Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Image By: KraussMaffei Corp. KraussMaffei's 400-tonne GX press

Related to this story

Topics Automotive, Injection Molding, Machinery, Molds/Tooling, Injection molds
Companies & Associations KraussMaffei AG

WARREN, MICH. — North American automotive plastics plants are investing in new injection presses and are more open than ever to brand-new technologies such as spinning cube molds and multishot molding, according to executives at KraussMaffei Corp. and Proper Group International Inc.

About 90 people attended a TechDay event Feb. 1 at the Warren headquarters of Proper Group, an automotive toolmaker and molder. The crowd got the first look at KM's GX machine in the U.S.

"The reason they're looking to the next wave of technology is to help reduce costs, for the overall production," said Paul Caprio, CEO of KraussMaffei Corp., the U.S. unit of Munich-based KraussMaffei AG.

Automotive is one of the most important markets for the plastics machinery sector. Caprio said automotive generates about 50 percent of business at KraussMaffei AG. The German company generates order income of about $1.5 billion.

KraussMaffei Corp. is based in Florence, Ky. The machinery maker created a joint venture with Proper Group in 2010 to get greater visibility in Detroit. Proper Group gets access to new machinery technology at its mold-making operations and its Proper Polymers molding plant in Anderson, S.C., and at a new, smaller molding facility in Warren. Proper runs six injection presses in Warren — five of them KraussMaffeis — in clamping forces of 85-3,000 metric tons. The company's Anderson molding plant has 24 presses, from 55-1,500 tonnes; five of them are new KM machines.

Joe Grippe, Proper Group vice president, said the Anderson site is getting an 850-tonne KraussMaffei SpinForm press with a cube mold mounted on a rotary table. He said Proper wants to show how the technology can be used to mold automotive lighting and other multicomponent parts.

Proper Group plans to manufacture molds for the spinning-cube machines, Grippe said.

Caprio said SpinForm presses are molding automotive parts in other parts of the world. "It's time that gets to North America," he said.

Grippe also said Proper Group is looking to open molding plants in the Tennessee/Alabama area and in Mexico.

TechDay centered on the molding demonstration area in Warren. "This facility across the street is going to be a specialty facility for two-shot," said Joe Grippe, Proper vice president, speaking at the headquarters building. "We're running lenses in there, and really capitalizing on the technology that KraussMaffei brings to the table."

At the event, a 1,600-tonne MXZ multicomponent machine was running a two-color taillight, in clear and red acrylic.

KM used TechDay for the U.S. premier of its GX line of injection molding machines, which the company first showed at the Fakuma show in Germany last fall. A 400-tonne GX was molding parts in Warren. The complete line ranges from 400-650 tonnes

Caprio said KraussMaffei engineers wanted to develop a durable two-platen press for the middle price range. Features include a GearX clamping unit that uses a set of locking nuts, and a GuideX guide shoe that stabilizes the moving platen. GuideX uses a new type of fixed bearing joint that the company said greatly reduces friction.

KM and Proper also showed off a 180-tonne, all-electric AX press.

"We're an engineering-oriented company and always looking to go to the next technology, and be the differentiator," Grippe said.


Comments

Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Post Your Comments


Back to story


More stories

Image

Compression molding offers alternative for cap production

October 2, 2014 1:42 pm ET

While it may seem like injection molding is the only way to produce caps and closures, it turns out to be far from the truth. Compression molding is...    More

Image

Integrated plastic/metal injection molding helps cars trim weight

October 2, 2014 11:17 am ET

Although it consumes a scant 9 percent of European plastics production, the auto industry is driving plastics research in the region, said Mathias...    More

Image

Helix gets FDA compliance for another medical device facility

October 2, 2014 10:50 am ET

Helix Medical LLC's Baldwin Park, Calif., facility has attained compliance with the federal regulation for quality systems for medical devices.    More

Image

GM's long-term goals look to China, Cadillac, better supplier relations

October 2, 2014 10:02 am ET

General Motors Co.'s China plan includes $14 billion in investments by its joint ventures to open five new auto assembly plants by 2018, with a goal...    More

Image

Blow molding machinery maker opens first plant in Taiwan

October 1, 2014 1:27 pm ET

Taiwanese equipment maker Kin Precision Industry Co. Ltd. has opened a 2,000-square-meter, 25-employee factory in Taichung, Taiwan, with an eye to con...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events