Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Image By: KraussMaffei Corp. KraussMaffei's 400-tonne GX press

Related to this story

Topics Automotive, Injection Molding, Injection molds, Machinery, Molds/Tooling
Companies & Associations KraussMaffei AG

WARREN, MICH. — North American automotive plastics plants are investing in new injection presses and are more open than ever to brand-new technologies such as spinning cube molds and multishot molding, according to executives at KraussMaffei Corp. and Proper Group International Inc.

About 90 people attended a TechDay event Feb. 1 at the Warren headquarters of Proper Group, an automotive toolmaker and molder. The crowd got the first look at KM's GX machine in the U.S.

"The reason they're looking to the next wave of technology is to help reduce costs, for the overall production," said Paul Caprio, CEO of KraussMaffei Corp., the U.S. unit of Munich-based KraussMaffei AG.

Automotive is one of the most important markets for the plastics machinery sector. Caprio said automotive generates about 50 percent of business at KraussMaffei AG. The German company generates order income of about $1.5 billion.

KraussMaffei Corp. is based in Florence, Ky. The machinery maker created a joint venture with Proper Group in 2010 to get greater visibility in Detroit. Proper Group gets access to new machinery technology at its mold-making operations and its Proper Polymers molding plant in Anderson, S.C., and at a new, smaller molding facility in Warren. Proper runs six injection presses in Warren — five of them KraussMaffeis — in clamping forces of 85-3,000 metric tons. The company's Anderson molding plant has 24 presses, from 55-1,500 tonnes; five of them are new KM machines.

Joe Grippe, Proper Group vice president, said the Anderson site is getting an 850-tonne KraussMaffei SpinForm press with a cube mold mounted on a rotary table. He said Proper wants to show how the technology can be used to mold automotive lighting and other multicomponent parts.

Proper Group plans to manufacture molds for the spinning-cube machines, Grippe said.

Caprio said SpinForm presses are molding automotive parts in other parts of the world. "It's time that gets to North America," he said.

Grippe also said Proper Group is looking to open molding plants in the Tennessee/Alabama area and in Mexico.

TechDay centered on the molding demonstration area in Warren. "This facility across the street is going to be a specialty facility for two-shot," said Joe Grippe, Proper vice president, speaking at the headquarters building. "We're running lenses in there, and really capitalizing on the technology that KraussMaffei brings to the table."

At the event, a 1,600-tonne MXZ multicomponent machine was running a two-color taillight, in clear and red acrylic.

KM used TechDay for the U.S. premier of its GX line of injection molding machines, which the company first showed at the Fakuma show in Germany last fall. A 400-tonne GX was molding parts in Warren. The complete line ranges from 400-650 tonnes

Caprio said KraussMaffei engineers wanted to develop a durable two-platen press for the middle price range. Features include a GearX clamping unit that uses a set of locking nuts, and a GuideX guide shoe that stabilizes the moving platen. GuideX uses a new type of fixed bearing joint that the company said greatly reduces friction.

KM and Proper also showed off a 180-tonne, all-electric AX press.

"We're an engineering-oriented company and always looking to go to the next technology, and be the differentiator," Grippe said.


Comments

Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Post Your Comments


Back to story


More stories

Image

Injection molder, recycler Polyvulc USA puts itself up for sale

July 24, 2014 12:41 pm ET

Fred Farrell and Larry Lambiotte, founders of Polyvulc USA Inc. and its subsidiaries Polyvulc Tire Recycling Llc and Winnsboro Rubber Recycling LLC,...    More

OSHA probes alleged asthma link to Lear's Selma, Ala., plant

July 23, 2014 11:58 am ET

U.S. foam manufacturer Renosol Seating LLC is being investigated following allegations its workers are at risk of asthma from TDI exposure at its...    More

Image

Munson Machinery expanding assembly, testing operations

July 22, 2014 2:02 pm ET

Munson Machinery Co. Inc. is expanding its headquarters factory by about one-third in Utica, N.Y., where the company makes mixing, blending and size-...    More

Image

Illinois injection molder expands

July 21, 2014 1:23 pm ET

Automotive supplier All-Rite Industries Inc. has added two new injection molding machines to its operations.    More

Image

Windmöller & Hölscher looking to continued growth in China

July 21, 2014 3:40 pm ET

With 2013 global sales of 600 million euros, China has grown into an important export market for Windmöller & Hölscher KG, second only to the United S...    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events