Chinese firms make push into South Korea

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 16, 2013 1:43 pm ET
Updated: April 16, 2013 1:51 pm ET

Korea Yizumi

Image By: Plastics News photo by Steve Toloken Yizumi's James Zhang, right, said the company sees opportunities among more cost-conscious Korean manufacturers.

Related to this story

Topics Asia, Machinery

SEOUL, SOUTH KOREA — China's plastics machinery industry is making a push into South Korea, one of Asia's largest markets, with the Chinese taking on a much bigger presence at Korea's national plastics exhibition and some reporting rapidly growing sales.

Officials of China's largest plastics equipment maker, Haitian International Holdings Ltd., for example, said in an interview at the recent Koplas fair in Seoul that the firm sold 150 presses in Korea last year, up from 90 in 2010, and it expects to top 200 this year.

Several of China's biggest injection molding machinery makers either made their first appearance at Korea's national Koplas show, held March 12-16, or had much larger booths than previous years, and said they were targeting the market.

It's a change for Koplas, which typically has attracted European, Japanese and American machinery suppliers, in addition to the domestic Korean ones. Those firms remained, but the rising Chinese presence, with each company putting several machines on the show floor, drew the attention of Korean competitors.

"Haitian's strategy to enter the Korean market is very aggressive," said Andrew Kim, a sales executive at Woojin Plaimm Inc., one of Korea's largest press makers. "Of course we are concerned about [the increased presence generally of Chinese firms] because their price is cheap. They are potentially big competitors."

Korea's market is technically sophisticated, driven by requirements from its multinationals in the consumer electronics and car industries, such as Samsung, LG, Hyundai and Kia.

While some executives wondered if the Korean expansion was motivated by a desire to find alternative markets as China's domestic economy slows, the Chinese said they were drawn by bargain-hunting among some Korean manufacturers and by a desire for a foothold in Korea's domestic market. Also, the Chinese said they hope they can boost sales at factories that are part of the global supply chain of Korea's conglomerates.

"We know this market is very big," said Kevin Wang, a regional sales manager for Hong Kong-based Cosmos Machinery Ltd., in an interview at the company's Koplas booth. "It's not only the local market, but also the Korean companies in other countries."

Outside of Haitian, Chinese efforts were just beginning, and it was hard to tell if they would succeed. Guangdong Yizumi Precision Machinery Co. Ltd. in Foshan, China, for example, last year got its machines certified to meet South Korea's safety standards, and signed a local agent.

"For Korea, the customer base has a high level of requirements, for quality, for features and for safety," said Michelle Chen, regional sales manager in the firm's global development department. Chen said safety was particularly important for Korean companies.

James Zhang, Yizumi's deputy general manager, said his company sees an opening in the market because Korean firms are looking for more cost-effective machinery, and he said Chinese quality is getting better.

Lainus Lee, president of Haitian Korea Co. Ltd., said Korean firms are changing their perceptions since he first started selling Chinese equipment in 2004.

"Many Korean customers have changed their minds," Lee said. "Before, 'Made in China' meant it was not good. Now, they've changed."

Another large South Korean press maker, LS Cable & System Ltd. of Anyang, said it has noticed more Chinese firms in the market.

Others in Korea said they did not see the Chinese as much of an issue for them, and said the Chinese would likely target lower-end molding like housewares.

Still, the Chinese were not the only ones expanding in Korea. Austria's Engel Holdings GmbH used the show to hold an opening ceremony for the doubling of capacity at its Pyeongtaek, South Korea, factory, an investment of 8 million euros ($10.4 million).


Comments

Chinese firms make push into South Korea

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: April 16, 2013 1:43 pm ET
Updated: April 16, 2013 1:51 pm ET

Post Your Comments


Back to story


More stories

Image

2014 US machinery shipments up 6 percent

November 25, 2014 5:17 pm ET

Through the first nine months of 2014 U.S. shipments of primary plastics equipment — for injection molding, blow molding and extrusion —...    More

Image

Globalization brings sizable growth, primarily in Asia

November 25, 2014 1:40 pm ET

In 1990, the year after Plastics News published our first issue, there were 33,000 injection molding machines sold worldwide. Fast forward to 2013,...    More

Image

Taipei Plas vandal and German firm trade lawsuits

November 25, 2014 1:26 pm ET

Taiwan businessman Karma Tang, who splashed red paint at German firm Baumüller GmbH's Taipei Plas booth, is in a messy legal battle.    More

Image

Auxiliary equipment maker Ross expands in India

November 25, 2014 1:12 pm ET

U.S. auxiliary equipment maker Charles Ross & Son Co. is expanding in India, opening a new plant early next year in Pune.    More

Image

Onex buying packaging group SIG Combibloc

November 24, 2014 9:05 am ET

ex Corp. will buy SIG Combibloc Group, the Switzerland-based manufacturer of aseptic carton packaging and plastics closures from New Zealand's Rank Gr...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events