Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

RedCup-martini-jpg

Red Cup Living LLC's reusable martini glasses

Related to this story

Topics Consumer Products, Thermoforming

CHICAGO — That iconic red cup is getting a makeover courtesy of a new Arizona company that's using the cup's design cues in a new line of reusable glasses.

Red Cup Living LLC has created a series of dishwasher-safe ABS glasses not only in the traditional style first created by Solo Cup Co., but also translated into wine glasses, martini glasses, shot glasses, a cup-shaped bottle opener and even glasses for margaritas.

Check out this PN video with Red Cup founder Michael Romley showing samples of his firm's products.

"We had just moved to a new house, and we started having neighborhood parties to get to know people," said Red Cup founder Michael Romley during a March 3 interview at the International Home + Housewares Show in Chicago.

After a few weeks, they took a look at the number of disposable red plastic cups they were going through, and wondered if there was a reusable version on the market. He and wife and partner Kathryn Romley wanted to stick with the red-cup look, reasoning that the design has come to have a certain connotation with parties and relaxation for the American consumer.

At the same time, Romley — who had previously run two other housewares firms — was looking for another business opportunity. Once the couple discovered there were no reusable red cups on the market, the potential market seemed clear.

Eight months after entering the market, the company is gaining traction and Red Cup Living is looking at how it can bring production to the U.S. after launching molding in Taiwan.

"As a startup, we didn't know what to expect, and there's a lot of money to lay out for molds and press time," he said. Initial response, though, has been positive. "We've presold more [cups] than we expected to sell for the full production launch."

Before starting the business, Romley said they carefully investigated any legal issues related to piggybacking on the Solo Cup design, finally deciding that the form had become generic enough — used by other thermoforming companies — that the business was safe. In addition, during the ramp-up to start the business, Solo changed its design to a rectangular base, while Red Cup Living based its design on the original shape.

"We did a tremendous amount of research on this first," he said.

Solo sold to competitor Dart Container Corp. of Mason, Mich., in 2012, just as Red Cup Living was preparing to launch sales in June. Having country music's Toby Keith release a song praising the cup at the same time didn't hurt, Romley said.

Red Cup Living already has competitors who tapped into the same design. Trudeau Corp. of Woodridge, Ill., launched its "Red Party Cup" collection — molded in St. Charles, Ill. — just two months after Red Cup Living. And while it is not a commercial product, Eastman Chemical Co. of Kingsport, Tenn., developed a Tritan-based version on the familiar design to promote itself at the housewares show.

Red Living came to the market with a greater variety of glasses, though. The red-cup-inspired wine glass is the firm's second-best seller, Romley said. The company had 2,000 sales locations before IHHS.

"These are just really resonating with people," he said, as two housewares retailers posed for a photo holding margarita versions of the cup at Red Cup Living's booth. "It's not just about a cup, it's a lifestyle."


Comments

Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

Post Your Comments


Back to story


More stories

Image

Design, materials, engineering finding a faster way forward

August 27, 2014 1:50 pm ET

Engineering and design specialists at Altair Thinklabs and Eastman Chemical Co. have developed prototypes that would not just help Paralympics...    More

Image

Design Stories: Young designers showing the way in adaptive design

August 27, 2014 12:12 pm ET

Amanda Bolton, then 19, decided to change her major at the University of Cincinnati from fine arts to industrial design, creating products for people ...    More

Image

Canadian thermoformer ICI gets new financial backing

August 26, 2014 3:11 pm ET

Innovative Composites International Inc. (ICI) will get a $1.5 million infusion in the form of a loan and equity funding to cover a corporate...    More

Image

New executives look to increase business at Little Tikes, Step2

August 26, 2014 12:46 pm ET

Northeastern Ohio toy rotational molders Step2 Co. LLC and Little Tikes Co. both have new top executives: Thomas Doherty at Step2 and Bill Cofield at ...    More

Image

Material Insights: Firm investing in new polymer technology

August 25, 2014 1:05 pm ET

Investment group wants to make Northeast Ohio the Silicon Valley of the plastics industry; shale gas revolution is headed overseas; and recycled HDPE ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events