Filling technical jobs could get tougher

Dan Regovich

Published: February 8, 2013 3:38 pm ET
Updated: February 8, 2013 4:26 pm ET

Related to this story

Topics Topics, Education & Training, Workforce

I regularly get calls from plastics companies all around the country that are having a tough time finding technical candidates with plastics experience. Many of these positions require someone with a degree. The conversation usually starts off like this: "Dan, we have been looking for several months for a (insert title) and haven't found anyone. I thought it would be a lot easier to find someone since the unemployment rate has been around 8 percent for quite some time."

There are a few reasons why this is happening.

The first is that for the year 2012, the Bureau of Labor Statistics shows that the average unemployment rate for those who held degrees and were 25 years and older was right around 4 percent. Many experts consider 4 percent unemployment to be full employment.

On top of that, these companies need someone who has experience within their specialty — injection molding, blown film, extrusion, etc.

If you find that perfect candidate, one problem that might keep him or her from joining your firm is the housing market — it's still bad for selling a house. Many candidates either don't want to relocate or can't relocate. I have seen many candidates who don't want to relocate because they are afraid that they won't be able to sell their house quickly and can't afford to take on two mortgages. I have also seen candidates who simply can't relocate because they are underwater on mortgages. This issue will likely extend into the foreseeable future and affects all types of positions, not just technical ones.

Another issue is there are very few companies that want to train new employees. Most firms want to hire someone with experience. While that is good for the recruiting profession, it is not good for the long-term health of a company. Unemployment will continue to go down and baby boomers who have been putting off retirement will soon retire, making many more positions difficult to fill.

Robert Grace in his Jan. 4 Perspective said, "Many technically qualified engineers were laid off or left the industry during the recent recession, and now, with business on the increase for many, the talent pipeline has dried to a trickle." He goes on to give many great suggestions about the topics of workforce development, education, training, recruitment and retention. I highly recommend that you read this article if you haven't done so already.

There are a couple of things that can be done to offset these issues:

• If your company is already having problems filling positions, now is a good time to start implementing a new process to train employees. Yes, it will be an investment of time and money, but it will pay off in the long run when your competitors are falling behind because of a lack of qualified candidates. Plastics News' Executive Forum 2013, which will address these issues, is a good place to start for ideas. All candidates, especially technical candidates, are only going to become more difficult to find.

• When relocating someone, offer a reasonable relocation package. It needs to be a package that doesn't let the candidate take all the risk in this housing market.

• If you are not able to offer a relocation package, perhaps it might be best to work with a local recruiter who doesn't necessarily have to know plastics, but knows the local market and specializes in technical positions. If you were to be flexible on some of your requirements, you might find some good people right in your backyard that could get up to speed quickly with a minimal learning curve.

Dan Regovich is the owner of AJ Augur Group LLC of Mentor, Ohio, an executive search firm specializing in the plastics industry.


Comments

Filling technical jobs could get tougher

Dan Regovich

Published: February 8, 2013 3:38 pm ET
Updated: February 8, 2013 4:26 pm ET

Post Your Comments


Back to story


More stories

Image

New medical firm buys Clairson Plastics

September 19, 2014 4:33 pm ET

Custom injection molder Clairson Plastics is being sold to a new start-up that plans to dive into the medical market with a new dialyzer, a key...    More

Image

Dunkin' Donuts looking at PP to replace foam cups

September 19, 2014 3:22 pm ET

Dunkin' Donuts is testing a new polypropylene coffee cup that the company believes could help boost recycling.    More

Image

Plasan investing in capacity, jobs to supply auto market with carbon fiber

September 19, 2014 3:05 pm ET

Growth in the emerging automotive market for carbon-fiber composites has spurred a $29 million investment in a Walker, Mich., factory    More

Image

Hong Kong's TK eyes expansion, may buy Nypro Tool operation

September 19, 2014 2:49 pm ET

Hong Kong-based mold maker and plastics processor TK Group (Holdings) Ltd. said it's reached a tentative agreement to buy a tooling factory in...    More

Image

Toyoda Gosei expanding in Mexico

September 19, 2014 2:33 pm ET

Toyoda Gosei North America Corp. is investing $67 million in a 398,000-square-foot plant in central Mexico to supply the automotive industry with plas...    More

Market Reports

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook – North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events