Conair parent buys Thermal Care

By Michael Lauzon
Correspondent

Published: April 26, 2013 3:09 pm ET
Updated: April 26, 2013 3:12 pm ET

Image By: IPEG Inc. Chris Keller, CEO of IPEG Inc.

Related to this story

Topics Mergers & Acquisitions, Machinery
Companies & Associations Conair Group Inc.

CRANBERRY TOWNSHIP, PA. —The combination of Conair Group and Thermal Care Inc. should create a powerhouse in plastics heat-transfer technology, officials said in an April 26 teleconference.

The two firms' thermal technology overlaps but together their engineers can advance the technology in plastics markets, said Chris Keller, CEO of IPEG Inc. — Conair's owner and soon to be owner of Thermal Care. The companies expect the combination to be a heavyweight in plastics thermal control.

"We've known Thermal Care for many years and see it as a strategic and cultural fit," Keller said.

IPEG boosted its stake in plastics auxiliary equipment earlier in April when it bought Republic Machine Inc., a producer of single-shaft shredders in Louisville, Ky. Republic will operate as a division of Rapid Granulator AB, an IPEG-owned maker of granulators and smaller, high-speed grinders. Bredaryd, Sweden-based Rapid currently makes only one single-shaft shredder, the Granumatic, and Republic adds a broad line of shredders, including large machines that handle film, wood, rubber and medical waste.

Rapid CEO Kirk Winstead said IPEG will retain Republic Machine's management, including founder George Sotsky.

Terms were not disclosed for either deal.

The Thermal Care acquisition is expected to close April 30.

Keller said IPEG's recent acquisitions give it a lot to digest but the company is not ruling out other acquisitions.

Thermal Care is a big producer of temperature controllers, portable and central chillers, cooling towers and pump tanks for plastics and other industries. Conair has similar product lines. Keller declined to disclose the differences between the firms' technologies.

Conair, based in Cranberry Township, near Pittsburgh, and Thermal Care will operate independently but will share resources. Thermal Care, as a wholly owned subsidiary of IPEG, will maintain its production and offices in Niles, Ill.

Thermal Care and Conair have similar water temperature control technologies but have rarely competed for the same business. Thermal Care's business has been localized in North America. Conair is more globally represented but also weighted to the U.S. Rapid Granulator has heavy overseas sales.

IPEG's ownership of Thermal Care dovetails with its emphasis on plastics machinery, according to Keller. Thermal Care's former owner, publicly traded MFRI Inc., said it will focus on piping systems and filtration products.

Conair President Larry Doyle said the Thermal Care-Conair combination will feature 20 full-time engineers working on heat-transfer equipment.

"And that doesn't even include systems and applications engineering staff," Doyle said in a news release. Doyle last year was promoted from Conair's vice president of global sales and marketing to the presidential post.

IPEG provides support for its brands in the U.S., Sweden, China and India. The Thermal Care purchase will diversify its involvement in markets beyond plastics. About half of Thermal Care's sales flow into fifty other industries, including printing, laser cooling, heat treating, die casting and optical coating.

Tom Benson, a 25-year employee for Thermal Care and its former vice president of sales and marketing, will be named its president.

In addition to single-shaft shredders, Republic designs specialized shredders to handle long lengths of plastic pipe, profiles, carpet and plastic lumber. They feature the modular Split-A-Part design, which makes it easy to clean and maintain the shredder, and the Zoidal cutting system, which prevents film and fiber scrap from wrapping around the robot, reduces cutter wear and allows tighter cutting tolerances. In North America the shredders will be sold through existing Republic distribution channels and globally through Rapid and Conair.


Comments

Conair parent buys Thermal Care

By Michael Lauzon
Correspondent

Published: April 26, 2013 3:09 pm ET
Updated: April 26, 2013 3:12 pm ET

Post Your Comments


Back to story


More stories

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a...    More

Image

High pressure RTM systems moving from Europe to Mexico

November 20, 2014 4:24 pm ET

Engel Holding GmbH's subsidiary in Mexico says it has sold the first high pressure resin transfer machine system (HP-RTM) in the Americas to a...    More

Image

Coveris changes culture, eyes IPO

November 20, 2014 1:40 pm ET

CEO Gary Masse has a simple message, and some new math, for everyone at Coveris Holdings Corp. Get on board or get out of the way.    More

Image

Total to buy majority stake in Polyblend

November 20, 2014 10:04 am ET

French oil and gas giant Total SA will buy a 68 percent stake in Germany's Polyblend GmbH, a subsidiary of Polymer-Chemie GmbH.    More

Image

Private equity fuels acquisition market

November 18, 2014 11:52 am ET

Plastics firms and outside investors with money to spend increasingly have done so in the plastics industry for the last quarter-century — and p...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events