Medical-device OEMs look to the long run

By Gayle S. Putrich
Staff Reporter

Published: May 21, 2013 1:02 pm ET
Updated: May 21, 2013 1:09 pm ET

Image By: Plastics News photo by David M. Barron/oxygengroup Matt Jennings, left, president and CEO of Phillips-Medisize, with Dave Daum, senior director of global sourcing for Philips Respironics' Home Healthcare Solutions business.

Related to this story

Topics Medical, Injection Molding, Plastics in Medical Devices

BOSTON — As the global health-care market continues to grow by nearly exponential rates, industry leaders are looking to move the U.S. medical-device business forward by redefining the relationships of original equipment manufacturers and their suppliers.

Although economies around the world stalled in the last few years, it has not stopped their populations from getting older. The aging baby boomer generation in the U.S. and Europe, and the burgeoning middle class in developing countries like Brazil, India and China, are causing not just a general increase in demand for medical devices, but demand for innovative devices at the lowest possible cost, said industry leaders at the Plastics in Medical Devices conference, held May 13-15 in Boston.

"Innovation today has a new definition," said Randy Barko, president and CEO of Ximedica LLC, which provides product development services to medical-device makers and health-care companies. "It has to be something that's reducing costs out of the health-care delivery system. It doesn't necessarily mean it's the device." Innovation could come in the way the device is used, rather than a redesign, he said, or even in the way it is made.

The push for bottom-line cost reduction has been made even more difficult and more imperative by the advent of the 2.3 percent tax on total sales of medical devices — part of the 2010 Affordable Care Act potentially. That tax is driving up per-unit prices. With materials costs bottoming out now, on average at 40 percent of the total cost, the old-fashioned way of driving down material prices with negotiation is not sustainable, said Mike Kelly vice president of operations for Boston Scientific Corp. So supplier help on the design side is emerging as the new way to drive down total costs while coming up with ever-smarter devices and building new, long-term OEM-supplier relationships, he said.

"The suppliers that are going to be with us for the long run are going be very innovative and help us with the design chain, not just the supply chain," Kelly said.

Earlier and earlier involvement of suppliers in the design effort, whether designing a new device or making changes to an existing one, is going from a trend to a permanent way of doing business, said Matt Jennings, president and CEO of Phillips-Medisize Corp., based in Hudson, Wis.

The trend makes for a more holistic start-to-finish approach for the OEM, Jennings said, while giving suppliers a new look at a manufacturing process and a better understanding of their products' place in it. "It's a real opportunity for the supply base to understand where the bottlenecks are and where they can help," he said.

Closer OEM-supplier partnerships that result in a nimble business process and flexible product will help U.S.-based companies compete in the shifting global health-care market, said Dave Daum, senior director of global health-care solutions for Philips Respironics of Murrysville, Pa., just outside Pittsburgh. The Philips Electronics NV division makes innovative sleep and respiratory-care devices.

"We're really seeing we're in a global environment now," Daum said. "Other countries are developing devices U.S. companies thought they had a lock on, and we're seeing slow infiltration into U.S. market."

OEMs, some for the first time, are finding they have to compete in the local and global market, Barko said. And in a global economy, "local" means Boston, Ireland, Costa Rica and China, even for a U.S.-based company.

"You have to be local to service the customers locally," Barko said. His Providence, R.I.-based firm, Ximedica, is moving its Hong Kong headquarters to the Hong Kong Science and Technology Park, in part to be closer to collaborators and partners — making it easier to involve them in Ximedica's design and production process from start to finish.

"A lot of 'good enough' product is about to be coming out of China," he said. "It's up to us to take on that challenge and deliver."


Comments

Medical-device OEMs look to the long run

By Gayle S. Putrich
Staff Reporter

Published: May 21, 2013 1:02 pm ET
Updated: May 21, 2013 1:09 pm ET

Post Your Comments


Back to story


More stories

Image

Cambro investing $30.4 million in new N.C. injection molding plant

April 18, 2014 2:36 pm ET

Foodservice products manufacturer Cambro Manufacturing Co. Inc. plans to set up a satellite production and distribution operation in Mebane, N.C., to ...    More

Image

Producers urge booming Brazilian housing market to use EPS

April 18, 2014 1:08 pm ET

Leaders in Brazil's plastics industry are asking lawmakers to mandate the use of expandable polystyrene (the raw material for expanded EPS) in new...    More

Image

Increased orders prompt Georg Utz to add capacity, equipment in Indiana

April 18, 2014 12:20 pm ET

Plastic totes and tray orders have picked up to the point where manufacturer Georg Utz Inc. has added machines, silos and material feed systems to...    More

MGS buying N.Y. medical molding plant from Hospira

April 17, 2014 10:19 pm ET

MGS Manufacturing Group is purchasing the Buffalo, N.Y., injection molding facility and related product line of Hospira Inc., effective July 1. Terms ...    More

Image

Navigating the rough seas of selling your company

April 17, 2014 2:47 pm ET

For family owned plastics firms who survived the Great Recession, many wonder: Is it time to sell, retire and sip cocktails on the beach? Or, maybe fi...    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events