Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

Related to this story

Topics Consumer Products, Thermoforming

CHICAGO — That iconic red cup is getting a makeover courtesy of a new Arizona company that's using the cup's design cues in a new line of reusable glasses.

Red Cup Living LLC has created a series of dishwasher-safe ABS glasses not only in the traditional style first created by Solo Cup Co., but also translated into wine glasses, martini glasses, shot glasses, a cup-shaped bottle opener and even glasses for margaritas.

Check out this PN video with Red Cup founder Michael Romley showing samples of his firm's products.

"We had just moved to a new house, and we started having neighborhood parties to get to know people," said Red Cup founder Michael Romley during a March 3 interview at the International Home + Housewares Show in Chicago.

After a few weeks, they took a look at the number of disposable red plastic cups they were going through, and wondered if there was a reusable version on the market. He and wife and partner Kathryn Romley wanted to stick with the red-cup look, reasoning that the design has come to have a certain connotation with parties and relaxation for the American consumer.

At the same time, Romley — who had previously run two other housewares firms — was looking for another business opportunity. Once the couple discovered there were no reusable red cups on the market, the potential market seemed clear.

Eight months after entering the market, the company is gaining traction and Red Cup Living is looking at how it can bring production to the U.S. after launching molding in Taiwan.

"As a startup, we didn't know what to expect, and there's a lot of money to lay out for molds and press time," he said. Initial response, though, has been positive. "We've presold more [cups] than we expected to sell for the full production launch."

Before starting the business, Romley said they carefully investigated any legal issues related to piggybacking on the Solo Cup design, finally deciding that the form had become generic enough — used by other thermoforming companies — that the business was safe. In addition, during the ramp-up to start the business, Solo changed its design to a rectangular base, while Red Cup Living based its design on the original shape.

"We did a tremendous amount of research on this first," he said.

Solo sold to competitor Dart Container Corp. of Mason, Mich., in 2012, just as Red Cup Living was preparing to launch sales in June. Having country music's Toby Keith release a song praising the cup at the same time didn't hurt, Romley said.

Red Cup Living already has competitors who tapped into the same design. Trudeau Corp. of Woodridge, Ill., launched its "Red Party Cup" collection — molded in St. Charles, Ill. — just two months after Red Cup Living. And while it is not a commercial product, Eastman Chemical Co. of Kingsport, Tenn., developed a Tritan-based version on the familiar design to promote itself at the housewares show.

Red Living came to the market with a greater variety of glasses, though. The red-cup-inspired wine glass is the firm's second-best seller, Romley said. The company had 2,000 sales locations before IHHS.

"These are just really resonating with people," he said, as two housewares retailers posed for a photo holding margarita versions of the cup at Red Cup Living's booth. "It's not just about a cup, it's a lifestyle."


Comments

Red Cup creates series of reusable glasses

By Rhoda Miel
News Editor

Published: March 14, 2013 4:37 pm ET
Updated: March 14, 2013 4:51 pm ET

Post Your Comments


Back to story


More stories

Image

Producers urge booming Brazilian housing market to use EPS

April 18, 2014 1:08 pm ET

Leaders in Brazil's plastics industry are asking lawmakers to mandate the use of expandable polystyrene (the raw material for expanded EPS) in new...    More

Image

'Thermoforming has nearly limitless possibilities'

April 18, 2014 12:54 pm ET

Julie McAlindon of PolyOne Corp. speaks about the future of thermoforming and the integration of Spartech Corp.    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to...    More

Image

Navigating the rough seas of selling your company

April 17, 2014 2:47 pm ET

For family owned plastics firms who survived the Great Recession, many wonder: Is it time to sell, retire and sip cocktails on the beach? Or, maybe...    More

Image

Envision begins production of compostable, bio-based tablecloths

April 17, 2014 12:17 pm ET

A line of eco-friendly party supplies and tableware now will include compostable tablecloths made by a Wichita, Kan.-based nonprofit that provides wor...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events