Demand driving ThermoFlex growth

By Michael Lauzon
Correspondent

Published: February 26, 2013 2:48 pm ET
Updated: February 26, 2013 3:12 pm ET

ThermoFlex thermoformed tray

Image By: grafik-allure LLC photo ThermoFlex LLC's thermoformed tray with injection molded thermoplastic urethane inserts that help hold delicate parts

Related to this story

Topics Automotive Packaging Thermoforming
Companies & Associations

MORRISON, TENN. -- ThermoFlex LLC is growing to meet demand for returnable auto parts packaging.

"Demand is driving our capacity to its limitations," said Greg Hancock, ThermoFlex vice president and general manager, in a telephone interview.

"We need equipment for more capacity, bigger part size and cost effectiveness," Hancock said from ThermoFlex's Morrison, Tenn., operation.

The firm's expansion includes a three-station, rotary thermoformer supplied by Monark Equipment Technologies in Auburn, Mich. The new machine, when installed in early March, will allow ThermoFlex to increase part size to 6 feet by 10 feet and improve energy efficiency.

ThermoFlex's product line includes trays, dunnage, material-handling components and other returnable packaging for automotive OEMs and their suppliers. The main body of the packaging is made of thermoformed or vacuum formed commodity resins like polyethylene, ABS, and polypropylene.

Much of the packaging contains injection molded or reaction injection molded polyurethane or thermoplastic rubber inserts to help hold delicate parts, such as transmission components, in place during transportation.

To boost insert production, ThermoFlex is adding several injection molding presses with clamping forces of 150-700 tons in Morrison. Many of the presses will be transferred from sister company PolyFlex Products LLC of Farmington Hills, Mich.

Hancock and PolyFlex CEO Mark Kirchmer declined to provide the cost of the ThermoFlex expansion.

"The OEM gives us a part and we design, make and supply packaging for it," Hancock said.

Besides automotive, ThermoFlex is branching into other markets such as trucks, buses and recreational vehicles. It already is diversified in urethane-coated rollers and parts for conveyors, tool-protection holders for metalworking, a range of assembly tools, bumpers, enclosures, grippers, covers, part protectors, wipers and seals.

Hancock said the Morrison operation includes in-line thermoforming of purchased sheet. Eventually it plans to add cut sheet lines to the mix.

ThermoFlex expects to add 10-15 employees, more than doubling its staff, after the expansion.

ThermoFlex and PolyFlex share some common ownership and are management-owned.

PolyFlex was established in 2003 with fewer than 10 employees, recalled Kirchmer. By 2012 it had grown to 49 full-time and 28 part-time positions.

PolyFlex moved from Livonia, Mich., to Farmington Hills in early 2012 to consolidate manufacturing from two plants and to share administration and engineering with ThermoFlex. The consolidation involved a small urethane molder PolyFlex acquired in 2007.

PolyFlex focuses on returnable packaging more so than ThermoFlex. It started in the appliance sector and has grown into automotive. It runs eight injection presses in Farmington Hills, with clamping forces of 200-1,000 tons. It exports globally.

"We see more opportunity to replace paperboard components with plastic," Kirchmer explained in the telephone interview.

Plastic part nests can be returnable or expendable.

PolyFlex molds urethane, plastics and rubbers and also does foamed urethane.


Comments

Demand driving ThermoFlex growth

By Michael Lauzon
Correspondent

Published: February 26, 2013 2:48 pm ET
Updated: February 26, 2013 3:12 pm ET

Post Your Comments


Back to story


More stories

Image

Panel seeks to bridge the gap between designers, engineers

March 30, 2015 2:24 pm ET

The role of the industrial designer in manufacturing is a familiar one to many, but the relationship between designer and engineer is often fraught...    More

Image

Uponor sells plastic pipe machinery business to focus on core units

March 30, 2015 2:13 pm ET

Uponor Corp., the Finland-based maker of plastic pipe systems for plumbing, underfloor heating and cooling and infrastructure, announced March 30...    More

Image

MSI Mold Builders expands in Iowa, eyes automotive market

March 30, 2015 1:54 pm ET

MSI Mold Builders has recently completed a 12,000-square-foot expansion to its Cedar Rapids, Iowa, plant, bringing its total footprint to just under...    More

Image

Dow Chemical sees potential for PE growth in packaging

March 30, 2015 1:17 pm ET

The packaging market continues to provide growth for the polyethylene business of Dow Chemical Co. — which is a good thing, since the firm will ...    More

Image

TPUs finding applications in drug-delivery applications

March 30, 2015 12:56 pm ET

Lubrizol Corp. is sending its thermoplastic polyurethane products into medical products, foam and film.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events