Arburg looks to packaging and Far East for growth

By James Snodgrass
EUROPEAN PLASTICS NEWS

Published: March 14, 2013 2:43 pm ET
Updated: March 14, 2013 2:52 pm ET

Image By: Arburg Michael Hehl

Related to this story

Topics Sustainability, Machinery
Companies & Associations Arburg GmbH + Co. KG

LOSSBURG, GERMANY — Arburg GmbH + Co. KG, the Lossburg-based injection molding machine manufacturer, expects to post consolidated 2012 sales of 488 million euros ($633 million) — an increase of around 4 percent from 2011.

Speaking at a news conference on March 13, held during Arburg's Technology Days, managing partner Michael Hehl said anticipated future growth will be in Asia and South America, with most growth coming from the Far East.

Asked if the economic crisis in southern Europe would affect Arburg's business, Helmut Heinson managing director of sales, contended: "Well of course, but not to the extent you might expect. In Spain we are keeping sales on previous years. France is fine, the U.K. is fine."

Boll identified the United States as Arburg's biggest foreign market. But he also considered the Far East as having the best potential for growth despite Arburg's machinery being relatively expensive compared with locally-sourced machinery.

In the company's Technology Center, Arburg showed more than 40 Allrounder exhibits to an estimated 5.000 guests from all over the world. Highlights of the showcase included an Allrounder 470 C Golden Edition molding cups from a 100 percent bio-derived PET. Technical director Herbert Kraibühler, said that with the bio PET, "we are getting closer to traditional materials, except with a lower melt temperature."

Also on a bio-materials theme, an Allrounder 370S was making boxes using PLA with a timber fiber content of nearly 60 percent. Kraibühler invited visitors to sniff the boxes — which smelled distinctively wood-like — but noted that there was further development to come as the boxes were too brittle for practical use.

Packaging has been identified as a growth market for the company, which is keen to emphasize that it does not just make small machines. To demonstrate this, it showed off an Allrounder 570 H producing IML food containers in 4.5 seconds, with a material throughput of over 22 kilograms per hour. To prove that the hybrid machine was precise in its movements, Kraibühler pointed to the floor and said: "Look! No labels have dropped on the floor!"

Arburg also used itsTechnology Days to host their sixth annual Energy Efficiency Award. The 2013 prize was given to AMK, the Kirchheim, Germany-based maker of drive and control technology. Joining previous winners including Tyco and Lego, AMK was given the prize for its use of energy-optimized Allrounders in its own injection molding plant, which is used to make components for its drive technology which, in turn, is used in Arburg's electric-powered machines.


Comments

Arburg looks to packaging and Far East for growth

By James Snodgrass
EUROPEAN PLASTICS NEWS

Published: March 14, 2013 2:43 pm ET
Updated: March 14, 2013 2:52 pm ET

Post Your Comments


Back to story


More stories

Negri Bossi's new owners may 'bring significant manufacturing' to US

April 16, 2014 1:09 pm ET

Italian plastics equipment major Negri Bossi may “bring significant manufacturing of injection molding machines back to the United...    More

Image

Polyair rebuilds from Sandy with help from Process Control

April 16, 2014 4:11 pm ET

Hurricane Sandy gutted Polyair Inter Pack Inc.'s Carlstadt, N.J., plant more than a year ago, and Brian Clawson won't soon forget the devastation.    More

With European Parliament vote looming, official urges bag restriction

April 16, 2014 9:56 am ET

Janez Potocnik, Europe's commissioner for the environment, told the European Parliament April 15 that plastic shopping bags are a “highly...    More

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Image

SodaStream turns to PET for its new pre-measured flavor 'Caps'

April 15, 2014 1:40 pm ET

SodaStream International Ltd., maker of home beverage carbonation systems, is using plastic to bring more flexibility to its consumers.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events