Axiall developing alternatives for phthalates and heavy metals in PVC compounds

Published: April 18, 2013 11:27 am ET
Updated: April 18, 2013 11:29 am ET

Related to this story

Topics Sustainability, Materials, Materials Suppliers, Compounding
Companies & Associations Georgia Gulf Corp.

NEW ORLEANS — Axiall Corp. has developed PVC compounds that swap phthalates and heavy metals for organic alternatives, and give builders controversy-free PVC products that could help them meet environmental and health and safety requirements.

The flexible and rigid PVC compounds were created through collaborations between Atlanta-based Axiall and several partners.

The compounds are designed to be cost neutral and perform equally or better than their traditional counterparts, said Bridget Confait Smith, development chemist at Axiall, in a presentation at the Global Plastics Environmental Conference.

Two years ago, Axiall (then Georgia Gulf Corp.) researchers began work on the firm's overarching sustainability program. At the same time, customers started requesting flexible PVC that didn't contain phthalates — the controversial plasticizers are petroleum-based and non-renewable, and are slowly becoming regulated or banned due to health concerns, Confait Smith said.

The materials major also sought alternatives to the heavy metal stabilizers used in rigid PVC, especially zinc. The element, along with being a questionable metal, can also cause "zinc burning" problems in PVC, she said.

In addition to swapping out controversial components, Axiall set out to make PVC that would meet government regulations.

The solution: flexible PVC that uses plasticizers made from renewable feedstock like plant life, bio-matter and natural oils. And rigid PVC that uses a proprietary organic stabilizer made from proteins.

All of the products in Axiall's bio-based PVC line contain more than 25 percent renewable content, qualifying them for the U.S. Department of Agriculture's BioPreferred Program, Confait Smith said, adding that flexible PVC products contain 39.5 percent to 53 percent renewable content, depending on loading.

The PVC also meets Volatile Organic Compound regulations — vital for builders trying to earn Leadership in Energy and Environmental Design credits, including the strict VOC limits set by the GreenGuard Children & Schools certification program.

GreenGuard tests for indoor air quality. Axiall met the program's requirements at the most stringent level, she said.

Compared to traditional PVC, the new compounds have the same physical properties, but do show improved stability in regards to color hold. The flexible PVC also has a lower brittle point temperature — a significant upgrade "with no additional costs to customers," Confait Smith noted, — and heat temperature is lower for the rigid PVC.

In preliminary "cradle to gate" life cycle analysis, the products show an improved environmental impact with less carbon dioxide emissions, she said.

The bio-based PVC line is commercially available, including a line of PVC for medical operations.

Axiall is currently working on flexible PVC that could be used for wire and cable operations. The material has passed standard volatility tests at 136° C, a requirement for those applications.

GPEC 2013 was held March 20-22 in New Orleans.


Comments

Axiall developing alternatives for phthalates and heavy metals in PVC compounds

Published: April 18, 2013 11:27 am ET
Updated: April 18, 2013 11:29 am ET

Post Your Comments


Back to story


More stories

Materials firm realigns business divisions

October 20, 2014 1:23 pm ET

Trinseo S.A., formerly known as Styron L.L.C., is realigning its business divisions, creating two new business groups — Performance Materials...    More

Image

Corbion Purac collaboration taking bioplastics into even more uses

October 17, 2014 6:00 am ET

Corbion Purac NV's collaboration with Taiwan-headquartered compounder Supla Co. Ltd. and Taiwan electronics producer Kuender & Co. is paying...    More

Image

Momentive gearing up for some timely LSR sales

October 17, 2014 10:58 am ET

Momentive Performance Materials Inc. has plenty of time for customers at Fakuma — thanks to colorful new watchbands made with the firm's fiber-...    More

Image

Evonik sees clear growth opportunities with new Plexiglas Resist resin

October 17, 2014 6:00 am ET

Evonik Industries AG presented a new specialty molding compound during Fakuma in Friedrichshafen with which it plans to exploit the growing demand...    More

Image

Teknor adding second UK production line

October 17, 2014 9:25 am ET

Teknor Apex Co. will add a second thermoplastic elastomer production line at its United Kingdom plant by the end of 2015 to meet growing demand.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events