Demand driving ThermoFlex growth

By Michael Lauzon
Correspondent

Published: February 26, 2013 2:48 pm ET
Updated: February 26, 2013 3:12 pm ET

ThermoFlex thermoformed tray

Image By: grafik-allure LLC photo ThermoFlex LLC's thermoformed tray with injection molded thermoplastic urethane inserts that help hold delicate parts

Related to this story

Topics Automotive, Packaging, Thermoforming

MORRISON, TENN. -- ThermoFlex LLC is growing to meet demand for returnable auto parts packaging.

"Demand is driving our capacity to its limitations," said Greg Hancock, ThermoFlex vice president and general manager, in a telephone interview.

"We need equipment for more capacity, bigger part size and cost effectiveness," Hancock said from ThermoFlex's Morrison, Tenn., operation.

The firm's expansion includes a three-station, rotary thermoformer supplied by Monark Equipment Technologies in Auburn, Mich. The new machine, when installed in early March, will allow ThermoFlex to increase part size to 6 feet by 10 feet and improve energy efficiency.

ThermoFlex's product line includes trays, dunnage, material-handling components and other returnable packaging for automotive OEMs and their suppliers. The main body of the packaging is made of thermoformed or vacuum formed commodity resins like polyethylene, ABS, and polypropylene.

Much of the packaging contains injection molded or reaction injection molded polyurethane or thermoplastic rubber inserts to help hold delicate parts, such as transmission components, in place during transportation.

To boost insert production, ThermoFlex is adding several injection molding presses with clamping forces of 150-700 tons in Morrison. Many of the presses will be transferred from sister company PolyFlex Products LLC of Farmington Hills, Mich.

Hancock and PolyFlex CEO Mark Kirchmer declined to provide the cost of the ThermoFlex expansion.

"The OEM gives us a part and we design, make and supply packaging for it," Hancock said.

Besides automotive, ThermoFlex is branching into other markets such as trucks, buses and recreational vehicles. It already is diversified in urethane-coated rollers and parts for conveyors, tool-protection holders for metalworking, a range of assembly tools, bumpers, enclosures, grippers, covers, part protectors, wipers and seals.

Hancock said the Morrison operation includes in-line thermoforming of purchased sheet. Eventually it plans to add cut sheet lines to the mix.

ThermoFlex expects to add 10-15 employees, more than doubling its staff, after the expansion.

ThermoFlex and PolyFlex share some common ownership and are management-owned.

PolyFlex was established in 2003 with fewer than 10 employees, recalled Kirchmer. By 2012 it had grown to 49 full-time and 28 part-time positions.

PolyFlex moved from Livonia, Mich., to Farmington Hills in early 2012 to consolidate manufacturing from two plants and to share administration and engineering with ThermoFlex. The consolidation involved a small urethane molder PolyFlex acquired in 2007.

PolyFlex focuses on returnable packaging more so than ThermoFlex. It started in the appliance sector and has grown into automotive. It runs eight injection presses in Farmington Hills, with clamping forces of 200-1,000 tons. It exports globally.

"We see more opportunity to replace paperboard components with plastic," Kirchmer explained in the telephone interview.

Plastic part nests can be returnable or expendable.

PolyFlex molds urethane, plastics and rubbers and also does foamed urethane.


Comments

Demand driving ThermoFlex growth

By Michael Lauzon
Correspondent

Published: February 26, 2013 2:48 pm ET
Updated: February 26, 2013 3:12 pm ET

Post Your Comments


Back to story


More stories

Image

Brown signs California's plastic bag ban into law

September 30, 2014 1:38 pm ET

Gov. Jerry Brown (D) made it official today: plastic bags are banned across the entire state of California.    More

Image

New Hexcel plant will supply carbon fiber for Airbus A350 XWB

September 30, 2014 2:43 pm ET

Hexcel Corp. is investing $250 million on a new carbon fiber plant in France, with part of the production going into the future Airbus SAS A350 XWB.    More

Image

Welding equipment supplier Forward completes expansion

September 30, 2014 4:08 pm ET

Plastic welding equipment producer Forward Technology completed an expansion it predicts will help customers become more efficient and cut costs.    More

Image

Extreme Tool uses remote Michigan location to attract younger workers

September 30, 2014 3:47 pm ET

“I'm not saying there's anything wrong with being an old guy like me. But I do believe in the power of youth and reinvesting in training. The...    More

Image

LyondellBasell CEO Gallogly to retire

September 30, 2014 3:00 pm ET

James Gallogly, CEO of Houston-based polyolefins producer LyondellBasell Industries NV, on Sept. 29 announced plans to retire in 2015.    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events