Machinery makes comeback in Ohio

By Bill Bregar
Senior Staff Reporter

Published: May 3, 2013 1:57 pm ET
Updated: May 3, 2013 2:55 pm ET

Image By: Rich Williams

Related to this story

Topics Machinery
Companies & Associations Milacron LLC, Sumitomo (SHI) Demag Plastics Machinery GmbH

Ohio is staging a mini-renaissance in plastics machinery. For industry veterans, it's great to see the state's machinery fortunes turn around.

The comeback is grounded in the resurgence of Milacron LLC in Batavia, Ohio, near Cincinnati, the only U.S. company to manufacture a broad line of primary equipment, including injection molding machines.

Less than a decade ago, Ohio was home to injection press manufacturing from Van Dorn in Strongsville, a suburb of Cleveland, and HPM in small-town Mount Gilead. Van Dorn and HPM both ended production. (Van Dorn did remain open for parts and service under its Japanese parent, Sumitomo (SHI) Demag, with a small workforce).

The Great Recession of 2009 seemed to hammer the final nail in the coffin. And the global economy hit hard, as injection press suppliers faced lots of auctions that dumped good, low-priced machines on the U.S. market.

But the global economy giveth, and taketh away. It is fitting that today's rebound in Ohio is aided by machinery companies in Japan and China.

The modest resurgence got juiced April 10, when Sumitomo Demag held a grand opening of a new technology center in Strongsville, housing seven injection molding machines making parts in a brightly lit area. Customers can do mold trials and take training classes at the facility, conveniently located right by the Ohio Turnpike.

On the other side of the wall is a major rebuilding department, to capitalize on the estimated 26,000 Van Dorn presses still running in North America. This is the building where hundreds of people toiled to build new Van Dorn presses for years. Now it employs 57, but it was good to see the operation buzzing with excitement once again.

Down in Marion, Ohio, one county over from Mount Gilead, HPM is showing new life thanks to China's Guangdong Yizumi Precision Machinery Co. Ltd. Yizumi bought HPM's intellectual property at an auction at the shuttered, hulking Mount Gilead factory. Yizumi wanted access to HPM's well-known name (dating way back to the apple-press days in the 1800s), and its die-casting equipment technology.

Now HPM North America Corp., led by long-time HPM executive William Flickinger, is delivering its first China-built

HPM injection molding machine, to fellow Buckeye State customer Pleasant Precision Inc.

HPM employs 12 people

The next Ohio machinery event comes May 9, when Absolute Haitian Corp. holds an open house at its new technical center in Parma Ohio, near Cleveland. The Worcester, Mass.-based company sells injection presses from Chinese powerhouse Haitian International Holdings Ltd.

The Parma center, which opened last year, houses parts and service personnel and a training center.

Of course, Milacron remains an important global company, with deep roots in Ohio. Milacron now employs more than 800 people in the main assembly plant in Batavia and a machining plant in nearby Mount Orab.

Milacron went through bankruptcy reorganization and layoffs in 2009. But the company has rehired lots of people. It supports new local training initiatives to help find the next generation of industrial workers —- serving as an example to U.S. manufacturing, which is seriously lagging in that area.

What's striking about the comebacks, especially Sumitomo Van Dorn and HPM, is the large number of long-term employees, many of them with 20 or more years of experience. They have been through the wars, seen the harsh global realities that killed once-proud names like New Britain, Reed-Prentice, Natco and Beloit. Most said goodbye in the 1970s and 1980s, and for awhile, it looked like the United States was becoming a deindustrialized nation.

But industry survived, and a smaller, tougher U.S. plastics sector is fighting back — an industry largely centered in the Midwest. And Ohio is right there, crossroads to a new future.

Bregar is a Plastics News senior reporter in Akron, Ohio.


Comments

Machinery makes comeback in Ohio

By Bill Bregar
Senior Staff Reporter

Published: May 3, 2013 1:57 pm ET
Updated: May 3, 2013 2:55 pm ET

Post Your Comments


Back to story


More stories

Image

Audacious vandal stuns Taipei Plas

September 29, 2014 4:59 pm ET

Melodrama erupted at the traditionally tranquil Taipei Plas trade show on Sept. 28 when a mysterious intruder flung red paint at the Baumüller...    More

Image

Shini pushes into western China

September 29, 2014 4:28 pm ET

Despite intellectual-property brigands, Taiwan's Shini Plastics Technologies Inc. is zestfully pursuing the enormous Chinese market for plastics...    More

Image

Global giant Foxconn to make, sell molding machines

September 26, 2014 2:48 pm ET

For years, Taiwan's Foxconn Technology Group has been the world's largest contract manufacturer for electronics, with more than 1 million employees...    More

Plastics Machinery Group now offering injection presses

September 26, 2014 10:46 am ET

Solon, Ohio-based Plastics Machinery Group is expanding its machinery offerings by adding injection molding machines to its inventory and adding a...    More

Image

Swiss thermoforming machinery firm WM Wrapping setting up US office

September 25, 2014 2:21 pm ET

Thermoforming industry veteran Kent Johansson has a new gig: Running a U.S. facility for Swiss sheet line and thermoforming machinery maker WM Wrappin...    More

Market Reports

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 million dollar plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our industry analysis highlights macro industry trends and micro trends faced by companies that do business in Mexico. The report also provides key industry statistics and forecasts to anticipate future industry expansion.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events