Midwest Mattress Recovery becomes first mattress recycler in Wisconsin

By Kerri Jansen
WASTE & RECYCLING NEWS

Published: March 13, 2013 11:17 am ET
Updated: March 13, 2013 11:19 am ET

Related to this story

Topics Sustainability, Recycling

WATERTOWN, WIS. — Lacking an in-state recycling facility for mattresses, some municipalities and companies have been sending their mattresses from Wisconsin to Ohio. That is one of the reasons Bob Mudler said he was launching the state's first mattress recycling facility.

Wisconsin, a state known for its aggressive recycling agenda, is getting its first full-service mattress recycler.

Bob Mudler, who has more than 16 years of experience in the waste management industry, launched Midwest Mattress Recovery in his hometown of Watertown, Wis., in early March.

While running a waste consulting company to help companies optimize their waste streams, Mudler discovered a lack of alternative solutions to throwing mattresses in a landfill, where they don't compact well and become a hazard when springs pop out and get tangled in machinery.

"I discovered an increased need for this service in the state of Wisconsin over the course of the last year or so," Mudler said. "Companies started asking, 'What can we do with our mattresses besides throwing them in landfills, because we really don't want to do that any more.'"

Lacking an in-state recycler, some local governments and businesses send mattresses to a recycling facility in Ohio, said Cynthia Moore, recycling program coordinator for the Wisconsin Department of Natural Resources. But most unwanted mattresses likely end up in landfills. The DNR doesn't yet have definite numbers regarding the amount of mattresses generated in the state, but Moore said Madison, Wis., spends $100,000 each year on curbside mattress collection and disposal, so the city would welcome an alternative.

Watertown is located about midway between Madison and Milwaukee, the state's major metropolitan areas. Mudler said he expects to process about 2,000 to 3,000 mattresses per month for a total of 25,000 to 35,000 pieces in the business' first year. Several municipalities, hospitality companies and a major university have already expressed "tremendous interest" in working with the company to recycle their mattresses, he said. The Wisconsin DNR has also lent its support.

"We think it's wonderful, absolutely wonderful," Moore said. "Wisconsin's got a great recycling ethic, and in addition to that, mattress recycling is one of the more expensive items for community recycling programs, and they're also a real nuisance to handle at landfills, and handling mattresses has been sort of a constant burden and worry for local governments, so we're absolutely delighted that this individual has taken the initiative to set up a mattress recycling facility in Wisconsin."

Mudler has his eye on becoming one of the largest mattress recyclers in the nation, and in five years aims to be processing 50,000 to 75,000 pieces per year.

Each mattress at Midwest Mattress Recovery will be disassembled manually to recover recyclable metal, polyurethane foam, wood and cotton batting. The first three materials will be sent to separate Wisconsin processors; Mudler is still looking for a home for cotton batting.

Midwest Mattress Recovery will be able to provide pickup service where financially worthwhile and will accept mattresses from in-state and out-of-state sources, Mudler said. The company is also testing a program to recycle upholstered furniture, although the pilot program is not open to the public.

The company accepted more than 270 pieces for recycling before its official open date March 4.

"It's really been a lot of fun getting going; this is like a big puzzle and I've just been trying to put together the pieces," Mudler said. "Everything from finding the right space to getting insurance to employing labor; it's been a tremendous learning experience for me and I've really had a lot of fun with it."


Comments

Midwest Mattress Recovery becomes first mattress recycler in Wisconsin

By Kerri Jansen
WASTE & RECYCLING NEWS

Published: March 13, 2013 11:17 am ET
Updated: March 13, 2013 11:19 am ET

Post Your Comments


Back to story


More stories

PE suppliers go after oxo-biodegradable technology in Mexico

July 31, 2014 1:12 pm ET

Mexican industry defends itself, calling claims 'misleading'    More

Bioplastic created using rice starch

July 31, 2014 10:40 am ET

The new transparent, biodegradable material has a high degree of mechanical strength and good thermal resistance.    More

Image

DC banning PS foam containers

July 30, 2014 2:34 pm ET

Washington D.C. Mayor Vincent Gray signed into law on July 29 a bill that will ban polystyrene foam food and drink containers from the District.    More

Image

Sainsbury, Schoeller Allibert to recycle food handling crates

July 30, 2014 1:37 pm ET

British retail group Sainsbury's has contracted Dutch recycler Schoeller Allibert BV to reprocess all of its old food crates back into food-grade...    More

Image

Vinyl siding's lead slips, but industry pushing back

July 29, 2014 2:04 pm ET

Vinyl siding continues to be the top cladding choice for home builders and remodelers but fiber cement is gaining ground — at an alarming rate t...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events