HEADS UP: 3-D printing provides custom-made craniums

By Gayle S. Putrich
Staff Reporter

Published: April 2, 2013 1:18 pm ET
Updated: April 2, 2013 1:31 pm ET

Image By: Oxford Performance Materials OPM's custom-made, patient-specific OsteoFab cranial implant device

Related to this story

Topics Medical, Materials Suppliers

WASHINGTON — If, after a nasty accident, you have to have a plate implanted in your skull, wouldn't you prefer to have one that is custom made?

Thanks to polyetherketoneketone polymers, 3-D printing technology and the Food and Drug Administration's approval of the OsteoFab patient-specific cranial device, that is entirely possible.

Oxford Performance Materials, in South Windsor, Conn., traditionally sold PEKK as a raw material or in a semi-finished form, but the company began developing additive manufacturing technologies in 2006 after reading several articles by surgeons saying, "If only we could … ," according to OPM President and CEO Scott DeFelice.

OPM started by looking at the powder-based 3-D printing process and, after six years and "many millions" in internal investment, came up with a cranial implant manufacturing process for custom building a product to fit each patient.

After a craniotomy, CT scans from the hospital are sent to Connecticut, where the OPM engineering team uses them to create printable computer-aided-design flies with all the details, down to the screw holes, for implantation. A surgeon electronically reviews and approves the design and it is printed in OPM's biomedical clean rooms, built in 2011, using a selective laser sintering 3-D printer.

"Once we get a file, we can get it to a customer within two weeks," DeFelice said. "The actual manufacturing time is about a day, but there are lots of quality control and regulatory requirements to be met."

The entire treatment, from arrival in the surgical room to the final implantation, can take several months and cost between $8,000 and $15,000, but it provides benefits unmatched by other medical devices, DeFelice said. Since the implant is custom-built to fit the patient, the surgery itself is quicker with no last-minute device modifications, which saves money and helps reduce the chance of complications, he said. As an implantable polymer, PEKK is biocompatible, mechanically similar to bone, osteoconductive and radiolucent, cutting down on noise in future X-rays.

While most of the magic behind OsteoFab is in the proprietary PEKK polymer and the manufacturing process, the FDA "approves devices, not a polymer," so OPM has to map out future plans one device at a time.

"We went with the cranial implant for first approval because the need was the most compelling," DeFelice said. "But this is just the beginning. There's really no part of the body that will go untouched by this."

Looking ahead, DeFelice is interested in applying the OsteoFab technology to the diabetic foot market, replacing bones that have virtually turned to powder because of diabetes, as well as spinal trauma and radical joint revision.

In the meantime, OPM plans to continue offering its proprietary implant-grade PEKK in bars and pellets for injection molding and machining.

"We're migrating from being a material supplier — which we still do — to an orthopedic supplier directly to hospitals.," DeFelice said. "We still have a very broad biomedical product line that's got well-established proc­essability and good regulatory approval. There are three cleared grades, barium sulfate, carbon and then OsteoFab," DeFelice said, which is uncommon among manufactures, who generally prefer to deal only with OEMs and refuse to sell directly to molders.

"So the molders have been pushed out and haven't been able to do development. That's something we do differently," he said. "We will sell to molders and other smart people looking at problems, not just the OEMs, who don't always have a lot of processing knowledge."


Comments

HEADS UP: 3-D printing provides custom-made craniums

By Gayle S. Putrich
Staff Reporter

Published: April 2, 2013 1:18 pm ET
Updated: April 2, 2013 1:31 pm ET

Post Your Comments


Back to story


More stories

Image

Western Case grows with investments in infrastructure and equipment

February 27, 2015 5:56 pm ET

RIVERSIDE, CALIF. — Blow molder Western Case Inc. has invested significantly in infrastructure and equipment while relocating and raising the...    More

Image

Experts explain why resin sales are down in a healthy US economy

February 27, 2015 1:58 pm ET

The economies of the U.S. and Canada posted solid growth in 2014 — even though resin demand in those countries lagged behind.    More

Image

Industry vet Dwight Morgan joins M. Holland

February 27, 2015 1:55 pm ET

Resin distribution leader M. Holland Co. has hired industry veteran Dwight Morgan as its vice president of corporate development.    More

Image

Indian masterbatch makers growing locally and thinking globally

February 27, 2015 1:30 pm ET

GANDHINAGAR, INDIA — India’s masterbatch makers are expanding their domestic capacity to meet growing demand, as some are also moving...    More

Image

Born to be plastic — a DIY Harley-Davidson

February 27, 2015 11:12 am ET

Owning a real Harley-Davidson was not enough for bike nut Peter Manning; he wanted a model of his favorite motorcycle too.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events