Kneiss: Plenty of opportunity for growth in recycling

By Jim Johnson
WASTE & RECYCLING NEWS

Published: March 28, 2013 1:36 pm ET
Updated: March 28, 2013 1:39 pm ET

Related to this story

Topics Sustainability, Recycling

CHICAGO — Sharon H. Kneiss is approaching her first anniversary on the job as leader of the Environmental Industry Associations.

The president and CEO of the trade group, which includes both the National Solid Wastes Management Association and the Waste Equipment Technology Association, was recently the keynote speaker at the Residential Recycling Conference in Chicago. Kneiss recently took part in a question-and-answer session about the role private solid waste management companies play in recycling.

Some comments have been edited due to space limitations.

Q: One word: Recycling. What does that mean to you?

A: I'm proud to be representing the industry that's leading the way in providing and promoting recycling. We're building large facilities with state-of-the-art technology and high efficiencies. The industry has 80 percent of capacity for recycling. Primarily [recycling] is a partnership among our industry, municipalities and the public. Tremendous benefits, it includes conservation, energy savings and other environmental benefits; It's also expanding technology. It's extracting value from materials and expanding markets.

Q: What is your broad assessment of where the nation is at currently in terms of recycling?

A: We've come a long way. Since the 1960s, rates have increased more than five-fold. Recycling rates continue to increase, although at a lower rate of increase.

What's most amazing is the technology improvement. Tremendous improvement in technology along with education and better access to recycling, including curbside recycling. And these have produced significant increases and efficiencies in the process. And I think we're going to see more efficiencies. We've expanded markets for recycled material, and we see opportunities for further expansion.

There is an evolution, actually, of the mix that's in the bin. And some of this is due to improvements in the system, some of it's due to expanding markets and some of it is actually due to the actions of retailers to change packaging. So were seeing more plastics than glass. We're seeing less paper and, of course, some of that is due to the electronic age.

But it is a changing situation. And we're seeing major corporations focusing their efforts on recycling and that has an impact on the market.

Q: What are the challenges you see moving forward in advancing higher levels of recycling?

A: I see some of the challenges as well as … opportunities. The recycling of organics, that's challenging. It's a big opportunity as well.

And of course, the issues, there are the economics. And some physical issues like odor control, moisture, how do you collect it effectively, things like that. But that's the next big frontier for recycling.

Other challenges are fluctuations in the commodity markets and market demand. And, of course, we saw that significantly last year.

The regulatory climate, whether it promotes private industry efforts in recycling or it serves as a detriment. And then education, the importance of education in recycling.

Q: And what are the opportunities? What does the future hold?

A: Sixty-three percent of households have access to curbside recycling. … I think there's the possibility of expansion. … Continued technology improvements. The improvements to technology are amazing in optical scanning, sorting, and as a result, line speeds have significantly increased with greater accuracy.

Improving the economics in organics processing and then energy generation. Especially some of the larger companies are looking at all kinds of exciting opportunities in energy generation.

And, of course, a lot of private haulers are moving their fleets to CNG-powered fleets, which is pretty exciting.

Q: How has the private sector helped push recycling volumes higher over time?

A: Private industry is responsible for 80 percent of the recycling capacity in the United States. They are building highly efficient facilities and very large facilities so they can serve the needs regionally.

They also contribute to the education of recycling [and] collection technology development. When I entered this industry, I was fascinated by the rapid pace of improvements in technology on the recycling side.The technology is changing and improving rapidly.

Also the bottom line is easier access for collection, and one of the biggest contributors to that was single-stream recycling.


Comments

Kneiss: Plenty of opportunity for growth in recycling

By Jim Johnson
WASTE & RECYCLING NEWS

Published: March 28, 2013 1:36 pm ET
Updated: March 28, 2013 1:39 pm ET

Post Your Comments


Back to story


More stories

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Image

SodaStream turns to PET for its new pre-measured flavor 'Caps'

April 15, 2014 1:40 pm ET

SodaStream International Ltd., maker of home beverage carbonation systems, is using plastic to bring more flexibility to its consumers.    More

Plastics recycling rates in Michigan will go up, if new initiative works

April 14, 2014 4:15 pm ET

Clean Tech, a unit of Plastipak Packaging Inc., expects to recycle about 6 billion plastic bottles this year and has an eye on 10 billion plastic...    More

CertainTeed and Saint-Gobain go green with new North American HQ

April 14, 2014 1:24 pm ET

Renovation work is ready to begin on a LEED-certified headquarters for building materials maker Saint-Gobain and its subsidiary, CertainTeed Corp.,...    More

Pepsi adds recycling bins in Oklahoma

April 14, 2014 12:45 pm ET

PepsiCo Inc. is beefing up recycling efforts in Tulsa, Okla., through the placement of more than 120 recycling bins at nearly 30 locations.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events