Jabil buying Nypro and its reputation

By Bill Bregar
Senior Staff Reporter

Published: February 8, 2013 2:35 pm ET
Updated: February 8, 2013 2:50 pm ET

cartoon

Image By: Rich Williams

Related to this story

Topics End Markets, Medical, Mergers & Acquisitions, Processes, Injection Molding, Electrical/electronics, Injection molds
Companies & Associations Companies & Associations, Nypro Inc.

The plastics world changed Monday Feb. 4, when the news came out that Jabil Circuit Inc. will buy Nypro Inc.

Everybody knows Nypro. That fact alone is noteworthy in an industry as fragmented as plastics. And it shows that what Jabil is buying from Nypro's Employee Ownership Stock Plan is more than a collection of skilled plastics people, injection molding machines and factories spread around the world — it's an admired and respected institution.

Nypro is a $1.2 billion custom molder and contract manufacturer. Former Nypro people are sought-after plastics manufacturing experts. Many have started their own companies.

Nypro Chairman Gordon Lankton is a living legend in the plastics industry. A mechanical engineer, he graduated from Cornell University in 1954. In a Plastics News profile when he entered the Plastics Hall of Fame in 2000, Lankton recalled a job interview when he first saw injection molding: "To have something very complex like that, and to see it falling out of a molding machine every 20 or 30 seconds. It was just an amazing new process."

Nylon Products Corp. was founded in 1955 by Nick Stadtherr and Fred Kirk. Lankton bought half of the company in 1962, then bought the rest in 1969. He soon started sharing ownership with key employees through a stock ownership plan and profit sharing.

Lankton combined a restless, adventurous spirit — he took a motorcycle trip from Germany to Japan in 1955 — with a knuckle-down approach to work, spending long hours in the factory and visiting customers around the globe.

Nypro grew by becoming international and teaming with key, large customers. Nypro was a pioneering U.S. custom molder to set up shop in Asia and Europe.

In blue-collar Clinton, Mass., Nypro took a hulking old carpet mill and turned it into a manufacturing showcase. It's one of the most impressive plastics factories in the United States.

In 1998, Lankton's egalitarian streak led him to turn over Nypro to its employees. Jabil will buy Nypro from 1,900 ESOP members and another 200 key international employees who have an ownership stake.

ESOPs have many advantages. Employee owners pull together to make a company successful and profitable. But ESOPs aren't perfect. In the case of a Nypro — needing money to make acquisitions and to invest in high-level equipment for the demanding molding and assembly of medical, packaging and consumer electronics — an ESOP can make it more difficult to obtain major forms of financing. Employees that retire, are laid off and quit get their ownership stake paid out.

"In my mind, ESOPs are great tools when you have a steady-growth company. But when you require money for rapid growth, or if you have to contract and get smaller, ESOPs are not the best structure to have," said Jeff Mengel, partner with Plante & Moran PLLC.

Mengel said the ESOP structure is a major factor driving the sale. The consolidation trend in medical is fairly new, but Mengel said other molders should not read too much into the Nypro-Jabil story.

"There's still an awful lot of niche players. So I don't think it has any impact on the small guys, but this may be a harbinger of consolidation for medium-sized companies."

Terry Minnick, president of Molding Business Systems, who advises smaller plastics companies, agreed. "There is a place in the market for huge molders, and there's a place in the market for medium-sized molders. But there's a lot of small guys out there that make nice living and do a good job for their customers," he said.

Bregar is an Akron, Ohio-based Plastics News senior reporter.


Comments

Jabil buying Nypro and its reputation

By Bill Bregar
Senior Staff Reporter

Published: February 8, 2013 2:35 pm ET
Updated: February 8, 2013 2:50 pm ET

Post Your Comments


Back to story


More stories

Some medical devices could get faster approval with new FDA rules

April 22, 2014 7:41 pm ET

The U.S. Food and Drug Administration is proposing an expedited approval for medical devices for devices aimed at the diagnosis or treatment of...    More

Image

Two Ohio groups team up to accelerate development of future medical devices

April 22, 2014 9:55 am ET

The Austen BioInnovation Institute in Akron and Cleveland-based design specialists Nottingham Spirk announced a strategic partnership that the two...    More

Image

Coffee roaster looks to improve footprint of single cup systems

April 22, 2014 1:30 pm ET

One of the largest coffee and tea manufacturers in North America has introduced a single-serve beverage capsule intended to curb the waste created by ...    More

Image

HRS adding more North American production for hot runners

April 22, 2014 12:57 pm ET

An Italian tooling component supplier is set to open a new production plant in Grand Rapids, Mich. The HRS Flow Division of San Polo di Piace-...    More

Image

Pregis Corp. to get new owner

April 22, 2014 11:44 am ET

The private equity owner of Pregis Corp. is selling off its North American operations for an undisclosed sum.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events