Aither Chemicals mulls plans for cracker and PE plant in Marcellus Shale region

By Frank Esposito
Senior Staff Reporter

Published: April 18, 2013 12:00 pm ET
Updated: April 18, 2013 2:22 pm ET

Related to this story

Topics Materials, Materials Suppliers

SOUTH CHARLESTON, W.VA. — Aither Chemicals LLC has its eye on building a natural gas-based cracker unit that would make polyethylene and related products at a location in Ohio, Pennsylvania or West Virginia.

Access to newly discovered natural gas in the Marcellus Shale region is a key to the project for South Charleston, W. Va.-based Aither.

"The purpose is to locate a cracker at the source of the raw material," spokesman Jason Keeling said in an April 18 phone interview. "We're still in the process of identifying various partners and looking at potential sites."

In mid-2012, Aither held an "open season" in which potential customers and products for the proposed plant were identified. Global materials maker Bayer MaterialScience LLC worked with Aither on that process, which resulted in PE, ethylene, ethylene oxide, ethylene glycol and acetic acid being identified as the products that would be the focus of Aither's commercial production.

At the time, Aither officials said the firm received positive response from potential purchasers of those products, as well as from technology licensors, engineering procurement and construction companies, potential licensees and companies considering relocation to the Marcellus region.

No timetable for a decision is in place, Keeling said, but the firm previously said plant construction would cost $750 million over a period of two to three years. The plant would generate annual sales of about $450 million, depending on product mix and location.

On the jobs front, the proposed Aither plant would create 200 permanent jobs and 2,000 temporary construction jobs. Indirect job creation from the project could result in as many as 1,400 more permanent jobs, officials said.

Aither's proprietary production process would allow for lower energy inputs and lower carbon dioxide output, as well as lower capital and operating costs and a shorter time to commercial operations, officials said.

Aither was launched in 2010 by the Mid-Atlantic Technology, Research & Innovation Center (MATRIC), an R&D firm based in South Charleston. Other investors in the company include INNOVA Commercialization Group, the West Virginia Jobs Investment Trust and TechConnect West Virginia.

Aither is one of three firms that have proposed new petrochemical plants in the Marcellus region as a result of the natural gas boom. Shell Chemical has proposed a massive project in Monaca, Pa., near Pittsburgh. Appalachian Resins is planning a smaller-scale PE and ethylene unit at an undisclosed site in West Virginia.


Comments

Aither Chemicals mulls plans for cracker and PE plant in Marcellus Shale region

By Frank Esposito
Senior Staff Reporter

Published: April 18, 2013 12:00 pm ET
Updated: April 18, 2013 2:22 pm ET

Post Your Comments


Back to story


More stories

Image

Oxford Polymers adds compounding capacity

January 30, 2015 1:16 pm ET

Materials maker Oxford Polymers has increased its compounding capacity by installing a new single-screw extrusion line.    More

Image

Marval's next generation expands capacity

January 30, 2015 1:27 pm ET

MAMARONECK, N.Y. — There’s a lot of history at Marval Industries Inc., but the 59-year-old compounding firm also is looking toward the...    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

UPDATED — Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Resin prices continuing to tumble

January 29, 2015 2:24 pm ET

The ongoing slide in crude oil prices is taking commodity resin prices down as well.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events