Native American tribe invests in MicroGreen Polymers

By Jennifer Kalish
WASTE & RECYCLING NEWS

Published: February 19, 2013 12:55 pm ET
Updated: February 19, 2013 12:58 pm ET

Related to this story

Topics Mergers & Acquisitions, Thermoforming, Food service

ARLINGTON, WASH. -- Koran Andrews, CEO of the Stillaguamish Tribal Enterprise Corp., took a tour of the MicroGreen Polymers Inc. facility in Arlington, Wash., with the intention of purchasing recyclable cups for the tribe's casino.

Not only did the tribe order the cups for its Angel of the Winds Casino, it ended up investing $5 million into the company.

"It was kind of meant to be," Andrews said. "They fall in line with what we value in regards to doing what we can for this planet while we're here. And that's really important to Indian tribes — protecting Mother Earth."

In addition to being recyclable, 50 percent of the PET that goes into InCycle cups and trays comes from recycled water bottles. Using recycled bottles helps prevent a significant amount of plastic from ending up in landfills or getting shipped off to China, said Chris Jacobs, vice president of marketing and product development at MicroGreen. The other 50 percent derives from virgin PET.

"In the U.S. we recycle less than 30 percent of water bottles," said Jacobs. "Consumers know that water bottles are a problem."

After making the commitment to use InCycle cups in the casino, and despite having never invested in other companies before, Andrews felt strongly about investing in MicroGreen.

"After the tour, it became very clear to me that this is a brand new technology that can really do some good," Andrews said. "Not just for our local economy, but for the environment as well."

The tribe's investment to the company is part of a larger effort by MicroGreen to expand its production of recyclable plastic products, Jacobs said.

The company's goal for this round of investments is to receive $20 million in funding, which would create approximately 200 jobs at its pilot facility in Arlington by the end of the year, he said.

Currently, the company has two production lines and employs 40-45 people at the Arlington facility. If its investment goal is reached, the company hopes to add two more production lines, Jacobs said.

Andrews and Jacobs are working together to encourage other Native American tribes to invest in the company. "We have made a number of presentations," Jacobs said. "There's been a lot of interest but nothing press-ready."

MicroGreen offers two varieties of InCycle cups: the 18 ounce cold cup and the 9 ounce coffee cup, though they developed a special 12 ounce cup for the tribe to offer at its casino that should be available at Angel of the Winds soon. The tribe will also offer InCycle cups at the convenience store it is opening in Arlington, Jacobs said.

Before making the switch to InCycle cups, the tribe offered wax-covered paper cups to casino patrons, which are not recyclable.

"They just go directly into the garbage," Andrews said.

The method in which InCycle products are produced is largely accountable for their level of sustainability. The process pressurizes PET with carbon dioxide and warms it enough for the plastic to expand, allowing manufacturers to reduce the amount of source material without using potentially harmful foaming agents, Jacobs said.

Not only is the process inexpensive, but a finished InCycle cup uses 50 percent less plastic and weighs 50 percent to 80 percent less than the average plastic cup.

Jacobs hopes to make the products more readily available for industries such as airlines, food processors and quick-serve restaurants, Jacobs said. The company's priority is to sell to businesses, but the cups can be purchased by consumers online at Amazon.com.

"MicroGreen's cups are generally able to be sold for a more competitive price than your average plastic cup," Andrews said. "There is definitely an economic benefit."


Comments

Native American tribe invests in MicroGreen Polymers

By Jennifer Kalish
WASTE & RECYCLING NEWS

Published: February 19, 2013 12:55 pm ET
Updated: February 19, 2013 12:58 pm ET

Post Your Comments


Back to story


More stories

Image

Coveris changes culture, eyes IPO

November 20, 2014 1:40 pm ET

CEO Gary Masse has a simple message, and some new math, for everyone at Coveris Holdings Corp. Get on board or get out of the way.    More

Image

Total to buy majority stake in Polyblend

November 20, 2014 10:04 am ET

French oil and gas giant Total SA will buy a 68 percent stake in Germany's Polyblend GmbH, a subsidiary of Polymer-Chemie GmbH.    More

Image

Private equity fuels acquisition market

November 18, 2014 11:52 am ET

Plastics firms and outside investors with money to spend increasingly have done so in the plastics industry for the last quarter-century — and...    More

Image

Venture capital firm buys stake in Ximedica

November 17, 2014 3:32 pm ET

International venture capital firm SV Life Sciences has acquired a majority stake in Providence, R.I.-based medical device company Ximedica LLC.    More

Image

A. Schulman closing Ohio color concentrates and additives plant

November 17, 2014 9:48 am ET

A. Schulman Inc. is closing a color concentrates and additives plant in Ohio that it acquired earlier this year from Ferro Corp.    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events