Study predicts steady demand growth for TPEs

RUBBER & PLASTICS NEWS

Published: January 30, 2013 12:58 pm ET
Updated: January 30, 2013 1:00 pm ET

Related to this story

Topics Materials, Materials Suppliers

ALBANY, N.Y. -- Global demand for thermoplastic elastomers should rise at a compound annual growth rate of 5 percent in volume and 6.4 percent in value in the 2012-2018 year period, according to a new market report.

TPE consumption hit 3.48 million metric tons in 2011, and will increase to about 4.88 million tons by 2018, the study by Transparency Market Research said. The value of the market will rise from $9.9 billion in 2011 to $15.3 billion by 2018.

The study said styrenic block copolymers are the largest segment of TPEs, about 48 percent of the total in 2011. Used primarily for paving, roofing and in footwear, demand is expected to remain stagnant during the next five years as the market nears maturity.

Thermoplastic vulcanizates are forecast to be the fast-growing TPE product, with demand for the material rising at an annualized rate of 6.6 percent to 2018.

TPEs growth is fueled by increasing demand for lightweight and high-performance materials in the automobile industry. The shift toward replacing PVC with TPEs by major end use industries also is expected to drive TPE demand over the next five years, Transparency Market Research said.

The company warns the volatile nature of raw material prices and the regulatory issues caused by growing environmental concerns are expected to hinder TPE market growth.


Comments

Study predicts steady demand growth for TPEs

RUBBER & PLASTICS NEWS

Published: January 30, 2013 12:58 pm ET
Updated: January 30, 2013 1:00 pm ET

Post Your Comments


Back to story


More stories

Image

Chinese compounders seek market shares, often at the expense of margins

August 29, 2014 10:02 am ET

China's largest compounder, Kingfa Sci. & Tech. Co. Ltd., as well as its more automotive-focused counterparts Shanghai Pret Composites Co. Ltd. and...    More

Image

PP prices rise 5 cents

August 28, 2014 3:59 pm ET

After a one-month break, volatility has returned to the North American polypropylene resin market, with prices increasing by an average of 5 cents...    More

Image

DuPont fined for 2010 chemicals release

August 28, 2014 1:37 pm ET

DuPont Co. has been fined almost $1.3 million for the release of several chemicals — including plastics feedstock phosgene — at its plant ...    More

Image

LyondellBasell to build feedstock plant on Gulf Coast

August 28, 2014 11:05 am ET

LyondellBasell Industries will build a world scale propylene oxide plant on the U.S. Gulf Coast with a capacity of 900,000 metric tons per year.    More

Image

Bayer seeing success in project to replace petroleum with C02

August 28, 2014 10:18 am ET

Bayer MaterialScience says its research into the potential of using carbon dioxide as a raw material already is paying off in studies showing that C02...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events