Analyst: North American mold makers need to expand

By Rhoda Miel
News Editor

Published: May 15, 2013 10:59 am ET
Updated: May 15, 2013 11:27 am ET

Image By: University of Windsor Dennis DesRosiers

Related to this story

Topics Education & Training, Workforce, Automotive, Molds/Tooling

MISSISSAUGA, ONTARIO — Before the auto slowdown that saw two carmakers file for bankruptcy, the North American auto industry launched about 40 all-new vehicle models each year.

This year, it will introduce 74. And for the next five years, auto industry watchers expect about 70 new vehicles each year — not just refreshed models, auto analyst Dennis DesRosiers told members of the Canadian Association of Mold Makers during a May 14 meeting in Mississauga — but all new models.

Each one of those new models will need new molds for all-new interiors, new body moldings, new fascia, new lighting, new electronics and new under-the-hood parts. That means a lot of work that will be up for bids to North American toolmakers. Currently, automakers are sourcing about 85 percent of their molds in North America.

“Logistics say that you’re facing the biggest demand for your products in history,” said DeRosiers, the founder of DesRosiers Automotive Consultants Inc. of Richmond Hill, Ontario.

Beyond preparing for sheer numbers of new business, DesRosiers said, mold makers should be bringing their staffing numbers back up so they’re ready for a continued surge in demand for products.

“Now is the time to hire those young workers who are going to need three to five years to develop so you’re prepared,” he said. “Take risks.”

DesRosiers said the labor surveys in Canada show that the machining, tool and die industry is nowhere near the employment level it should be to take advantage of the automotive growth. In 2006, Statistics Canada counted 27,626 workers in the tool, die and machining field. In 2010, there were 18,597.

By 2012, the employment base had grown to about 19,800 workers — still about 8,000 workers shy of where the industry had been.

“This industry is on fire, and you’ve only picked up about 1,000 workers,” he said. “Employee numbers are gutted, and I don’t know you’re going to get it back.”

While improved automation and technology — along with retirements — explains some of the staffing shortfall, it still indicates that the Canadian tooling industry as a whole is missing out on a resurging auto market and will continue to lose potential business in the future.

Work will go to toolmakers in the U.S. and Mexico if Canadian mold makers are not ready.

DesRosiers said he doesn’t buy into complaints that the education system is failing to prepare young workers for skilled trades.

“For 40 years, I’ve been hearing the same complaints about problems finding young workers,” he said. “I think that’s just an easy excuse.”

During the same meeting, Cy McGrath, a CAMM director who is also active in a support group for the Canadian military, introduced a new initiative looking to link tool and mold shops with veterans who are about to leave full-time military life and seeking jobs.

About 5,000 members of the Canadian armed forces will leave active duty this year, McGrath said. The Helping Integrate Regs and Reserves Program recently launched within Delta Company, the civilian support arm of the Essex and Kent Scottish Regiment reserve army unit.

Employers can post job openings through the HIRE program, while veterans can submit their resumes. Delta Company hopes to encourage other groups and companies to participate in the program, McGrath said.


Comments

Analyst: North American mold makers need to expand

By Rhoda Miel
News Editor

Published: May 15, 2013 10:59 am ET
Updated: May 15, 2013 11:27 am ET

Post Your Comments


Back to story


More stories

Image

Best Places To Work: No. 4, Ayanna Plastics & Engineering Inc.

March 3, 2015 2:39 pm ET

Ayanna Plastics & Engineering Inc., a Clearwater, Fla., injection molder and toolmaker, ranks No. 4 on the Plastics News Best Places to Work list....    More

Image

Toyota says Mirai fuel cell sedan represents a 'new start' for the carmaker

March 2, 2015 11:55 am ET

Toyota Motor Corp.'s most advanced vehicle, a car that runs on hydrogen and emits only water, has had an ironically low-tech birth and has an equally ...    More

Image

Plastic Omnium makes China investment push

February 26, 2015 4:35 pm ET

Three of the six new plants that automotive molder Plastic Omnium SA plans this year will be in China, part of a broader push it’s making in...    More

Image

Finding good workers isn't always about technical skills

February 26, 2015 1:09 pm ET

Business boils down to people. Men and women are employed making things that are bought by people. Pretty simple. But now there's another people...    More

Image

Making personal connections can improve leadership skills

February 24, 2015 1:22 pm ET

LAKE LAS VEGAS, NEV. — When sizing up people you first meet — whether it's a coworker, a boss or a blind date — what do you notice f...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events