Jabil buying Nypro and its reputation

By Bill Bregar
Senior Staff Reporter

Published: February 8, 2013 2:35 pm ET
Updated: February 8, 2013 2:50 pm ET

cartoon

Image By: Rich Williams

Related to this story

Topics End Markets, Medical, Mergers & Acquisitions, Processes, Injection Molding, Electrical/electronics, Injection molds
Companies & Associations Companies & Associations, Nypro Inc.

The plastics world changed Monday Feb. 4, when the news came out that Jabil Circuit Inc. will buy Nypro Inc.

Everybody knows Nypro. That fact alone is noteworthy in an industry as fragmented as plastics. And it shows that what Jabil is buying from Nypro's Employee Ownership Stock Plan is more than a collection of skilled plastics people, injection molding machines and factories spread around the world — it's an admired and respected institution.

Nypro is a $1.2 billion custom molder and contract manufacturer. Former Nypro people are sought-after plastics manufacturing experts. Many have started their own companies.

Nypro Chairman Gordon Lankton is a living legend in the plastics industry. A mechanical engineer, he graduated from Cornell University in 1954. In a Plastics News profile when he entered the Plastics Hall of Fame in 2000, Lankton recalled a job interview when he first saw injection molding: "To have something very complex like that, and to see it falling out of a molding machine every 20 or 30 seconds. It was just an amazing new process."

Nylon Products Corp. was founded in 1955 by Nick Stadtherr and Fred Kirk. Lankton bought half of the company in 1962, then bought the rest in 1969. He soon started sharing ownership with key employees through a stock ownership plan and profit sharing.

Lankton combined a restless, adventurous spirit — he took a motorcycle trip from Germany to Japan in 1955 — with a knuckle-down approach to work, spending long hours in the factory and visiting customers around the globe.

Nypro grew by becoming international and teaming with key, large customers. Nypro was a pioneering U.S. custom molder to set up shop in Asia and Europe.

In blue-collar Clinton, Mass., Nypro took a hulking old carpet mill and turned it into a manufacturing showcase. It's one of the most impressive plastics factories in the United States.

In 1998, Lankton's egalitarian streak led him to turn over Nypro to its employees. Jabil will buy Nypro from 1,900 ESOP members and another 200 key international employees who have an ownership stake.

ESOPs have many advantages. Employee owners pull together to make a company successful and profitable. But ESOPs aren't perfect. In the case of a Nypro — needing money to make acquisitions and to invest in high-level equipment for the demanding molding and assembly of medical, packaging and consumer electronics — an ESOP can make it more difficult to obtain major forms of financing. Employees that retire, are laid off and quit get their ownership stake paid out.

"In my mind, ESOPs are great tools when you have a steady-growth company. But when you require money for rapid growth, or if you have to contract and get smaller, ESOPs are not the best structure to have," said Jeff Mengel, partner with Plante & Moran PLLC.

Mengel said the ESOP structure is a major factor driving the sale. The consolidation trend in medical is fairly new, but Mengel said other molders should not read too much into the Nypro-Jabil story.

"There's still an awful lot of niche players. So I don't think it has any impact on the small guys, but this may be a harbinger of consolidation for medium-sized companies."

Terry Minnick, president of Molding Business Systems, who advises smaller plastics companies, agreed. "There is a place in the market for huge molders, and there's a place in the market for medium-sized molders. But there's a lot of small guys out there that make nice living and do a good job for their customers," he said.

Bregar is an Akron, Ohio-based Plastics News senior reporter.


Comments

Jabil buying Nypro and its reputation

By Bill Bregar
Senior Staff Reporter

Published: February 8, 2013 2:35 pm ET
Updated: February 8, 2013 2:50 pm ET

Post Your Comments


Back to story


More stories

Image

Lawmakers target plastic bags, bottles

September 18, 2014 2:19 pm ET

California is poised to ban single-use plastic bags. At this point Gov. Jerry Brown could still veto the bill, but that seems extremely unlikely.    More

Image

P&G removing PE microbeads from its Crest brand toothpaste

September 18, 2014 1:57 pm ET

After months of prodding, Procter & Gamble Co., the makers of Crest brand toothpastes, say polyethlene microbeads will be completely removed from its ...    More

Image

Bayer spinning off plastics business

September 18, 2014 8:49 am ET

Bayer AG will spin off its MaterialScience plastics group into a separate, publicly-traded company within the next 12 to 18 months.    More

Image

Bill Kent named Thermoformer of the Year

September 18, 2014 12:11 pm ET

Bill Kent flew 6 million miles in a 50-year career at Brown Machine LLC — where he began assembling thermoforming machinery on the factory...    More

Image

Nolato Contour beefs up white room molding capabilities

September 18, 2014 11:56 am ET

Nolato Medical has extended its controlled environment options to include a white room at its Baldwin, Wis., Nolato Contour plant.    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events