plastic materials deals in the second half of 2012 included:

• Georgia Gulf Corp.'s merger with the commodity chemicals business of PPG Corp. Atlanta-based Georgia Gulf is a major supplier of PVC resins and compounds. The deal calls for PPG shareholders to own 50.5 percent of the new company, which will operate as Axiall Corp. The transaction also includes a $900 million cash payment from Georgia Gulf to Pittsburgh-based PPG, as well as Axiall taking on $200 million of debt.

• Resin distributor Ravago Holdings Americas was involved in three deals during the year, buying PET distributors Burcham International of Columbia, S.C., and Meckler & Associates of Menands, N.Y., as well as elastomer processor Goldsmith & Eggleton Inc. of Wadsworth, Ohio. Ravago is based in Orlando, Fla.

• Compounding firm A. Schulman Inc. bought compounder ECM Plastics Inc. of Worcester, Mass., for $36.5 million. The ECM deal was the sixth acquisition in less than three years for Fairlawn, Ohio-based Schulman.

• Chemtura Corp. sold two plastic additive product lines — antioxidants and ultraviolet stabilizers — to private equity firm SK Capital for almost $200 million. The deal included six global plants. Officials with New York-based SK estimated that the two businesses could generate annual sales of around $500 million.


Comments

PolyOne among notable '12 deal makers

By Frank Esposito
Senior Staff Reporter

Published: January 29, 2013 3:44 pm ET
Updated: January 29, 2013 3:51 pm ET

Post Your Comments


Back to story


More stories

Image

Ukraine's Group DF may be forced to sell Crimea-based additives plant

July 28, 2014 10:12 am ET

Group DF, the industrial business of Ukrainian tycoon Dmitry Firtash, may be forced to sell off Eastern Europe's biggest producer of titanium oxide,...    More

Image

ADS launches public trading on NYSE

July 25, 2014 10:41 am ET

Advanced Drainage Systems, the world's largest producer of thermoplastic corrugated pipe, made its debut on the New York Stock Exchange today with 14....    More

Image

Gear pump maker Witte expands in Germany and USA

July 25, 2014 2:15 pm ET

Witte Pumps & Technology GmbH, the German maker of gear pumps for extrusion, has moved into a new headquarters factory in the Hamburg area, and the...    More

Image

Sealed Air's move to Charlotte will put it all under 'One Roof'

July 25, 2014 2:03 pm ET

Sealed Air Corp. shook the ground last week by announcing plans to relocate its headquarters from Elmwood Park, N.J., to Charlotte, N.C., in a move...    More

Image

Austrian mold maker seeking North American manufacturing partner

July 25, 2014 1:49 pm ET

An Austrian mold maker is looking for a manufacturing location in North America.    More

Market Reports

Plastics Recyclers Data Report & Directory

This exclusive MS Excel database contains all the companies from Plastics News' ranking of top North American Recyclers and Brokers by reprocessed volume and also includes a directory with materials processes, services offered and company contact information. Data is based on primary research by PN editorial staff.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events