Wittmann Battenfeld bets on growing market for big presses

By Bill Bregar
Senior Staff Reporter

Published: April 26, 2013 2:18 pm ET
Updated: May 7, 2013 9:07 am ET

Image By: Wttmann Group An in-mold label system in operation at Wittmann Battenfeld's Competence Days

Related to this story

Topics Machinery, K 2013
Companies & Associations Wittmann Battenfeld GmbH

KOTTINGBRUNN, AUSTRIA — Wittmann Battenfeld GmbH generated 2012 sales of 275 million euros ($358 million), about 10 percent higher than 2011, and officials said an expansion into bigger injection presses and a big backlog at the end of year points to higher sales in 2013.

The Kottingbrunn-based machinery maker plans to show a much larger press, with 1,600 tons of clamping force, at K 2013.

Wittmann Battenfeld's machines had topped out at 1,100 tons, but the company showed off its new 17,220-square-foot addition at its Competence Days 2013 event. Some 900 visitors toured the expansion in Kottingbrunn, which also features higher ceiling and larger cranes.

Wittmann Group General Manager and Georg Tinschert, managing director and CEO of Wittmann Battenfeld, analyzed the business conditions at an April 24 news conference.

Wittmann Battenfeld has missed out on some large-press sales to the robust automotive market because of press-size limitations. And automotive, at about 50 percent of total sales, is a major area for the company, Tinschert said.

But going up to 1,600 tons will help, especially in the home market of Europe, which generates 57 percent of business, he said. That's because 98 percent of all injection presses sold in Europe are 1,500 tons and below, he said.

Wittmann and Tinschert gave an upbeat forecast for this K-show year, but said they still were a bit conservative, given differences in economies around the world. The company makes injection presses, robots ands auxiliary equipment.

Sales to Asia have been "rather stable" at around 14 percent of total business, Michael Wittmann said.

"North America has been performing extremely well for us," he said. North America accounts for 28 percent of companywide sales.

Visitors to Competence Days saw 17 injection molding machines turning out everything from a hockey stick made by the Airmould process to a a bucket with handle assembled inside the mold to a credit card of polylactic acid produced with in-mold labeling.

They also saw some European-style showmanship. After technical sessions and lunch, the sound system boomed out some hard-rock beat riffs — like from the Iron Man movies. In marched a Wittmann robot-man, followed by a contingent of young men and woman that were clad in futuristic, skimpy outfits. The crowd followed as the hulking robot mechanically strode into the factory area.

Once inside, Wittmann Battenfeld's overhead cranes lifted a stage high into the air, where three drummers pounded out beats on metal barrels, Blue Man-group style. A team of trapeze artists also was raised above the crowd by the crane.

Fireworks sparkled up in the back of the machinery hall — a heavy metal experience to show off the big iron.


Comments

Wittmann Battenfeld bets on growing market for big presses

By Bill Bregar
Senior Staff Reporter

Published: April 26, 2013 2:18 pm ET
Updated: May 7, 2013 9:07 am ET

Post Your Comments


Back to story


More stories

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Cartoonist Rich Williams: If I could make HDPE funny, my powers would be limitless

November 21, 2014 1:41 pm ET

For the past 25 years, Rich Williams has been a fixture in the Plastics News staff box, and on our editorial page. Rich “speaks” to our...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Image

Renners leaving Sumitomo (SHI) Demag

November 21, 2014 10:01 am ET

Christian Renners is leaving injection molding press manufacturer Sumitomo (SHI) Demag Plastics Machinery GmbH, the company announced Nov. 21.    More

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a p...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events