Supply issues impact Chevron Phillips and Formosa polyethylene plants

By Frank Esposito
Senior Staff Reporter

Published: May 15, 2013 1:42 pm ET
Updated: May 16, 2013 1:24 pm ET

Related to this story

Topics Materials Materials Suppliers
Companies & Associations Chevron Phillips Chemical Co. LP

AKRON, OHIO — Production and supply issues continue to impact polyethylene plants operated by Formosa Plastics Corp. USA and Chevron Phillips Chemical Co. in Texas.

Officials with Livingston, N.J.-based Formosa confirmed on May 15 the restart of two of three high density PE lines that had been down since a May 2 fire at its plant in Point Comfort, Texas. Those lines represent about 70 percent of the unit's output, they added.

The third line is expected to be up and running in late June, officials said. Two workers remain hospitalized — both contract workers — from injuries sustained in the fire. Force majeure conditions remain in place for high molecular-weight bimodal grades of Formosa's Formolene-brand HDPE.

"The quantity of product that will be allocated for the month of June is under evaluation," polyolefins vice president and general manager Ken Mounger said in a May 14 letter to customers. "We understand the burden that this ongoing production interruption has placed on [customers]. Formosa is making every effort to return to normal operations as soon as possible."

But just as Formosa was bringing some of its PE capacity back, Chevron Phillips Chemical Co. — based in The Woodlands, Texas — was declaring force majeure on PE because of a minor emissions event at its Cedar Bayou plant in Baytown, Texas.

According to a report filed with the Texas Commission on Environmental Quality (TCEQ), more than 260 pounds of hexene, almost 150 pounds of pentane and three pounds of gaseous ethylene were released from the plant between 11:30 p.m. on May 9 and 3 a.m. on May 10.

The cause of the air emissions event was listed as an incinerator shutdown, which resulted in process degasser streams being routed from the incinerator to the atmosphere.

The PE force majeure was confirmed in a May 14 customer letter obtained by Plastics News. In the letter, Chevron Phillips PE vice president David Morgan said that the firm "has experienced a contingency event and is in a force majeure situation with respect to [Chevron Phillips'] polyethylene supply."

Chevron Phillips "will work diligently to minimize the impact of this event on your business and return to full polyethylene deliveries as soon as possible." Officials with the firm declined to comment on the TCEQ filing.

Chevron Phillips ranks as one of North America's largest HDPE makers with annual capacity estimated at almost 3.5 billion pounds. The firm also operates almost 1.9 billion pounds of linear low density PE capacity and 620 million pounds of annual capacity for low density PE. In addition to Baytown, Chevron Phillips also makes PE at plants in Pasadena and Orange, Texas.


Comments

Supply issues impact Chevron Phillips and Formosa polyethylene plants

By Frank Esposito
Senior Staff Reporter

Published: May 15, 2013 1:42 pm ET
Updated: May 16, 2013 1:24 pm ET

Post Your Comments


Back to story


More stories

Image

Resin prices remain unpredictable

April 27, 2015 12:23 pm ET

Oil prices leveled off a bit in March, but North American commodity resin prices remained as unpredictable as ever.    More

Image

Dow Chemical bullish about prospect for global polyurethane markets

April 27, 2015 11:17 am ET

MAASTRICHT, THE NETHERLANDS — Glenn Wright, president of Dow Chemical Co.’s polyurethanes and formulated systems business, revealed that...    More

Image

PolyOne launches Geon BIO PVC using soy-based materials

April 24, 2015 11:48 am ET

More than a decade of research is paying off for Battelle Memorial Institute in the form of Geon BIO PVC compounds from PolyOne Corp.    More

Image

Study suggests infants at lower risk from BPA exposure than expected

April 23, 2015 4:58 pm ET

A new study shows that newborn babies may have less risk from bisphenol A exposure than originally thought.    More

Image

Braskem and Odebrecht reconsidering West Virginia plastics project

April 23, 2015 2:54 pm ET

Brazilian firms Braskem and Odebrecht have confirmed that they are re-evaluating Project Ascent, the major plastics and petrochemicals project they ha...    More

Market Reports

North American Thermoformed Packaging Market Outlook & Review 2015

Our annual report provides a thorough review and analysis of economic and political conditions, emerging market trends, packaging design advances, materials pricing and sustainable packaging issues impacting supply and demand in the TP segment. Our analysts identify key drivers of growth and opportunities for processors to remain competitive in the years ahead through innovation, production efficiencies and more.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics Caps & Closures Market Report

The annual recap of top trends and future outlook for the plastics caps & closures market features interviews with industry thought leaders and Bill Wood’s economic forecast of trends in growing end markets. You will also gain insight on trends in caps design, materials, machinery, molds & tooling and reviews of mergers & acquisitions.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 15, 2015 - September 17, 2015Plastics Caps & Closures - September 2015

More Events