Axiall developing alternatives for phthalates and heavy metals in PVC compounds

Published: April 18, 2013 11:27 am ET
Updated: April 18, 2013 11:29 am ET

Related to this story

Topics Materials, Sustainability, Compounding, Materials Suppliers
Companies & Associations Georgia Gulf Corp.

NEW ORLEANS — Axiall Corp. has developed PVC compounds that swap phthalates and heavy metals for organic alternatives, and give builders controversy-free PVC products that could help them meet environmental and health and safety requirements.

The flexible and rigid PVC compounds were created through collaborations between Atlanta-based Axiall and several partners.

The compounds are designed to be cost neutral and perform equally or better than their traditional counterparts, said Bridget Confait Smith, development chemist at Axiall, in a presentation at the Global Plastics Environmental Conference.

Two years ago, Axiall (then Georgia Gulf Corp.) researchers began work on the firm's overarching sustainability program. At the same time, customers started requesting flexible PVC that didn't contain phthalates — the controversial plasticizers are petroleum-based and non-renewable, and are slowly becoming regulated or banned due to health concerns, Confait Smith said.

The materials major also sought alternatives to the heavy metal stabilizers used in rigid PVC, especially zinc. The element, along with being a questionable metal, can also cause "zinc burning" problems in PVC, she said.

In addition to swapping out controversial components, Axiall set out to make PVC that would meet government regulations.

The solution: flexible PVC that uses plasticizers made from renewable feedstock like plant life, bio-matter and natural oils. And rigid PVC that uses a proprietary organic stabilizer made from proteins.

All of the products in Axiall's bio-based PVC line contain more than 25 percent renewable content, qualifying them for the U.S. Department of Agriculture's BioPreferred Program, Confait Smith said, adding that flexible PVC products contain 39.5 percent to 53 percent renewable content, depending on loading.

The PVC also meets Volatile Organic Compound regulations — vital for builders trying to earn Leadership in Energy and Environmental Design credits, including the strict VOC limits set by the GreenGuard Children & Schools certification program.

GreenGuard tests for indoor air quality. Axiall met the program's requirements at the most stringent level, she said.

Compared to traditional PVC, the new compounds have the same physical properties, but do show improved stability in regards to color hold. The flexible PVC also has a lower brittle point temperature — a significant upgrade "with no additional costs to customers," Confait Smith noted, — and heat temperature is lower for the rigid PVC.

In preliminary "cradle to gate" life cycle analysis, the products show an improved environmental impact with less carbon dioxide emissions, she said.

The bio-based PVC line is commercially available, including a line of PVC for medical operations.

Axiall is currently working on flexible PVC that could be used for wire and cable operations. The material has passed standard volatility tests at 136° C, a requirement for those applications.

GPEC 2013 was held March 20-22 in New Orleans.


Comments

Axiall developing alternatives for phthalates and heavy metals in PVC compounds

Published: April 18, 2013 11:27 am ET
Updated: April 18, 2013 11:29 am ET

Post Your Comments


Back to story


More stories

Image

2014 leaves some resin firms in the black while others struggle

January 23, 2015 2:37 pm ET

On the financial side, 2014 was good for Hexcel Corp., so-so for Celanese Corp. and it could have been better for Omnova Solutions.    More

Image

Clariant's ColorForward predicts future consumer trends

January 23, 2015 1:33 pm ET

Clariant International Ltd. is marking a decade of color forecasting with the 10th edition of its ColorForward program.    More

Image

The future for PolyOne is colorful

January 23, 2015 1:28 pm ET

PolyOne Corp. is writing four color stories for 2016.    More

Image

Mexico's Polymer Solutions looks to grow, expand offerings with name change

January 23, 2015 12:03 pm ET

British biodegradable additives developer Symphony Environmental Technologies plc's Mexico distributor has changed its name from Plásticos...    More

Image

Recycling Partnership coalition kicks off its initial curbside project

January 22, 2015 3:51 pm ET

The Recycling Partnership's inaugural effort to boost curbside recycling around the country kicked off this week in Columbia, S.C.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events