Wittmann Battenfeld bets on growing market for big presses

By Bill Bregar
Senior Staff Reporter

Published: April 26, 2013 2:18 pm ET
Updated: May 7, 2013 9:07 am ET

Image By: Wttmann Group An in-mold label system in operation at Wittmann Battenfeld's Competence Days

Related to this story

Topics Machinery, K 2013
Companies & Associations Wittmann Battenfeld GmbH

KOTTINGBRUNN, AUSTRIA — Wittmann Battenfeld GmbH generated 2012 sales of 275 million euros ($358 million), about 10 percent higher than 2011, and officials said an expansion into bigger injection presses and a big backlog at the end of year points to higher sales in 2013.

The Kottingbrunn-based machinery maker plans to show a much larger press, with 1,600 tons of clamping force, at K 2013.

Wittmann Battenfeld's machines had topped out at 1,100 tons, but the company showed off its new 17,220-square-foot addition at its Competence Days 2013 event. Some 900 visitors toured the expansion in Kottingbrunn, which also features higher ceiling and larger cranes.

Wittmann Group General Manager and Georg Tinschert, managing director and CEO of Wittmann Battenfeld, analyzed the business conditions at an April 24 news conference.

Wittmann Battenfeld has missed out on some large-press sales to the robust automotive market because of press-size limitations. And automotive, at about 50 percent of total sales, is a major area for the company, Tinschert said.

But going up to 1,600 tons will help, especially in the home market of Europe, which generates 57 percent of business, he said. That's because 98 percent of all injection presses sold in Europe are 1,500 tons and below, he said.

Wittmann and Tinschert gave an upbeat forecast for this K-show year, but said they still were a bit conservative, given differences in economies around the world. The company makes injection presses, robots ands auxiliary equipment.

Sales to Asia have been "rather stable" at around 14 percent of total business, Michael Wittmann said.

"North America has been performing extremely well for us," he said. North America accounts for 28 percent of companywide sales.

Visitors to Competence Days saw 17 injection molding machines turning out everything from a hockey stick made by the Airmould process to a a bucket with handle assembled inside the mold to a credit card of polylactic acid produced with in-mold labeling.

They also saw some European-style showmanship. After technical sessions and lunch, the sound system boomed out some hard-rock beat riffs — like from the Iron Man movies. In marched a Wittmann robot-man, followed by a contingent of young men and woman that were clad in futuristic, skimpy outfits. The crowd followed as the hulking robot mechanically strode into the factory area.

Once inside, Wittmann Battenfeld's overhead cranes lifted a stage high into the air, where three drummers pounded out beats on metal barrels, Blue Man-group style. A team of trapeze artists also was raised above the crowd by the crane.

Fireworks sparkled up in the back of the machinery hall — a heavy metal experience to show off the big iron.


Comments

Wittmann Battenfeld bets on growing market for big presses

By Bill Bregar
Senior Staff Reporter

Published: April 26, 2013 2:18 pm ET
Updated: May 7, 2013 9:07 am ET

Post Your Comments


Back to story


More stories

Image

Material Insights: Experts discuss why resin demand is dipping while economy hums

March 2, 2015 3:04 pm ET

Demand for resin is lower and prices are dropping as the economy picks up. In addition, Solvay announces an expansion.    More

Image

Western Case grows with investments in infrastructure and equipment

February 27, 2015 5:56 pm ET

RIVERSIDE, CALIF. — Blow molder Western Case Inc. has invested significantly in infrastructure and equipment while relocating and raising the...    More

Image

West Coast ports dispute impacts machinery imports

February 27, 2015 5:00 pm ET

Asian machinery companies got caught in the West Coast ports labor dispute — causing some headaches to get equipment ready for NPE 2015.    More

Image

Wittmann, Illig among machinery firms boosting investments in India

February 27, 2015 1:34 pm ET

GANDHINAGAR, INDIA — Expected growth in the Indian plastics market is leading several global machinery firms to make investments there,...    More

Image

Born to be plastic — a DIY Harley-Davidson

February 27, 2015 11:12 am ET

Owning a real Harley-Davidson was not enough for bike nut Peter Manning; he wanted a model of his favorite motorcycle too.    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events