Euromap revises methods for comparing energy efficiency of injection presses

EUROPEAN PLASTICS NEWS

Published: March 20, 2013 8:48 am ET
Updated: March 20, 2013 8:54 am ET

Related to this story

Topics Sustainability Injection Molding Machinery
Companies & Associations

Euromap, the European association of plastics and rubber machinery manufacturers, has revised its Euromap 60 recommendation to enable comparison of the energy efficiency of injection molding machines.

The first part of the revision covers machine-related energy consumption, which follows a two-year project to establish uniform parameters for measurement. It introduces an energy efficiency classification based on two test cycles that take the particular characteristics of fast running machinery and very small machines into account.

There are 10 energy efficiency classes, which will allow injection molders to compare machinery from different suppliers. Harald Weber, secretary of Euromap, said machinery manufacturers are able to assign a class to a machine in its technical documentation.

The second part of the Euromap 60 revision enables molders to determine the energy consumption of a machine in the context of its specific molded products. Euromap said: "The key parameter here is the specific energy consumption in kilowatt-hours per kilogram of plastic processed."

It has provided a method of measurement with defined terms of reference, together with a model for documenting the results. This will allow a molder, when buying a new machine, to tailor a calculation of energy consumption to its own molded products.

Weber said Euromap expert groups are now working on recommendations for measuring the energy consumption of extrusion, blow-molding and thermoforming machines. This work will take some months yet, due to the differences in energy consumption profiles of the various processes.


Comments

Euromap revises methods for comparing energy efficiency of injection presses

EUROPEAN PLASTICS NEWS

Published: March 20, 2013 8:48 am ET
Updated: March 20, 2013 8:54 am ET

Post Your Comments


Back to story


More stories

Image

Uponor sells plastic pipe machinery business to focus on core units

March 30, 2015 2:13 pm ET

Uponor Corp., the Finland-based maker of plastic pipe systems for plumbing, underfloor heating and cooling and infrastructure, announced March 30...    More

Image

Haitian aims to revolutionize US molders' purchase process

March 27, 2015 9:00 am ET

Haitian International Holdings Ltd. (Booth W3683) is introducing new machines to North American molders with four presses on display at its large...    More

Image

Building a sports superstar

March 27, 2015 9:00 am ET

Assembling the lower portion of an Oyo Sportstoys Inc. mini figure 30 times a minute, an automated cell built by Devlinks Ltd. (Booth S26149) is...    More

Itech South buys 7 Negri Bossi presses

March 26, 2015 4:51 pm ET

Itech South, part of Injection Technology Corp., bought seven Negri Bossi injection molding presses, equipped with Sytrama robots, at NPE 2015.    More

Image

Uniloy Milacron, 20/20 ink massive structural foam press sale at NPE

March 26, 2015 4:19 pm ET

20/20 Custom Molded Plastics Ltd. bought four Uniloy Milacron structural foam machines, in a deal signed March 25 at NPE 2015.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events