India to review anti-dumping duty on Chinese injection presses

By Satnam Singh
Correspondent

Published: February 26, 2013 1:47 pm ET
Updated: February 26, 2013 1:50 pm ET

Related to this story

Topics Machinery, Government & Legislation

BANGALORE, INDIA — Later this year, India's Ministry of Commerce and Industry will review whether to continue anti-dumping duties on Chinese-made injection molding machines.

Machinery suppliers commented about the pending decision at the Plastasia trade show, held Feb. 22-25 in Bangalore.

India imposed tariffs of up to 174 percent on many Chinese molding machines starting in 2009, but the five-year term for the tariffs is nearly finished.

The injection press market in India has changed significantly since 2009. One major change: L&T Plastic Machinery Ltd., which played a key role in convincing the Indian government to impose the duties, was sold to Toshiba Machine Co. Ltd. in late 2012.

Also, while sales of Chinese-made presses have suffered, manufacturers from Taiwan and Malaysia have stepped up efforts in India, executives said at Plastasia.

However, a weak rupee has made imported machines more expensive, so even manufacturers of lower cost presses are reporting flat-to-weak sales in India.

"Interestingly, the government is losing even [its] 7.5 percent import duty as Chinese machinery continue to pour in via Malaysia, with whom India has signed [a free-trade agreement]," said Milind Agnihotry, general sales manager for Zhafir Plastics Machinery Ltd., a subsidiary of Chinese press maker Haitian International Holdings.

Haitian has invested in overseas factories in recent years, in Vietnam, Brazil, Turkey and Germany, and it has offices and service centers in India, Japan and the United States. Agnihotry was optimistic about the company expanding its operations in India — if the Indian government responds positively on the anti-dumping question.

"We have some plans, but until barriers are removed, the best could not be brought here. We don't know when the conditions would become conducive again for [an] India foray," Agnihotry said.

Zhafir shipped almost 300 machines to India in 2011. In the current fiscal year — which ends in March — it has already sold around 270 machines, so the company expects 2012 sales in India to be flat compared to 2011.

Tianan, Taiwan-based Huarong Plastic Machinery Co. Ltd. sold about $4 million in injection presses in India in 2012, according to Grace Lee, the company's manager for India and Africa.

"Last year was not such a bad year for us. Despite volatile currency fluctuations in India, we were down by 10 percent over the previous year," Lee said.

"Compared to that, [our] China business was down by almost 35 percent," Lee said. Sales in China suffered from the slowdown in growth for plastics manufacturers that export outside China.

"[The] China market is huge, but heavily depends on export orders. If the companies continue to get export orders, they keep sourcing machine from us," Lee said.

A big order placed at the end of 2012 by a prominent vendor for Videocon Industries Ltd. helped improve Huarong's sales in India last year. Huarong entered the India market in 2010 and recorded growth of about 10 percent growth in 2011.

In an effort to rekindle growth in the subcontinent, Huarong has introduced vertical injection presses in India.

"We were selling only the horizontal presses until last year, which are affected by the weak Indian rupee against [the] dollar. Besides, competition is more in the horizontal presses from local as well as overseas suppliers," Lee said.

"Few other Taiwanese companies are supplying the vertical lines in India, therefore, less competition and bright growth prospects," Lee explained.

Huarong opened an Indian headquarters in Delhi in 2012, and it has regional sales and service operations in Pune, Ahmedabad and Bangalore.

Another Taiwanese press supplier, Jon Wai Machinery Works Co. Ltd., sold about 80 presses in 2012, down from its annual average of about 100.

"The first half was slow last year but [the] auto parts industry picks up in the second half and that improves our sales," said Jon Wai's Harrison Chun. Also, India's currency appears to have stabilized.

"Therefore, buyers have started placing orders again as they could not postpone the sourcing anymore," Chun said.

The company's overall sales also suffered from the financial meltdown in Europe, Chun said.

Jon Wai hopes to regain the lost ground this year. The company is seeing growth in western and southern India thanks to investment in the automotive sector.

Malaysian press suppliers gained ground in recent years thanks to a free trade agreement with India.

"We are selling on an average about 100 injection molding lines every year in India," said Han Changhua of Klang, Malaysia-based ESM Precise Manufacturing Sdn. Bhd.

"We are pricewise competitive thanks to [the free-trade agreement], as our machinery is not levied with a 7.5 percent import duty." The company hopes to sell 150 machines in India this year.

ESM has sold presses as large as 2,300 metric tons of clamping force in India, but said 400-ton models are more popular in the region.


Comments

India to review anti-dumping duty on Chinese injection presses

By Satnam Singh
Correspondent

Published: February 26, 2013 1:47 pm ET
Updated: February 26, 2013 1:50 pm ET

Post Your Comments


Back to story


More stories

Image

ATS goes global with acquisition of M+W Process Automation

September 10, 2014 2:49 pm ET

ATS Automation Tooling Systems Inc., a maker of factory automation systems in Cambridge, Ontario, has agreed to buy a German company M+W Process...    More

Image

Orenda says new pulverizer improves efficiency through cooling

September 10, 2014 1:41 pm ET

Orenda Automation Technologies Inc. will unveil a new pulverizer with new cooling technology at the Rotoplas conference for rotational molders, Oct....    More

Image

Material handing systems maker expanding Kentucky operations

September 9, 2014 1:47 pm ET

Intelligrated Inc., which makes material conveying and palletizing equipment for warehousing and distribution, and manufacturing, is expanding its...    More

Image

W. Amsler Equipment adds CNC capability

September 8, 2014 1:40 pm ET

RICHMOND HILL, ONTARIO — W. Amsler Equipment Inc. has added its first computer numerically controlled milling machine — a key investment...    More

Image

Auxiliary maker Piovan to start assembly operation in India

September 8, 2014 2:24 pm ET

MUMBAI — Italian auxiliary equipment manufacturer Piovan SpA is eying the growing auxiliary market in India, and now plans to start assembling s...    More

Market Reports

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events