US bag and film recycling surpasses 1 billion pounds

By Gayle S. Putrich
Staff Reporter

Published: February 25, 2013 7:11 pm ET
Updated: February 25, 2013 8:21 pm ET

Related to this story

Topics Packaging, Sustainability, Recycling, Materials Suppliers, Grocery bags, Pallets/skids/materials handling, Shrink film
Companies & Associations American Chemistry Council

WASHINGTON — In 2011, more than 1 billion pounds of post-consumer plastic bags and films were collected for recycling in the United States, according to a new report.

That's a 4 percent increase from 2010 and a 55 percent increase from the 652.4 million pounds collected in 2005, according to the National Postconsumer Plastic Bag & Film Recycling Report, released Feb. 25 by the American Chemistry Council.

The report attributed the increase to growth in plastic and composite decking. Deck manufacturers accounted for 55 percent of the post-consumer film that was recycled, and they purchased 120 million more pounds of material in 2011 than they did in 2010.

The second largest market, film and sheet manufacturers, held steady at 100 million pounds in 2011, accounting for 16 percent of the total.

For the second year in a row, the majority of the post-consumer film collected in the United States was processed in the U.S. and Canada — 58 percent or 583 million pounds — with the remainder exported overseas.

Domestic volume was up 5 percent from 2010.

Mark Murray, executive director of Californians Against Waste, said there are some positive notes for environmentalists in the data, but they have to look past the modest increases in recycling rates.

"There's two bits of good news in the sense that the processing rate… has gone up a modest amount, 24 million pounds. And there's a shift… in terms of a greater percentage of the amount collected is going to North American processors rather than being shipped overseas. But there is still a lot of plastic film, plastic shrink-wrap, that is very recyclable that gets collected at the back of stores that is not being recycled," Murray said.

Moore Recycling Associates Inc. of Sonoma, Calif., has collected data for the annual bag and film recycling report for seven years.

The largest category of recycled film is what Moore Recycling calls "commercial clear" — clear, clean polyethylene film including stretch wrap and poly bags. The material accounts for 47 percent of the film that is recycled, a figure that is falling. Exactly how much it has dropped is difficult to pinpoint, though, in part because since this year's survey includes a new category, mixed color commercial film.

The report also notes that changes in the shipping market may have attributed to the decline for commercial clear film, including warehouse consolidation and adjustments in how retailers prepare pallets for shipment.

Murray said there needs to be more focus to recover commercial clear and other post-industrial, pre-consumer films.

"We need to get that behind-the-store shrink-wrap back into the recycling infrastructure," he said. "And really, this 'post-industrial, pre-consumer' plastic represents a success story that 10 years ago those were all corrugated boxes, which are much worse than shrink wrap for the environment," Murray said.

"It seems to me that we're moving in the right direction," he said.

The report estimated that 151 million pounds of post-consumer bags and sacks were recovered in 2011, a 19 percent increase from 2010. But the report cautioned that the lack of consistent data created uncertainty in this category.

The report also noted increases in other film categories, including curbside film collection. But it noted that the amount of curbside film being used domestically actually decreased in 2011. Curbside film is challenging to reprocess and the cost often exceeds the value of the end product, according to the report.

Information for the report was based on recovery data from 19 U.S. and three Canadian end users of post-consumer film and 37 companies that export consumer film.

ACC noted that there are currently more than 15,000 U.S. locations where consumers can bring their used polyethylene bags and wraps to be recycled, primarily at large grocery and retail chains.

"In-store collection is absolutely critical for recycling plastic bags, wraps and other flexible film packaging," said Steve Russell, ACC's vice president of plastics, in a news release.

"The infrastructure is there. The plastic film industry is now working to help grocers and retailers maximize the collection of this valuable material by sharing tools and best practices and through consistent customer education," he said.


Comments

US bag and film recycling surpasses 1 billion pounds

By Gayle S. Putrich
Staff Reporter

Published: February 25, 2013 7:11 pm ET
Updated: February 25, 2013 8:21 pm ET

Post Your Comments


Back to story


More stories

Image

Report: Brands are falling short on packaging sustainability

January 29, 2015 5:19 pm ET

Packaging in general, and plastic packaging in particular, has a long way to go in terms of recycling, according to a pair of environmental groups.    More

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Profit dips at Bemis Co. Inc.

January 29, 2015 2:04 pm ET

Profit dipped for Bemis Co. Inc. for all of 2014, but were up during the fourth quarter in what the company's leader called a “pivotal year....    More

Image

Materials firms look for stock rebound

January 29, 2015 1:52 pm ET

DuPont Co., A. Schulman Inc. and Rogers Corp. thrived amid the stock market chaos of 2014, but the other 12 publicly held materials firms tracked by...    More

Image

Chemtrusion, Mytex Indiana compounding plant set for expansion

January 29, 2015 1:35 pm ET

Japanese and American partners in a compounding plant in Indiana plan to expand the facility.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events