Three workers still hospitalized after Formosa Plastics fire

By Frank Esposito
Senior Staff Reporter

Published: May 7, 2013 11:12 am ET
Updated: May 10, 2013 12:14 pm ET

Related to this story

Topics Materials Materials Suppliers
Companies & Associations

LIVINGSTON, N.J. -- Three workers remained hospitalized May 10 after a May 2 fire at a plastics feedstock unit operated by Formosa Plastics Corp. USA in Point Comfort, Texas. The company has declared force majeure on some grades of high density polyethylene as a result of the fire.

A spokeswoman for Memorial Hermann Texas Medical Center in Houston confirmed on May 9 that worker Jose Campos remained in the hospital in critical condition. Two of those still hospitalized were contractors, while the third was a Formosa employee, according to a spokesman with Livingston, N.J.-based Formosa. He declined to provide further details.

Eleven other workers who were injured in the fire have been treated and released from local hospitals. The ethylene purification unit where the fire broke out and a nearby polyethylene unit remained down May 10. The cause of the fire is being investigated and no restart date has been set, officials said.

As a result of the PE unit being down, Formosa on May 6 declared force majeure on high-molecular-weight grades of its Formolene-brand high density PE resins. The quantity of product that will be allocated to customers is under evaluation, polyolefins Vice President and General Manager Ken Mounger said in a May 6 letter. Officials previously said that the firm has sufficient PE inventory to meet normal orders.

The purification unit was not operating at the time of the fire, officials said. Maintenance was being conducted on equipment in and around the area, they added. Formosa’s in-house fire department had the fire extinguished within 10 minutes.

Officials also said that the mandated use of fire-resistant clothing may have reduced the amount and severity of some of the injuries, and that the employees’ training and drills “proved their effectiveness.”

“Everyone knew exactly what to do and who was responsible,” officials said in the release. “Response was immediate and the on-site medical treatment center was set up and staffed within minutes of the incident.

“We continue to work with the injured, and their families, to ensure prompt, proper medical treatment and assist with the families’ needs during this difficult time,” the release added.

Officials also said that although it appeared that some ancillary equipment was damaged by the fire, there appeared to be no significant damage to production equipment.

 Point Comfort is Formosa’s largest North American production site, making PE, polypropylene and PVC, as well as ethylene feedstock.

Point Comfort also was the site of an explosion and fire that injured 11 in 2005. That fire started when a contract employee backed a forklift into a liquid propylene line, causing the propylene to vaporize and ignite. The site’s olefins unit was down for five months as a result of that incident.

In February 2012, Formosa officials announced a $1.7 billion expansion project for Point Comfort. The expansion will include an olefins cracker with almost 1.8 billion pounds of annual capacity, as well as a low density PE plant with almost 700 million pounds of capacity, and a propane dehydrogenation unit with more than 1.3 billion pounds of capacity.


Comments

Three workers still hospitalized after Formosa Plastics fire

By Frank Esposito
Senior Staff Reporter

Published: May 7, 2013 11:12 am ET
Updated: May 10, 2013 12:14 pm ET

Post Your Comments


Back to story


More stories

Image

Ford moving forward in carbon fiber for 'high volume' use

April 17, 2015 10:21 am ET

Ford Motor Co. has signed a deal with a carbon-fiber manufacturer to jointly explore “high-volume” automotive uses for the lightweight...    More

Image

Force majeure declared at six European sites since mid-March

April 17, 2015 1:10 pm ET

At least six European resin makers have declared force majeure on polyethylene, polypropylene and related products since mid-March, leading to higher ...    More

Image

Executives step down from Star Thermoplastics

April 17, 2015 12:56 pm ET

Executives Randall Fortin and Larry Johnson no longer are with materials firm Star Thermoplastics Alloys & Rubbers Inc.    More

Image

Zoltek expanding CF capacity in Europe

April 17, 2015 10:12 am ET

Leading carbon fiber group Zoltek Corp. has signed a strategic agreement with the Hungarian government to expand its operation in northern Hungary,...    More

Image

Hanwha Azdel adds capacity in Lynchburg

April 16, 2015 2:01 pm ET

Composite maker Hanwha Azdel Inc. will add space and a new production line at its Lynchburg, Va., production facility, the company announced April 16.    More

Market Reports

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molding Market Analysis & Processor Rankings

Plastics News BUNDLED package contains our in-depth Market Analysis of the Injection Molding segment. You will gain keen insight on current trends and our economic outlook.

As a BONUS this includes PN's updated 2014 database of North American Injection Molders RANKED by sales volume. Sort, merge, mail & prospect by end market, materials processed, region, # of plants and more.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events