14 workers injured in fire at Formosa Plastics

By Frank Esposito
Senior Staff Reporter

Published: May 3, 2013 10:40 am ET
Updated: May 6, 2013 11:52 am ET

Related to this story

Topics Materials, Materials Suppliers

POINT COMFORT, TEXAS — Fourteen workers were injured May 2 in a fire at an ethylene purification unit operated by Formosa Plastics Corp. USA in Point Comfort.

Workers Steven Vasquez and Jose Campos were in critical condition May 3 at Memorial Hermann Texas Medical Center in Houston, a hospital spokeswoman said. Both men had been life-flighted to that location.

Formosa spokesman Steve Rice said May 3 that eight of the other 12 injured were treated and released from local hospitals. Most of the injured were treated for injuries ranging from serious burns to smoke inhalation, according to a report in the Victoria (Texas) Advocate.

The fire began around 1:30 p.m. and was extinguished by Formosa's in-house fire department within 10 minutes, Rice said, with an all-clear signal being given shortly after 3 p.m. The fire took place in an ethylene purification unit that is near a unit that makes high density polyethylene resin.

Rice said production has stopped at both the ethylene purification unit and the HDPE unit. No restart dates for those units has been announced. The cause of the fire is under investigation, he added.

"We're still assessing the situation and assessing damage," Rice said. "Our priority right now is tending to the injured."

Ken Mounger, vice president and general manager of the company's polyolefins division, said in a May 3 letter to customers: "It appears that there is no major damage to the production unit. The cause of this incident is under investigation and the restart date for the unit has not been determined.

"At this time there is sufficient product inventory to fill immediate normal and customary orders. The extent of our ability to supply product long term will depend on the results of the investigation and a full assessment of the equipment. Please rest assured that Formosa is working diligently to resume normal safe operations as soon as possible."

Point Comfort is Formosa's largest North American production site, making PE, polypropylene and PVC, as well as ethylene feedstock. It also was the site of an explosion and fire that injured 11 in 2005.

In February 2012, Formosa officials announced a $1.7 billion expansion project for Point Comfort. The expansion will include an olefins cracker with almost 1.8 billion pounds of annual capacity as well as a low density PE plant with almost 700 million pounds of annual capacity and a propane dehydrogenation (PDO) unit with more than 1.3 billion pounds of annual capacity.


Comments

14 workers injured in fire at Formosa Plastics

By Frank Esposito
Senior Staff Reporter

Published: May 3, 2013 10:40 am ET
Updated: May 6, 2013 11:52 am ET

Post Your Comments


Back to story


More stories

French firm acquires Zimmer-brand polymer technology

December 15, 2014 4:18 pm ET

The deal includes technologies for the processing of polyesters and nylons, and approximately 40 researchers and engineers.    More

Image

Bioplastics global production capacity

December 15, 2014 10:14 am ET

   More

Image

Israeli compounder building $13.1 million facility in North Carolina

December 12, 2014 1:14 pm ET

Tosaf USA, a subsidiary of Kfar Yona, Israel-based Tosaf Compounds Ltd., will build a compounding and masterbatch production facility in North...    More

Image

PPS resin maker Lumena cuts production after ‘difficulties’ with banks

December 12, 2014 11:47 am ET

Polyphenylene sulfide resin maker China Lumena New Materials Corp. said it’s having difficulty “maintaining the continual support”...    More

Image

Resin distributor Biesterfeld Plastic buys out partner in Biesterfeld Nordic

December 11, 2014 12:21 pm ET

Hamburg, Germany-based Biesterfeld Plastic GmbH, a distributor for the European plastic and rubber industry, announced that it has bought the shares o...    More

Market Reports

Flexible Packaging Trends in North America

Our latest RESEARCH report examines trends in FLEXIBLE PACKAGING impacting the North American market including a review of economic conditions, key drivers of growth, materials pricing, M&A activity, sustainability challenges and the outlook for 2015.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events