Midwest Mattress Recovery becomes first mattress recycler in Wisconsin

By Kerri Jansen
WASTE & RECYCLING NEWS

Published: March 13, 2013 11:17 am ET
Updated: March 13, 2013 11:19 am ET

Related to this story

Topics Sustainability, Recycling

WATERTOWN, WIS. — Lacking an in-state recycling facility for mattresses, some municipalities and companies have been sending their mattresses from Wisconsin to Ohio. That is one of the reasons Bob Mudler said he was launching the state's first mattress recycling facility.

Wisconsin, a state known for its aggressive recycling agenda, is getting its first full-service mattress recycler.

Bob Mudler, who has more than 16 years of experience in the waste management industry, launched Midwest Mattress Recovery in his hometown of Watertown, Wis., in early March.

While running a waste consulting company to help companies optimize their waste streams, Mudler discovered a lack of alternative solutions to throwing mattresses in a landfill, where they don't compact well and become a hazard when springs pop out and get tangled in machinery.

"I discovered an increased need for this service in the state of Wisconsin over the course of the last year or so," Mudler said. "Companies started asking, 'What can we do with our mattresses besides throwing them in landfills, because we really don't want to do that any more.'"

Lacking an in-state recycler, some local governments and businesses send mattresses to a recycling facility in Ohio, said Cynthia Moore, recycling program coordinator for the Wisconsin Department of Natural Resources. But most unwanted mattresses likely end up in landfills. The DNR doesn't yet have definite numbers regarding the amount of mattresses generated in the state, but Moore said Madison, Wis., spends $100,000 each year on curbside mattress collection and disposal, so the city would welcome an alternative.

Watertown is located about midway between Madison and Milwaukee, the state's major metropolitan areas. Mudler said he expects to process about 2,000 to 3,000 mattresses per month for a total of 25,000 to 35,000 pieces in the business' first year. Several municipalities, hospitality companies and a major university have already expressed "tremendous interest" in working with the company to recycle their mattresses, he said. The Wisconsin DNR has also lent its support.

"We think it's wonderful, absolutely wonderful," Moore said. "Wisconsin's got a great recycling ethic, and in addition to that, mattress recycling is one of the more expensive items for community recycling programs, and they're also a real nuisance to handle at landfills, and handling mattresses has been sort of a constant burden and worry for local governments, so we're absolutely delighted that this individual has taken the initiative to set up a mattress recycling facility in Wisconsin."

Mudler has his eye on becoming one of the largest mattress recyclers in the nation, and in five years aims to be processing 50,000 to 75,000 pieces per year.

Each mattress at Midwest Mattress Recovery will be disassembled manually to recover recyclable metal, polyurethane foam, wood and cotton batting. The first three materials will be sent to separate Wisconsin processors; Mudler is still looking for a home for cotton batting.

Midwest Mattress Recovery will be able to provide pickup service where financially worthwhile and will accept mattresses from in-state and out-of-state sources, Mudler said. The company is also testing a program to recycle upholstered furniture, although the pilot program is not open to the public.

The company accepted more than 270 pieces for recycling before its official open date March 4.

"It's really been a lot of fun getting going; this is like a big puzzle and I've just been trying to put together the pieces," Mudler said. "Everything from finding the right space to getting insurance to employing labor; it's been a tremendous learning experience for me and I've really had a lot of fun with it."


Comments

Midwest Mattress Recovery becomes first mattress recycler in Wisconsin

By Kerri Jansen
WASTE & RECYCLING NEWS

Published: March 13, 2013 11:17 am ET
Updated: March 13, 2013 11:19 am ET

Post Your Comments


Back to story


More stories

Image

Recycling group releases shrink sleeve label guidelines

September 26, 2014 4:02 pm ET

A post-consumer plastics recycling trade group is out with a set of recommendations to help guide the packaging industry on the use of shrink sleeve...    More

Image

Chemical regulation policy update likely to remain in limbo

September 26, 2014 1:13 pm ET

Efforts to broker a deal on national chemical regulation policy appear to have fallen apart in the waning days of the 113th Congress, leaving...    More

Image

Cascade founder believes business can be a place for real change

September 25, 2014 11:06 am ET

Companies can make a difference in a person's life, and Fred Keller, founder of Cascade Engineering Inc., believes it is important that they do.    More

Image

Recycling rates continuing to climb for EPS used in transport packaging

September 25, 2014 11:28 am ET

Recycling of the expanded polystyrene used in transport packaging continues to rise, extending what has now been a years-long push even higher.    More

Image

PRE taking the first steps to increase PET tray recycling

September 25, 2014 10:33 am ET

A set of new guidelines covering design-for-recycling for PET trays has been published by Plastics Recyclers Europe (PRE), the Brussels-based trade bo...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events