Conair expands FLX, shows new NCF series

By Roger Renstrom
Correspondent

Published: April 2, 2013 9:39 am ET
Updated: April 2, 2013 10:17 am ET

Related to this story

Topics Medical, Machinery, Product News
Companies & Associations Conair Group Inc.

ANAHEIM, CALIF. -- Conair Group demonstrated complete remove-control capability and showed a new NCF granulator series at the Plastec West trade show Feb. 12-14 in Anaheim.

The auxiliary equipment maker has expanded its FLX material-handling control system to handle up to 128 loaders and 40 vacuum conveying pumps, said Jason Snyder, inside sales manager with Conair in Cranberry Township, Pa., near Pittsburgh.

At the Conair booth, Snyder used an Internet-connected laptop computer to control an FLX system in operation at Conair's technical center. A remote laptop user can deal with all functions as if standing at the machine interface on the plant floor, he said.

A 7½-inch color touch screen is the standard interface, and a 15-inch screen is an option.

Conair said the footprint of NCF supertangential granulators is more than 30 percent smaller than many other granulators with similar capabilities.

Four models have 8-inch-diameter rotors with a width range of 10-24 inches and standard maximum throughputs of 150-450 pounds. NCF is an upgrade of the design of Conair's decade-old CHS granulator series.

Pricing for the NCF series starts at $11,000, said Jeff Taylor, Conair's national sales manager for size-reduction equipment.

The design incorporates a raised rotor to make the inside systems more accessible.

Conair manufactures most NCF components and assembles the granulators in Franklin, Pa. The supertangential chamber is made in Sweden.

Separately, Conair teamed up with extruder maker American Kuhne of Ashaway, R.I., and controls specialist Zumbach Electronics Corp. of Mount Kisco, N.Y., to demonstrate close-tolerance extrusion of microbore medical tubing.

The core issue is controlling process variables, said Bob Bessemer, Conair's medical extrusion sales manager.

Conair supplied a MedVac vacuum sizing and cooling tank and a Medline puller/cutter.

Microbore tubing's nominal outside diameter is 0.02-0.07 inch with wall thickness up to 0.006 inch.

International Plastics Equipment Group Inc. of Cranberry Township is Conair's parent firm.


Comments

Conair expands FLX, shows new NCF series

By Roger Renstrom
Correspondent

Published: April 2, 2013 9:39 am ET
Updated: April 2, 2013 10:17 am ET

Post Your Comments


Back to story


More stories

Image

UMass Lowell hosts collaborative research meeting for future projects

July 30, 2014 11:54 am ET

The University of Massachusetts at Lowell recently hosted a seminar, which was billed as a collaborative research meeting between Dow Chemical Co.,...    More

Image

North American robot sales set record

July 30, 2014 4:46 pm ET

The North American robotics sector is off to its fastest start ever, shattering last year's first-half record, with a first-half 2014 of 14,135...    More

Image

Tessy investing $10 million in new plant, infrastructure

July 30, 2014 4:57 pm ET

Tessy Plastics Corp. continues to buy factory buildings in upstate New York — acquiring a 112,000-square-foot former Honeywell building in...    More

Red Wave machine helps sort 4,000 metric tons of mixed plastics recycling

July 30, 2014 11:00 am ET

Redwave, the Austrian manufacturer of optical sorting machines for recycled plastics, supplied a line for the IMOG sorting facility in South West...    More

Herbold system removes foreign materials from recycling machine

July 30, 2014 10:55 am ET

Herbold Meckeshneim GmbH has developed an affordable, simple solution to remove foreign material that enters recycling machine, such as metal parts an...    More

Market Reports

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events