Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

RedCup-martini-jpg

Red Cup Living LLC's reusable martini glasses

Related to this story

Topics Consumer Products, Thermoforming

CHICAGO — That iconic red cup is getting a makeover courtesy of a new Arizona company that's using the cup's design cues in a new line of reusable glasses.

Red Cup Living LLC has created a series of dishwasher-safe ABS glasses not only in the traditional style first created by Solo Cup Co., but also translated into wine glasses, martini glasses, shot glasses, a cup-shaped bottle opener and even glasses for margaritas.

Check out this PN video with Red Cup founder Michael Romley showing samples of his firm's products.

"We had just moved to a new house, and we started having neighborhood parties to get to know people," said Red Cup founder Michael Romley during a March 3 interview at the International Home + Housewares Show in Chicago.

After a few weeks, they took a look at the number of disposable red plastic cups they were going through, and wondered if there was a reusable version on the market. He and wife and partner Kathryn Romley wanted to stick with the red-cup look, reasoning that the design has come to have a certain connotation with parties and relaxation for the American consumer.

At the same time, Romley — who had previously run two other housewares firms — was looking for another business opportunity. Once the couple discovered there were no reusable red cups on the market, the potential market seemed clear.

Eight months after entering the market, the company is gaining traction and Red Cup Living is looking at how it can bring production to the U.S. after launching molding in Taiwan.

"As a startup, we didn't know what to expect, and there's a lot of money to lay out for molds and press time," he said. Initial response, though, has been positive. "We've presold more [cups] than we expected to sell for the full production launch."

Before starting the business, Romley said they carefully investigated any legal issues related to piggybacking on the Solo Cup design, finally deciding that the form had become generic enough — used by other thermoforming companies — that the business was safe. In addition, during the ramp-up to start the business, Solo changed its design to a rectangular base, while Red Cup Living based its design on the original shape.

"We did a tremendous amount of research on this first," he said.

Solo sold to competitor Dart Container Corp. of Mason, Mich., in 2012, just as Red Cup Living was preparing to launch sales in June. Having country music's Toby Keith release a song praising the cup at the same time didn't hurt, Romley said.

Red Cup Living already has competitors who tapped into the same design. Trudeau Corp. of Woodridge, Ill., launched its "Red Party Cup" collection — molded in St. Charles, Ill. — just two months after Red Cup Living. And while it is not a commercial product, Eastman Chemical Co. of Kingsport, Tenn., developed a Tritan-based version on the familiar design to promote itself at the housewares show.

Red Living came to the market with a greater variety of glasses, though. The red-cup-inspired wine glass is the firm's second-best seller, Romley said. The company had 2,000 sales locations before IHHS.

"These are just really resonating with people," he said, as two housewares retailers posed for a photo holding margarita versions of the cup at Red Cup Living's booth. "It's not just about a cup, it's a lifestyle."


Comments

Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

Post Your Comments


Back to story


More stories

Image

Lund adds to aftermarket auto products portfolio with buy of Bushwacker

January 29, 2015 2:49 pm ET

Lund International Inc. has expanded its portfolio of plastic aftermarket vehicle accessories by acquiring Bushwacker Inc.    More

Image

Falcon Plastics expands in South Dakota

January 29, 2015 11:45 am ET

Falcon Plastics Inc. is putting the final touches on a 60,000 square foot addition that will nearly double the size of its Brookings, S.D.,...    More

Image

Plastics News Now: Losing weight with style, plastics in the Dragons' Den

January 29, 2015 6:00 am ET

A 19-year-old entrepreneur brings business to a U.K. injection molder after winning support on TV's Dragons' Den, auto suppliers combine...    More

Image

Plastics help Volt hit new target

January 28, 2015 1:54 pm ET

The 2016 Volt, unveiled at the North American International Auto Show in Detroit in January, features a sportier exterior design — GM calls it...    More

Image

It's becoming a seller's market for plastics firms

January 27, 2015 11:37 am ET

The pace of plastics mergers and acquisitions activity slowed a bit in the second half of 2014 — but market watchers have high expectations for ...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events