PC prices rebound as nylon drops

By Frank Esposito
Senior Staff Reporter

Published: January 31, 2013 5:09 pm ET
Updated: January 31, 2013 5:15 pm ET

Related to this story

Topics Materials, Suppliers, Nylon 6/6, Materials Suppliers

AKRON, OHIO -- North American prices for polycarbonate and nylon resins traveled different roads in the fourth quarter of 2012, with PC prices climbing 3 percent and nylon prices declining by a similar amount.

The PC move equals a gain of 5 cents per pound on general-purpose grades used in injection molding. PC prices had dipped 4 percent in mid-2012, but rebounded as supply tightened and prices for benzene feedstock increased, market sources said.

Fourth-quarter PC supplies tightened as Sabic Innovative Plastics had a maintenance shutdown at its plant in Mount Vernon, Ind., and Bayer MaterialScience LLC did the same at its plant in Baytown, Texas. Those two plants account for almost 60 percent of North American PC capacity, according to IHS Chemical, a consulting firm in Houston.

In the benzene market, prices topped $5 per gallon for the first time in January, with contract prices settling at $5.16. Benzene prices now are up almost 23 percent since September. Spot benzene prices were falling in mid-January, possibly lessening the impact of that material on future PC pricing.

U.S. PC makers also benefited from increased export sales in the first seven months of 2012. Exports of PC from the U.S. grew 12 percent in that period, including an increase of almost 30 percent in PC exports to China.

Looking ahead, industry contacts said that PC demand could benefit from ongoing strength in the North American auto sector, and from a rebound in sales of appliances and electronic devices.

For nylon, the fourth-quarter decrease amounts to a drop of 6 cents for both nylon 6 and 6/6 resins. Although North American demand has improved as the number of auto builds has steadily increased to approach pre-recession levels, sources said that oversupply — particularly in nylon 6/6 — has served to keep prices down. Automotive uses account for 50 percent of North American nylon 6/6 demand and 35 percent of the region's nylon 6 demand, according to IHS.

Imports of nylon resin into the U.S. also increased 22 percent in the first seven months of 2012. Imports of nylon from Germany and Japan each grew more than 50 percent during that period. At the same time, exports of nylon from the U.S. to other countries fell by 3 percent in those seven months, causing more material to be available in the domestic market.

From 2012-17, global nylon operating rates should be relatively low at 60-70 percent, according to IHS, because of an abundance of capacity being added in China. North America leads the world in production of nylon 6/6, with a 41 percent market share. Northeast Asia is the largest nylon 6 producer, with 58 percent of global production.


Comments

PC prices rebound as nylon drops

By Frank Esposito
Senior Staff Reporter

Published: January 31, 2013 5:09 pm ET
Updated: January 31, 2013 5:15 pm ET

Post Your Comments


Back to story


More stories

Axiall resumes operations at damaged Lake Charles PVC feedstock plant

April 15, 2014 4:41 pm ET

Axiall Corp. has resumed operations at its PVC feedstock plant that was damaged by a fire in December.
More

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Image

Power failure shuts down two PE resin units in Texas

April 15, 2014 3:35 pm ET

Two polyethylene resin units operated by Chevron Phillips Chemical Co. LP in Baytown, Texas, were closed from April 8-11 because of a power failure.    More

Shell Chemical to host public meetings to discuss plans in Pennsylvania

April 15, 2014 3:27 pm ET

Shell Chemical LP will host two public meetings on April 16 to discuss the possibility of building a major petrochemicals plant in the Pittsburgh...    More

Image

Despite struggles, Europe still key market in global resin picture

April 15, 2014 2:06 pm ET

Challenges and opportunities facing international plastics and chemicals markets were tackled by a trio of top executives at the IHS World Petrochemic...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events