Injection molder Core Systems strikes back at Whirlpool

By Michael Lauzon
Correspondent

Published: February 8, 2013 1:15 pm ET
Updated: February 8, 2013 1:36 pm ET

Related to this story

Topics Appliances, Injection Molding, Molds/Tooling, Legal, Injection molds

PAINESVILLE, OHIO -- Custom injection molder Core Systems LLC has countersued Whirlpool Corp., whose Jan. 24 lawsuit claims Core breached contract.

Core injection molded about 250 parts for Whirlpool plants in Findlay, Clyde, Marion and Greenville, Ohio, before Whirl­pool terminated its services Jan. 24. The loss of that business forced Core to close its Mount Gilead, Ohio, plant.

The fates of Mount Gilead and of Core's headquarters plant in Paines­ville, Ohio, are still being discussed, according to Core counsel Philip Oliss of Cleveland.

Core has returned all of the relevant Whirlpool tooling, Oliss said in a telephone interview.

In the past five years, Whirl­pool business has accounted for about $150 million in sales for Core, which had total sales of $47 million for its fiscal year ended Sept. 30.

In a Feb. 3 response to Whirl­pool's complaint filing to the court, Core denies most of Whirlpool's allegations and says that, in some cases, it could not meet obligations because Whirl­pool interfered with Core and misinterpreted the two parties' agreements.

A key issue in Core's countersuit is a performance improvement plan, agreed to Jan. 11, in which Whirlpool gave Core until March 28 to achieve certain milestones, according to Core. Core said it was coerced into signing the one-side agreement.

In any event, without notice, Whirlpool informed Core it would re-source components and demanded same-day access to Core facilities to reclaim tooling. Core alleges that, at about the same time, Whirlpool cut off a payment system in which Core could quickly sell accounts receivable within 15 days to receive immediate cash. Without that system, Core and its secured lenders were dealing with "tainted" collateral, and Core's relationship with those lenders was jeopardized, according to the molder.

A Jan. 28 interim court order requested Whirlpool pay for manufactured parts and negotiate on economic issues. Core said Whirlpool reneged on that order and offered to buy the parts at 40 percent of the contract price.

On Feb. 3 Whirlpool stopped buying finished parts and refused to compensate Core for raw materials bought for Whirlpool programs.

Core alleges Whirlpool owes it more $4.5 million for finished parts and dedicated raw materials, and it is seeking unspecified damages through the courts. Of that amount, $1.3 million was owed to raw materials suppliers Jan. 21; at that time Core had only $11,000 in cash.

When Core asked Whirlpool to provide it with $250,000 and $900,000 in revolving financing, Whirlpool declined.

Whirlpool, which had complained of delivery and quality problems and competitiveness, had hoped the performance plan would solve those problems.

Core's Feb. 3 filing brings several counts against Whirlpool, including breach of contract for purchasing orders and the performance improvement plan, negotiating in bad faith, interference with Core's accounts receivable system, unjust enrichment and broken promises.

Core is asking for an award of damages and fees to be decided at trial. The case is scheduled for trial by jury May 22, presided over by U.S. District Judge Donald C. Nugent.

Both parties have declined interviews to discuss the status of the tooling and of Core's plants.


Comments

Injection molder Core Systems strikes back at Whirlpool

By Michael Lauzon
Correspondent

Published: February 8, 2013 1:15 pm ET
Updated: February 8, 2013 1:36 pm ET

Post Your Comments


Back to story


More stories

Molder goes to auction block

October 17, 2014 12:17 pm ET

An Illinois custom injection molding operation will be auctioned off after its owner decided to close the business.    More

Image

Hasco gets into augmented reality

October 17, 2014 6:00 am ET

Mold makers may be used to seeing cores and pins on the exhibition stand of a supplier — but not augmented reality that looks like it comes...    More

Image

Plastikon expanding in Kentucky

October 17, 2014 11:24 am ET

Automotive supplier Plastikon Industries Inc. plans to more than double the size of its production facility in Leitchfield, Ky.    More

Image

Taiwan's machinery makers look to speed development of all-electrics

October 15, 2014 11:25 am ET

Taiwan's large plastics machinery industry faces a challenge — less than 10 percent of its equipment uses the more eco-friendly all-electric...    More

Image

French molder betting on growth in the auto industry, Detroit

October 14, 2014 6:00 am ET

Precision French molder AdduXi Group is opening its first factory outside of its home country — in a Detroit suburb — and the top local ex...    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events