Sabic touts antimicrobial materials

By Roger Renstrom
Correspondent

Published: February 14, 2013 4:56 pm ET
Updated: February 14, 2013 5:13 pm ET

Image By: Roger Renstrom David Wildgoose displays some of Sabic's new antimicrobial compounds at MD&M West.

Related to this story

Topics End Markets Medical Materials Processes Compounding
Companies & Associations Companies & Associations Sabic Innovative Plastics Saudi Basic Industries Corp./Sabic

ANAHEIM, CALIF. — Sabic Innovative Plastics introduced nine antimicrobial compounds featuring silver technology at the Medical Design & Manufacturing West trade show, held Feb. 12-14 in Anaheim.

"We are building out the portfolio based on expertise in compounding [and] value-based additives" without use of concentrate masterbatches, said David Wildgoose, general manager in North America for Sabic's engineering resins operation in Pittsfield, Mass.

The compounds target the rising incidence of health-care-associated infections.

"A look at the data suggests infections in hospitals are on the rise" and have become an issue in the industry, Wildgoose said.

The nine antimicrobial grades cross four Sabic product families: Lexan high-impact EXL copolymer, Lexan transparent polycarbonate, Xenoy PC/polybutylene terephthalate and polypropylene with or without fiberglass reinforcement.

The range opens the way for Sabic to pursue applications such as hospital high-touch surfaces, portable diagnostic equipment, bedrails and catheters.

Separately, Sabic said it is commercializing Ultem HU1004 polyetherimide resin blend for health-care uses and Ultem DH1004 resin for non-health-care applications.

HU1004 is suitable for multiple cycles of hydrogen peroxide-based sterilization.

Sabic IP is a business of Saudi Basic Industries Corp. of Riyadh, Saudi Arabia.


Comments

Sabic touts antimicrobial materials

By Roger Renstrom
Correspondent

Published: February 14, 2013 4:56 pm ET
Updated: February 14, 2013 5:13 pm ET

Post Your Comments


Back to story


More stories

Image

Amut exec calls for a new approach to improve recycling

April 1, 2015 1:14 pm ET

Things have to change in order for recycling rates to increase and contamination to decrease, said the president of Amut North America during NPE...    More

Image

Sipa shows off what it can do with newly-acquired technology

April 1, 2015 12:15 pm ET

Five months after it bought the injection-stretch-blow molding (ISBM) equipment business of Automa SpA, Sipa SpA is showing how the acquisition has...    More

Image

Wittmann Battenfeld robots rev up for NPE demonstration

March 31, 2015 11:44 am ET

What if robots ran a NASCAR pit crew? The answer to that question was on display at Wittmann Battenfeld Inc.'s exhibit at NPE 2015.    More

Image

Material Insights: Firms announce capacity expansions at NPE

March 30, 2015 12:19 pm ET

Sabic and Eastman both made announcements at NPE, and we catch up with Americhem to discuss the company's nDuramax-brand UV stabilizers for polymeric ...    More

Image

Haitian aims to revolutionize US molders' purchase process

March 27, 2015 9:00 am ET

Haitian International Holdings Ltd. (Booth W3683) is introducing new machines to North American molders with four presses on display at its large boot...    More

Market Reports

Trends in Resin Distribution

The growth of the North American resin distribution market is undeniable - and industry analysts are confident that growth will continue in 2015 and beyond.

This new report analyzes market trends and provides data on historical sales trends for PE (distribution and resellers), PolyOne Distribution figures, U.S. ethylene expansions based on shale gas and natural gas production by category to 2035.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events