Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Image By: KraussMaffei Corp. KraussMaffei's 400-tonne GX press

Related to this story

Topics Automotive, Injection Molding, Machinery, Molds/Tooling, Injection molds
Companies & Associations KraussMaffei AG

WARREN, MICH. — North American automotive plastics plants are investing in new injection presses and are more open than ever to brand-new technologies such as spinning cube molds and multishot molding, according to executives at KraussMaffei Corp. and Proper Group International Inc.

About 90 people attended a TechDay event Feb. 1 at the Warren headquarters of Proper Group, an automotive toolmaker and molder. The crowd got the first look at KM's GX machine in the U.S.

"The reason they're looking to the next wave of technology is to help reduce costs, for the overall production," said Paul Caprio, CEO of KraussMaffei Corp., the U.S. unit of Munich-based KraussMaffei AG.

Automotive is one of the most important markets for the plastics machinery sector. Caprio said automotive generates about 50 percent of business at KraussMaffei AG. The German company generates order income of about $1.5 billion.

KraussMaffei Corp. is based in Florence, Ky. The machinery maker created a joint venture with Proper Group in 2010 to get greater visibility in Detroit. Proper Group gets access to new machinery technology at its mold-making operations and its Proper Polymers molding plant in Anderson, S.C., and at a new, smaller molding facility in Warren. Proper runs six injection presses in Warren — five of them KraussMaffeis — in clamping forces of 85-3,000 metric tons. The company's Anderson molding plant has 24 presses, from 55-1,500 tonnes; five of them are new KM machines.

Joe Grippe, Proper Group vice president, said the Anderson site is getting an 850-tonne KraussMaffei SpinForm press with a cube mold mounted on a rotary table. He said Proper wants to show how the technology can be used to mold automotive lighting and other multicomponent parts.

Proper Group plans to manufacture molds for the spinning-cube machines, Grippe said.

Caprio said SpinForm presses are molding automotive parts in other parts of the world. "It's time that gets to North America," he said.

Grippe also said Proper Group is looking to open molding plants in the Tennessee/Alabama area and in Mexico.

TechDay centered on the molding demonstration area in Warren. "This facility across the street is going to be a specialty facility for two-shot," said Joe Grippe, Proper vice president, speaking at the headquarters building. "We're running lenses in there, and really capitalizing on the technology that KraussMaffei brings to the table."

At the event, a 1,600-tonne MXZ multicomponent machine was running a two-color taillight, in clear and red acrylic.

KM used TechDay for the U.S. premier of its GX line of injection molding machines, which the company first showed at the Fakuma show in Germany last fall. A 400-tonne GX was molding parts in Warren. The complete line ranges from 400-650 tonnes

Caprio said KraussMaffei engineers wanted to develop a durable two-platen press for the middle price range. Features include a GearX clamping unit that uses a set of locking nuts, and a GuideX guide shoe that stabilizes the moving platen. GuideX uses a new type of fixed bearing joint that the company said greatly reduces friction.

KM and Proper also showed off a 180-tonne, all-electric AX press.

"We're an engineering-oriented company and always looking to go to the next technology, and be the differentiator," Grippe said.


Comments

Auto suppliers beefing up technology

By Bill Bregar
Senior Staff Reporter

Published: February 25, 2013 1:34 pm ET
Updated: February 25, 2013 2:02 pm ET

Post Your Comments


Back to story


More stories

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion —...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Taipei Plas vandal and German firm trade lawsuits

November 25, 2014 1:26 pm ET

Taiwan businessman Karma Tang, who splashed red paint at German firm Baumüller GmbH's Taipei Plas booth, is in a messy legal battle.    More

Image

Auxiliary equipment maker Ross expands in India

November 25, 2014 1:12 pm ET

U.S. auxiliary equipment maker Charles Ross & Son Co. is expanding in India, opening a new plant early next year in Pune.    More

Image

Uni Cap to build cap molding plant in Jordan

November 25, 2014 12:57 pm ET

The Persian Gulf's largest molder of caps and closures is investing $10 million in a new factory near Amman, Jordan, as part of an effort to boost its...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events