Study says New York PS ban would cost $100 million annually

By Gayle S. Putrich
Staff Reporter

Published: March 27, 2013 4:22 pm ET
Updated: March 27, 2013 4:50 pm ET

Related to this story

Topics Packaging, Recycling, Government & Legislation, Food packaging, Food service
Companies & Associations American Chemistry Council

WASHINGTON — New York City's proposed ban on polystyrene foam packaging could cost nearly $100 million annually and hurt businesses across the state, according to a new study.

The study, conducted by research firm MB Public Affairs on behalf of the American Chemistry Council, shows that such a ban could nearly double food service packaging costs — while doing little to actually reduce waste.

"Total costs to replace plastic foam foodservice and drink containers and trays with the lowest-cost alternative are estimated at $91.3 million [per year.] This level translates into an effective minimum average cost increase of 94 percent," the study says.

"In other words, for every $1.00 now spent on plastic foam foodservice and drink containers, NYC consumers and businesses will have to spend at least $1.94 on the alternative replacements, effectively doubling the cost to businesses."

Mayor Michael Bloomberg called PS foam "something that we know is environmentally destructive, that is costing taxpayers' money, and that is easily replaceable and is something we can do without," in his state of the city address earlier this month. He and Speaker of the City Council Christine Quinn plan to adopt a law banning PS food packaging from stores and restaurants.

So far, no such measure has been introduced.

The city itself is one of the biggest purchasers of PS food service containers, spending nearly $12 million a year on items such as cups and trays. Switching to the lowest cost paper alternatives would cost the city an additional $11 million a year, including $8 million for the Education Department alone, according to the study.

Restaurants would see an estimated $57 million increase in costs, the report says.

The study — and the plastics industry — are also trying to clear up common misconceptions about PS and its paper alternatives.

The City of New York Department of Sanitation's Web site specifically mentions paper coffee cups and other paper food service items cannot be recycled in the city's current waste management system. And with common complaints that paper cups do not insulate as well as EPS, consumers are prone to "double cupping" or using an additional cardboard sleeve to keep contents warm, leading to increased unrecyclable waste, which would raise the city's costs beyond the beyond the $91 million per year estimated in this study.

Moreover, despite Bloomberg's speech, PS is being successfully recycled in 65 cities around the United States, including Los Angeles, says Keith Christman, managing director of plastic markets at ACC.

"I know there are recyclers in the area," Christman said. "We'd like to work with the city to develop foam recycling in New York City."

It is a common assumption that paper alternatives to foam are recyclable simply because they are made of paper, Christman said.

"In many cases, other cities have proposed bans but ultimately rejected them as they learned more of the facts," he said. "I think the bottom line is that there are much better ways to go than a ban."

Just a quick trip down I-95 from New York, in New Brunswick, N.J., Gary M. Frederick and his business partner Daryl Little of Princeton Moulding Group LLC are wishing New Yorkers would use more EPS, not less.

Princeton Moulding, part of parent company Aflex Extrusion Technologies Inc., manufactures decorative picture frame and architectural moldings from recycled PS. The company designs, develops and manufactures its own tooling for custom work, competing primarily with companies in China and South Korea for work as well as raw materials, Frederick said.

"Believe it or not, when we first started using the recycled stuff, we couldn't find it," he said. "We started off having to import it."

In the 10 years since Princeton Moulding moved from making cellular foam molding with a different method, Frederick has built up a reliable recycled PS supplier base.

In August 2012, Princeton Moulding moved its 30 employees from a 30,000 square foot facility to one with 60,000 square feet and its own recycling line and an EPS collection point.

"Now, anyone could literally just make a drop off right at the plant," he said. "Most of what we get right now is from furniture and appliance packaging but we see some food services trays, cups, whatever. I've got a pile of Dunkin Donuts cups on my desk right now I'm going to throw on the line later."

But it is the availability of PS that is the primary factor holding back further expansion at Princeton Moulding, Frederick said. While an EPS ban in New York City would not hold up his collection of appliance packaging, it would permanently cut off a potential supply from ever being developed and reinforce the notion among consumers that foam is not recyclable.

"Even in my own neighborhood, and I live in the suburbs, it's not on the list to be collected at the curb with the other recyclables. So people think you can't recycle it at all," he said. "It's a shame that it's 100 percent recyclable but most people don't know that."


Comments

Study says New York PS ban would cost $100 million annually

By Gayle S. Putrich
Staff Reporter

Published: March 27, 2013 4:22 pm ET
Updated: March 27, 2013 4:50 pm ET

Post Your Comments


Back to story


More stories

Image

PET film maker Evertis expanding production in Mexico, Brazil, Portugal

November 20, 2014 2:52 pm ET

Evertis, a PET film maker, is expanding production at plants in Mexico, Brazil and Portugal, the company said.    More

Image

Coveris changes culture, eyes IPO

November 20, 2014 1:40 pm ET

CEO Gary Masse has a simple message, and some new math, for everyone at Coveris Holdings Corp. Get on board or get out of the way.    More

Image

NS Farrington 'on track' to recycle 1 ton of PE per month

November 20, 2014 10:23 am ET

A polyethylene recycling program created by N.S. Farrington & Co. has passed the 60,000 pound mark.    More

Russian industrial film maker converting to food packaging film

November 19, 2014 9:46 am ET

Tasma, an 80-year-old Russian producer of technical industrial films which supported the USSR war effort during World War II, has assumed a new role...    More

Image

Film manufacturers pushing, again, for non-resin price increases

November 17, 2014 2:57 pm ET

UPDATED — For the third time this year, major polyethylene film makers are seeking non-resin price increases for their products.For the third ti...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events