Global polyethylene demand poised for growth

By Frank Esposito
Senior Staff Reporter

Published: March 29, 2013 2:11 pm ET
Updated: March 29, 2013 5:40 pm ET

Image By: IHS Chemical Nick Vafiadis

Related to this story

Topics Materials, Materials Suppliers

HOUSTON — Global polyethylene demand growth is expected to ramp up fairly soon, averaging almost 5 percent annually between 2012 and 2017.

That's the outlook of market veteran Nick Vafiadis, who spoke at the IHS World Petrochemical Conference, held March 20-21 in Houston. Vafiadis serves as senior director of global polyolefins and plastics for Houston-based IHS Chemical.

Annual growth of 4.6 percent in that five-year span will have global demand sitting at just over 216 billion pounds by 2017. "That growth exceeds the current level of North American demand," Vafiadis said. "That's like growing another North America in the next five years. The market has mass and momentum."

In North America, that momentum is coming from newfound supplies of natural gas, mainly from shale rock formations. These new supplies can be used to make ethane and then ethylene feedstock. The discoveries have led to a wave of expansion announcements, including around 11 billion pounds of new PE capacity that's set to hit North America toward the end of that five-year forecast period.

Vafiadis pointed out that those projections don't even include new capacity from Ineos Group and Dow Chemical Co. that just were announced in late March. "Strong margins are leading to capacity increases," he said.

Much of the new North American PE capacity will be targeted at export markets, which are expected to grow by 5 percent over the forecast period. Domestic demand also is expected to improve toward the end of that period.

One positive impact of the new North American PE capacity should be a resurgence for the region's PE processors, especially makers of film and bags, Vafiadis explained.

"As North America gets new production capacity, there will be an increase in processor capacity in the U.S.," he said. "The domestic market will become more competitive. Some big U.S. processors will expand to take advantage of the new [PE] capacity in North America.

"We're starting to hear about repatriating processor capacity. We're going to see increased exports of [PE] finished goods."

On the pricing front, PE prices in North America and elsewhere are expected to move to global parity, Vafiadis said, because of new capacity and increased competition. "New capacity is fighting for limited demand growth," he said.

There could be some challenges to North America's PE growth spurt. "Everyone can't build," Vafiadis said. "That would strain resources too much. But the early bird gets the worm. You need your capacity to start up first to reap the greatest reward."

North American PE makers also need "a new channel into the export market to move their product," he said. In addition, PE processors need to market their finished goods into international markets.

Globally, PE capacity additions in that span are expected to exceed 57 billion pounds. But some regions will benefit more than others. Growth in the Middle East, Vafiadis said, will continue to move forward as countries there invest in infrastructure and a growing population drives consumer markets.

Europe's PE market, however, is expected to struggle, he added, with demand down and imports on the rise. More than 2 billion pounds — about 7.5 percent of Europe's PE capacity — is expected to be shut down by 2017, Vafiadis said.

In China, PE capacity and demand are headed up, but operating rates are expected to remain low. The challenge for that country's PE market, Vafiadis said, is to rationalize higher-cost plants and to move away from commodity products.

No new PE capacity is slated for Latin America through 2017, which will improve that region's operating rates. Globally, new PE capacity should lower global operating rates almost 1 percent, from 84.2 percent in 2007-12 to 83.4 percent in 2012-17, according to Vafiadis. North America's PE operating rates will be the highest in the world in that 2012-17 period, ranging from 85-90 percent.

"U.S. producers [from 2012-17] will have the luxury of being able to export and get healthy returns to every region in world," he said. "That will keep operating rates high.

"Post-2015, U.S. producers will have to rely on export sales outside of South America. China's influence will leverage down export prices and the domestic price as we move to global price parity."

When the new PE capacity arrives in North America, some producers "will put an emphasis on domestic supply," Vafiadis added. "So we could see North American prices drop lower for a short period until global operating rates improve."


Comments

Global polyethylene demand poised for growth

By Frank Esposito
Senior Staff Reporter

Published: March 29, 2013 2:11 pm ET
Updated: March 29, 2013 5:40 pm ET

Post Your Comments


Back to story


More stories

Image

DSM planning North American nylon plant

July 22, 2014 11:41 am ET

Materials firm Royal DSM NV plans to build a new nylon resin plant in North America, but no decision has been made on the plant's exact location.    More

China launches investments in Belarus

July 21, 2014 10:10 am ET

China is preparing to invest in a major bottle grade PET production project planned by the Belarus PET and polyester fibers producer...    More

Image

Polynt, CCP create composite resins giant

July 18, 2014 10:13 am ET

France's Total SA has agreed to sell CCP Composites to Polynt Group SpA, based in Italy, for an undisclosed price.    More

Image

PET prices climb 2 cents

July 17, 2014 2:22 pm ET

After holding their ground in May, North American PET prices rebounded to show an average increase of 2 cents per pound in June.    More

Image

PolyOne closing 2 plants in Brazil

July 16, 2014 12:40 pm ET

Materials maker PolyOne Corp. is closing two of its four Brazilian plants in order to streamline operations and improve its financial performance in t...    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events