Haitian Mars II now available in US and Canada

By Bill Bregar
Senior Staff Reporter

Published: March 27, 2013 2:20 pm ET
Updated: March 27, 2013 2:21 pm ET

Related to this story

Topics Product News

Absolute Haitian Corp. of Worcester, Mass., offers the Mars II for molders in the United States and Canada, available for delivery in the first quarter of 2013.

Available in clamping forces from 67-4.400 tons, the servo-hydraulic Mars II marks the first major design upgrade for the Mars press, which China-based Ningbo Haitian International Holdings Ltd. rolled out last fall, at the Fakuma show in Germany. Haitian has sold 85,000 Mars presses worldwide.

Mars II presses optimize the kinetics of the toggle system, reducing the dry cycle time by up to 25 percent and offering a more precise and dynamic clamp design. Mars II machines also feature faster plasticizing and recovery rates, the company said.

“The redesign is based on customer feedback Haitian has received and so the results are truly customer-driven,” said Glenn Frohring, president of Absolute Haitian. “The response Haitian received during the product premier at the Fakuma exhibition late last year was very promising.”

In other news, Absolute Haitian molded a medical part on a 101-ton all-electric Venus molding machine at the Plastec West trade show in Anaheim, Calif. The polypropylene part was a component used in an oral appliance for sleep apnea patients.

Tel. 508-459-5372, www.absolutehaitian.com.


Comments

Haitian Mars II now available in US and Canada

By Bill Bregar
Senior Staff Reporter

Published: March 27, 2013 2:20 pm ET
Updated: March 27, 2013 2:21 pm ET

Post Your Comments


Back to story


More stories

Image

PC used in academy roof retrofit

January 28, 2015 8:55 am ET

Polycarbonate sheet meets the demands of a “living roof” in a retrofit at the California Academy of Sciences in San Francisco.    More

Lehvoss nylons stand up to auto uses

January 28, 2015 8:49 am ET

Lehvoss North America has upped performance of polymers in automotive gears. Plastics replace metal in many auto gears because of design freedom,...    More

Molder develops multi-shot process for liquid silicone elastomers

January 28, 2015 8:42 am ET

A liquid silicone injection molder has developed a multi-shot process in conjunction with Dow Corning's QP1 silicone elastomers.    More

Struktol additive to improve properties of recycled resins

January 28, 2015 8:44 am ET

Struktol Co. of America has extended its lineup of additives to improve processing and properties of recycled resins and will feature the technology...    More

Image

KraussMaffei to feature multicomponent molding at NPE

January 28, 2015 10:34 am ET

KraussMaffei Corp. will show multicomponent injection molding, the FiberForm and MuCell processes, and a new Adaptive Process Control system, at NPE 2...    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events