Sumitomo Demag invests in press rebuilding in Strongsville, Ohio

By Bill Bregar
Senior Staff Reporter

Published: April 11, 2013 4:33 pm ET
Updated: April 11, 2013 7:17 pm ET

Image By: Sumitomo (SHI) Demag Sumitomo (SHI) Demag opened its Technology Center in Strongsville, Ohio, on April 10.

Related to this story

Topics Machinery, K 2013
Companies & Associations Sumitomo Demag Plastics Machinery GmbH

STRONGSVILLE, OHIO — Sumitomo (SHI) Demag held a grand opening of a sparkling new Technology Center in Strongsville April 10, and 125 attendees also toured a press rebuilding operation for the scores of Van Dorn-brand machines running parts in North America.

The Technology Center, in a walled-off portion of the factory, houses seven Sumitomo Demag injection presses, all-electric, hybrid and hydraulic machines in clamping forces from 56 to 652 tons.

Visitors to the grand opening saw the new presses running parts. Customers will be able to do mold trials and get technical training in Strongsville. Out in the rebuilding area, they can check out the first-ever Midget Molder, a hand-operated press built at the old-line Cleveland manufacturer, Van Dorn Plastic Machinery Co.

The event highlighted the investment and support of Japanese parent Sumitomo Heavy Industries Ltd., said Sumitomo Demag CEO Tetsuya Okamura. Last year, he also became senior vice president and a member of the executive board of Sumitomo Heavy Industries.

The open house brought new attention to the sprawling industrial building in suburban Cleveland, where for years, hundreds of people worked to build Van Dorn injection molding presses. That manufacturing operation shut down in 2007, when Van Dorn, then called Demag Plastics Group, was owned by a German machinery group.

The following year, Sumitomo Demag was formed when the Tokyo-based conglomerate and injection press builder Sumitomo Heavy Industries purchased the operations in Strongsville, Germany and China.

A scaled-down Strongsville facility remained open the whole time, to handle U.S. sales and service. Strongsville introduced a retrofit controller package, called the VDU (Van Dorn Universal) to support its huge number of "legacy" machines. Then last spring at NPE2012, Sumitomo Demag unveiled its ability to rebuild used equipment in Strongsville.

Equipped with big industrial cranes and very high ceilings, the industrial building is well-suited for working on the 30 to 40 machinery rebuilds technicians expect to handle a year. And John Martich III, chief operating officer of the company's U.S. operations, said Strongsville stocks about 55 to 60 new Sumitomo Demag machines—about 40-50 of them all-electric presses.

Officials of the company linking machinery from Japan, German and the United States have worked to create a unified product line. At the same time, executives respect Van Dorn's legacy fleet, which Martich estimated at 23,000 presses operating in North America. About 7,600 of them are HTs, a popular line of toggle-clamp machines that the Germans discontinued a few months before ending U.S. assembly altogether.

Today, many of the employees in Strongsville's rebuilding and retrofit operation are veterans who helped build the new machines originally, Martich said.

Strongsville employs 57 people, up from a low of 40 during the recession. That's a far cry from 700 that toiled there in the mid-1990s, but "Van Dorn" is still well-known locally. The mayor of Strongsville stopped by during the grand opening.

Martich is a 26-year veteran of the Strongsville operation, now called Van Dorn Demag Corp. The machinery company now occupies 120,000 square feet, or about half of the total 240,000 building. Other companies are renting the rest as warehouse space.

The Technology Center portion measures 8,250 square feet.

Martich said the rejuvenated building represents the continuing integration of the global company. Strongsville, located next to the Ohio Turnpike and I-71, is a good location, he said.

"Take a broad product offering—all-electric, hydraulic, hybrid machinery. And bring that together in a new technology center, with our current after-sales solutions. Represent that in a single location in the heart of the Midwest, the home of the largest population of molders in North America," Martich said. "Customers come, they can see molding demonstrations, do hands-on technical training, mold trials, all of that here in our facility. Under one roof."

Okamura said Sumitomo Demag understands the years of expertise of the Van Dorn employees. "No one can do such a retrofit business," he said, calling the large installed base of presses "a very big asset."

He said that spare parts and service of Van Dorn machines are important, but rebuilding makes the company stay sharp: "We want to keep their technology, and the retrofit business is a good way to keep their technology."

Martich said the fact that Strongsville manufactured machines for decades is "a clear strength for us." Although Van Dorn Demag is outsourcing its machining work, the company has the engineering drawings and a complete understanding of the equipment, he said.

Martich ticked off the reasons. "The original configurations. The original software. The configuration of the hydraulic circuit. The way the machine functions, the sequence diagram of the circuit itself, not only the electrical/electronic circuit but also the hydraulic circuitry, the way it sequences. The valves you use. The type of components. I mean, it's huge. To do that if you were not an OEM, is an enormous task."

Steven Ross, aftersales and service representative, showed off the expertise during a tour of the rebuild area. He said the first remanufactured machine was a Sumitomo SG125. Employees rebuilt the toggle clamp and the injection unit, and married a VDU control retrofit to the original hydraulic system.

An aging press came from a customer who picked it up an auction. Engel and Milacron presses came from trade-ins.

The rebuild team works closely with the customer to plan the job. On hydraulic machines, the hydraulic cylinder gets reground to bring it back to like-new specifications. Crews tear apart the injection unit and can install new screws. They can replace all seals and bearings. Ross said that when they install new valves on a press, they rebuild the old valves, so the customer then has two sets.

The Van Dorn Demag team now has five years' experience with the retrofit VDU controller, which can significantly upgrade a used machine. Ross said the company has done about 300 VDU conversions at customers' plants so far, on Van Dorn presses with an average age of 12 to 17 years.

The Strongsville plant has remained open, through a series of owners and the economic recession. It's had a purpose. Now the U.S. market has rebounded for new injection presses. And companies continue to hang onto older machines.

"We have continued to be agile enough to move with the changing market conditions," Martich said.


Comments

Sumitomo Demag invests in press rebuilding in Strongsville, Ohio

By Bill Bregar
Senior Staff Reporter

Published: April 11, 2013 4:33 pm ET
Updated: April 11, 2013 7:17 pm ET

Post Your Comments


Back to story


More stories

Image

Soaring business leads to growth for Composites Horizons

August 19, 2014 1:56 pm ET

Composites Horizons LLC is investing $12 million in new equipment and processes, in part for ceramic matrix composite production in its fourth...    More

Image

Material Insights: PolyOne shows off material to designers

August 18, 2014 12:39 pm ET

PolyOne takes its shape memory polymers to a designers conference, PET resin prices rise and Lanxess announces expansion.    More

Image

Acoustiblok soundly defeats cable show competitors

August 15, 2014 12:02 pm ET

Did you hear what happened when an ear-piercing train horn was enclosed in a flexible plastic membrane only a quarter-inch thick? Nothing.    More

Image

Trade group lists China's top plastics machinery manufacturers

August 15, 2014 9:58 am ET

The China Plastic Machine Industry Association has unveiled its latest rankings of the top 25 plastics machinery suppliers in China as well as...    More

Image

Wittmann Battenfeld adding machining center in Austria

August 15, 2014 9:42 am ET

Austrian injection molding and auxiliary equipment machinery company Wittmann Battenfeld GmbH is already increasing capacity of the new assembly hall ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events