14 workers injured in fire at Formosa Plastics

By Frank Esposito
Senior Staff Reporter

Published: May 3, 2013 10:40 am ET
Updated: May 6, 2013 11:52 am ET

Related to this story

Topics Materials, Materials Suppliers

POINT COMFORT, TEXAS — Fourteen workers were injured May 2 in a fire at an ethylene purification unit operated by Formosa Plastics Corp. USA in Point Comfort.

Workers Steven Vasquez and Jose Campos were in critical condition May 3 at Memorial Hermann Texas Medical Center in Houston, a hospital spokeswoman said. Both men had been life-flighted to that location.

Formosa spokesman Steve Rice said May 3 that eight of the other 12 injured were treated and released from local hospitals. Most of the injured were treated for injuries ranging from serious burns to smoke inhalation, according to a report in the Victoria (Texas) Advocate.

The fire began around 1:30 p.m. and was extinguished by Formosa's in-house fire department within 10 minutes, Rice said, with an all-clear signal being given shortly after 3 p.m. The fire took place in an ethylene purification unit that is near a unit that makes high density polyethylene resin.

Rice said production has stopped at both the ethylene purification unit and the HDPE unit. No restart dates for those units has been announced. The cause of the fire is under investigation, he added.

"We're still assessing the situation and assessing damage," Rice said. "Our priority right now is tending to the injured."

Ken Mounger, vice president and general manager of the company's polyolefins division, said in a May 3 letter to customers: "It appears that there is no major damage to the production unit. The cause of this incident is under investigation and the restart date for the unit has not been determined.

"At this time there is sufficient product inventory to fill immediate normal and customary orders. The extent of our ability to supply product long term will depend on the results of the investigation and a full assessment of the equipment. Please rest assured that Formosa is working diligently to resume normal safe operations as soon as possible."

Point Comfort is Formosa's largest North American production site, making PE, polypropylene and PVC, as well as ethylene feedstock. It also was the site of an explosion and fire that injured 11 in 2005.

In February 2012, Formosa officials announced a $1.7 billion expansion project for Point Comfort. The expansion will include an olefins cracker with almost 1.8 billion pounds of annual capacity as well as a low density PE plant with almost 700 million pounds of annual capacity and a propane dehydrogenation (PDO) unit with more than 1.3 billion pounds of annual capacity.


Comments

14 workers injured in fire at Formosa Plastics

By Frank Esposito
Senior Staff Reporter

Published: May 3, 2013 10:40 am ET
Updated: May 6, 2013 11:52 am ET

Post Your Comments


Back to story


More stories

Image

Oxford Polymers adds compounding capacity

January 30, 2015 1:16 pm ET

Materials maker Oxford Polymers has increased its compounding capacity by installing a new single-screw extrusion line.    More

Image

Marval's next generation expands capacity

January 30, 2015 1:27 pm ET

MAMARONECK, N.Y. — There’s a lot of history at Marval Industries Inc., but the 59-year-old compounding firm also is looking toward the...    More

Image

Lubrizol buys Brazil-based coatings technology manufacturer

January 30, 2015 11:50 am ET

Specialty chemicals company Lubrizol Corp. of Wickliffe, Ohio, said it has acquired a Brazilian company that makes coatings technology for products...    More

Image

2014 sees modest sales increase, but profit decrease, for Dow Chemical

January 29, 2015 4:20 pm ET

UPDATED — Dow Chemical Co. delivered modest sales growth in 2014, but the firm's profit took a tumble.    More

Image

Resin prices continuing to tumble

January 29, 2015 2:24 pm ET

The ongoing slide in crude oil prices is taking commodity resin prices down as well.    More

Market Reports

Plastics in Automotive: Innovation & Emerging Trends

This special report newly released by PN and sponsored by The Conair Group examines current trends in the use of plastics in automotive, materials innovations and the changing landscape. It includes a review of legislative/regulatory activity impacting vehicle development and lightweighting, market opportunities & challenges for mold and toolmakers, innovative design strategies being implemented by major OEMs and suppliers, as well as a review of key indicators in Canada, Mexico, Brazil and China.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Upcoming Plastics News Events

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events