China’s ‘Green Fence’ makes unprecedented cuts in recycled plastic imports

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: May 19, 2013 2:35 pm ET
Updated: May 19, 2013 2:38 pm ET

Related to this story

Topics Sustainability, Recycling, Materials Suppliers, CHINAPLAS

GUANGZHOU, CHINA -- China’s “Green Fence” crackdown on dirty scrap materials has reduced imports of plastic waste by 5.5 percent in the first four months of the year, a significant change for a country long-used to double-digit increases in recycled materials flowing in.

Imports of scrap plastic bound for recycling factories in the country fell to 2.4 million metric tons from January through April, after the Chinese government in February started implementing what recycling industry officials say is the toughest crackdown yet on imports of scrap materials.

The disclosure of the 5.5 percent drop, in figures provided by China’s General Administration of Customs at a mid-May conference in Guangzhou, is one of the first statistical indications that the Green Fence policy is having a big impact on the industry.

While that drop may sound small, it’s a major change in direction for an industry that has seen scrap polymer imports grow four-fold in the last decade and was accustomed to nothing but increasing volumes.

Chinese government officials say they are trying to limit pollution from dirty or contaminated waste materials such as scrap paper or plastics from other countries, and see the policy as a way to force the local industry to upgrade to higher, cleaner standards.

But some recycling industry executives, while supporting those goals, say the policies are also hurting legitimate businesses by causing long delays clearing materials at customs, creating shortages of materials in manufacturing plants, and cutting into profits.

Speaking at a meeting of Chinese plastics recyclers in Guangzhou May 18-19, Chinese government representatives said they plan to continue the “Green Fence” operation through October or November.

The next phases will include exerting tighter control over the limited number of licenses issued to import scrap materials in China, including the practice of companies selling licenses, government officials said at the conference, sponsored by the Beijing-based China Scrap Plastics Association conference.

Steve Wong, executive chairman of the CSPA and chief executive officer of Hong Kong-based recycler Fukutomi Co. Ltd., said that the crackdown is the most serious in China yet.

It’s not a result of new law but rather much stricter enforcement of existing laws, he said.

China has had other crackdowns over the last few years, including a more localized one that saw scrap plastic imports through the port of Guangzhou, one of China’s largest for recycled materials, drop 52 percent in the first half of 2012.

Other ports in the country at the time reported an increase in scrap plastic imports, as shipments were rerouted, but the new Chinese government figures point to the tighter policies being applied country-wide.

Wong said this particular initiative is more serious because it’s part of a package of environmental policies supported by the country’s top leaders, including current President Xi Jinping.

He said for Fukotomi, imports of scrap plastic have dropped 30 percent, and some companies at the conference pointed to similar drops for them.

But for other companies, the policies are proving beneficial.

Ni-Met Metals and Minerals Inc., an Oakville, Ontario-based recycler, said it’s seeing increased demand from its customers in China because of Green Fence and the resulting shortage of materials there.

The company has always only supplied materials that clearly meet Chinese standards, so it’s had no problems clearing customs, said Rajiv Shah, vice president of plastics with the company.

“We’ve had a philosophy of behaving in a socially-responsible manner and that is paying off now,” said Shah, in an interview at his company’s booth at the show.

Customs officials said they see the policy as helping the industry upgrade.

“This Green Fence is like a purification which will facilitate the further development of this industry,” said Lu Xi Sen, an official with the Tianjin office of China’s customs administration.

One recycler, speaking on condition of anonymity, said the policy had a dramatic impact on the company in February, when it was unable to get any materials to its factory in eastern Guangdong province.

But the company, which does not have a license to import materials directly, found a solution that works around the limits.

It buys its material from a factory that has that license, and while that practice may not be legal because factories with licenses are supposed to recycle all the material they import themselves, it’s becoming a common solution, the manager said.

“Everyone is doing like this,” the manager said. “Maybe some huge factory is not but most of the small factories do this.”

He said part of the problem is that the government limits the number of licenses, and getting one can be difficult and require political connections, creating incentives for corruption.


Comments

China’s ‘Green Fence’ makes unprecedented cuts in recycled plastic imports

By Steve Toloken
Staff Reporter / Asia Bureau Chief

Published: May 19, 2013 2:35 pm ET
Updated: May 19, 2013 2:38 pm ET

Post Your Comments


Back to story


More stories

Image

China's PVC exports face challenges

August 22, 2014 2:14 pm ET

Despite robust growth in the first half of the year, China's PVC exports now faces new challenges, due to trade barriers and new capacity ramping up...    More

Image

Composite bridge maker also leading the way in installation

August 22, 2014 1:21 pm ET

Lightweight, low maintenance and strong, fiber-reinforced polymer (FRP) bridge decks finally are crossing the line from specialty projects to wider...    More

Image

Recycled HDPE prices climbing

August 22, 2014 11:26 am ET

North American selling prices for recycled grades of high density polyethylene resin have increased in recent months because of tight supplies of the ...    More

Image

Non-recyclable items gumming up the works at recycling centers

August 21, 2014 3:46 pm ET

The influx of all sorts of unacceptable items at recycling centers has gotten to the point that Charlotte, N.C.-based ReCommunity is trying to bring...    More

Image

Bayer, SCAC partner on water reuse project

August 21, 2014 12:48 pm ET

Bayer MaterialScience (BMS) and Shanghai Chlor-Alkali Chemical Co. Ltd. (SCAC) have entered into a preliminary agreement for the reuse of waste water ...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report analyzes economic and market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as growth strategies being implemented by thermoformed packaging companies.

Learn more

Pipe, Profile & Tubing Extrusion in North America 2014

U.S. demand for extruded plastics is expected to grow by 3 percent in 2014, with PVC remaining the largest segment.

Plastic pipe will post the strongest gains through 2018, continuing to take market share from competing materials in a range of markets.

Our latest market report provides in-depth analysis of current trends and their financial impact on the pipe, profile and tubing extrusion industry in North America.

Learn more

2014 Injection Molding Industry Report

GROWTH, OPPORTUNITY IN SIGHT FOR INJECTION MOLDERS IN 2014

In the wake of the economic turbulence earlier in this decade, molders today find themselves in much better shape. Molders are gaining a competitive advantage by investing in people, equipment and seeking inroads into new markets on a global scale.

Growth in the injection molding industry is going to be driven by low financing costs and a continued move to reshore some business.

Learn more

Upcoming Plastics News Events

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

More Events