Flow Polymers to add capacity for plastic additives

By Frank Esposito
Senior Staff Reporter

Published: February 6, 2013 3:18 pm ET
Updated: February 6, 2013 3:28 pm ET

Related to this story

Topics Materials, Materials Suppliers

CLEVELAND -- Strong sales growth in plastic additives will lead Flow Polymers LLC to install a new production line by the end of the year.

Sales of SureFlo-brand additives made by Cleveland-based Flow grew 40 percent during 2012, President and CEO Mike Ivany said in a Feb. 5 phone interview. The firm had planned to add the new line during 2012, but Ivany said Flow personnel were able to get more production out of the existing line, which started up in 2009.

SureFlo growth has come from several areas, but Ivany said that recently the material has provided "the biggest benefit" in blow molded parts used in landscaping and trash removal. SureFlo is a proprietary mix of hydrocarbon resins that can increase flow and line speed, and allow different resins to be reprocessed together.

During 2012, Flow also moved part of its rubber-based business to an 83,000-square-foot plant about four miles away from its existing plant in an industrial area of Cleveland's east side. The additional space was needed after Flow closed a smaller plant in Connecticut in late 2011 because of environmental issues from a previous business at that site.

Adding the second site and overall sales growth allowed Flow to add 25 jobs during 2012, Ivany said. More jobs might need to be added in 2014 after the second SureFlo production line comes on later this year.

Flow's main business has been rubber additives and dispersions since it was founded in 1984 by Cleveland entrepreneur Dan Moore. In late 2010, Moore's Dan T. Moore Co. sold a stake of about 75 percent in Flow to Chicago private equity firm Geneva Glen Capital LLC.

The existing SureFlo production line is in a 100,000 square-foot building that was used to manufacture torpedoes during World War II.


Comments

Flow Polymers to add capacity for plastic additives

By Frank Esposito
Senior Staff Reporter

Published: February 6, 2013 3:18 pm ET
Updated: February 6, 2013 3:28 pm ET

Post Your Comments


Back to story


More stories

Image

Oxford Polymers adds compounding capacity

January 30, 2015 1:16 pm ET

Materials maker Oxford Polymers has increased its compounding capacity by installing a new single-screw extrusion line.    More

Image

Marval's next generation expands capacity

January 30, 2015 1:27 pm ET

MAMARONECK, N.Y. — There’s a lot of history at Marval Industries Inc., but the 59-year-old compounding firm also is looking toward the...    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

UPDATED — Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Resin prices continuing to tumble

January 29, 2015 2:24 pm ET

The ongoing slide in crude oil prices is taking commodity resin prices down as well.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events