Expanded polystryene recycler aims to double Asian exports

By Kate Tilley
Correspondent

Published: April 4, 2013 1:35 pm ET
Updated: April 4, 2013 1:37 pm ET

Related to this story

Topics Sustainability, Recycling

BRISBANE, AUSTRALIA — An Australian expanded polystyrene recycler can double exports to China and South Korea if its owner can convince more retailers to hand over EPS waste.

Polystyrene Recycling Queensland, a unit of Brisbane-based Global Interests Pty. Ltd., operates five granulators at electrical goods retail outlets in Queensland and northern New South Wales, which shrink waste EPS volume by 66 percent. The granules are transported to PRQ’s compacting plant, nine miles south of Brisbane’s central business district, where they are compacted into recyclable EPS logs and shipped to Asia.

Leo Sines, PRQ owner and managing director,  said PRQ ships a container of EPS logs weighing up to 17 tons each week to Chinese and Korean manufacturers. Those manufacturers process it into various products, including photo frame molds, coat hangers, synthetic timbers, and spoons and cutlery.

“We have forged a strong secondary reuse export market in China; right now Asia will buy every kilo I’ve got,” Sines said. He has not found any Australian manufacturers that will manufacture second-use EPS products.

PRQ has been shipping EPS waste to China for more than a decade. “Initially, we sent one container every two months. It has gradually grown,” Sines said.

He could double PRQ’s EPS exports, if more organizations recycled EPS waste packaging. Sines said research shows about 75 percent of electrical goods stores’ waste is EPS, but it is difficult to convince retailers to recycle.

“They just think waste is a cost of doing business.” He estimates PRQ recycles only 2-3 percent of Australian electrical appliance retailers’ EPS.

PRQ was launched after Australian EPS manufacturers identified a significant waste disposal problem and, in 1992, established an industry group called Recycling Expanded Polystyrene Australia to manage the problem. “The industry knew polystyrene could be recycled, but it wasn’t,” Sines said.

That industry group, now called Expanded Polystyrene Australia, established recycling centers and a national collection network in most capital cities. PRQ was its Queensland recycling and collection center.

Sines initially managed PRQ, but later bought it from Expanded Polystyrene Australia. It is now a unit of his company, Global Interests Pty. Ltd., which trades as Carton Warehouse. Carton sells new and used packaging, mainly for the fruit and vegetable industry, including polystyrene boxes and plastic pallets.

PRQ, in partnership with Queensland’s government, developed a prototype granulator in 2008 to help businesses condense EPS scrap. The five granulators are at the Good Guys Discount Warehouses (Australia) Pty. Ltd. stores. Melbourne-based Good Guys is a chain of almost 100 electrical appliance retail stores across Australia and New Zealand.

PRQ visits the stores twice a week to collect the granulated, bagged EPS waste. Sines estimates PRQ collects 131 square feet per store each time.

PRQ also has a drop-off center and collects EPS from fruit and vegetable and seafood retailers and pharmacies.

The company’s plant recycles 882,000 to 1.1 million pounds a year. “We have so far diverted more than 10.5 million cubic feet of EPS from landfill, but we can take it all,” Sines said.

He said the state of Queensland alone generates more than 24 million pounds annually. “While about half this material is used for long-term building and construction, the remaining mass will ultimately go to landfill if it doesn’t reach our chippers first,” he said.


Comments

Expanded polystryene recycler aims to double Asian exports

By Kate Tilley
Correspondent

Published: April 4, 2013 1:35 pm ET
Updated: April 4, 2013 1:37 pm ET

Post Your Comments


Back to story


More stories

Image

Study: 100 times less plastic than expected polluting ocean surface

July 23, 2014 3:46 pm ET

There's as much as 100 times less plastic floating on surface of the world's oceans than would be expected given the mushrooming use of the material...    More

Image

Plastics industry blasted for stance in green building debate

July 22, 2014 2:45 pm ET

The plastics industry has taken high-profile stance in the debate over green building standards. The result, today at least, is that it's getting...    More

Image

Plastics help designers bring home the gold

July 22, 2014 2:15 pm ET

Products with polymer content received multiple gold recognitions in the 2014 International Design Excellence Awards.    More

Image

Evolving with the times helps Ohio's Midwest Elastomers prosper

July 22, 2014 12:53 pm ET

Midwest Elastomers Inc. is 35 years old this year, and if the company hadn't abandoned its roots and evolved, it long ago could have gone the way of...    More

Image

Beer maker Carlsberg enlists suppliers for 'upcycling' project

July 22, 2014 11:14 am ET

Carlsberg Breweries A/S in Denmark has started an ambitious project with its suppliers to optimize its packaging for the purpose of “upcycling.&...    More

Market Reports

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Plastics Recycling Market Review & Outlook 2014

This special report from Plastics News examines the North American plastics recycling industry and provides insight into indicators that impact market viability, including Resin pricing trends for virgin and recycled market material and historical Resin production trends for post- consumer and industrial waste.

Learn more

Shale Gas Market - Analysis of North American Region

This report highlights the impact of shale-based natural gas on the North American plastics market and features an in-depth analysis of production trends in the United States during 2013 and a forecast for 2014 and beyond.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events