Prime Plastic pursues scrap for recycling

By Frank Esposito
Senior Staff Reporter

Published: May 23, 2013 3:15 pm ET
Updated: May 23, 2013 3:20 pm ET

Image By: Plastics News Vince Gupta

Related to this story

Topics Sustainability, Recycling

VISTA, CALIF. — Prime Plastic Products Inc. is not waiting for recycling sources to show up — it's going to them.

The Vista, Calif.-based recycling firm already has grinding units in place at three processors' locations and plans to have two more installed by the end of the year. The firm now generates about half of its recycling volume from units in place at those existing locations.

"Sourcing is the 800-pound gorilla in the room," Prime owner and founder Vince Gupta said in a recent phone interview. "We realized we could have one facility in one part of the country, but the country is so large and there's [plastic] scrap everywhere. You'd be depending on one geographic area to feed a plant."

Grinders could be installed with processors "for limited capital investment, once you were able to develop relationships with customers," he added. "And some were willing because you're saving them money."

Prime purchases and installs the grinders, then gathers the material and distributes it directly from those sites to other customers, most of which are in the Midwest. This approach saves the step of taking the material to a central warehouse location. The only warehouse owned by the firm is a 35,00-square-foot location in Maywood, near Los Angeles. That site also operates two grinders.

Gupta provided some detail on the firms where Prime has grinders in place, but he declined to identify them by name, citing confidentiality agreements. The Iowa firm is a toll grinder, while the North Carolina firm is an injection molder and the client in Missouri is a profile extruder.

Looking ahead, Gupta said he'd like Prime to do more sourcing business with toll grinders and smaller grocery chains, such as those with fewer than 100 locations. Prime potentially could install baling equipment at grocery stores to assist in the supply process.

Prime has found a niche by staying away from the bottle and film recycling that's done by many other recyclers, Gupta said. Instead, the firm has focused on recycling "big bulk rigids" such as pallets, totes, jugs, bins and drums. Most of these products are made from commodity resins, such as polyethylene and poly¬propylene.

In his native India, Gupta's family was involved in injection molding and other types of plastics processing. He moved to the U.S. in the early 1990s to attend Eastern Michigan University, where he earned a plastics engineering degree.

After graduating, Gupta worked for a couple of materials companies in Michigan before moving to California and going out on his own in the late 1990s. Prime now employs 10, with Gupta planning to hire three to five more people by the end of the year to work in sourcing.

Prime processes between 50 million and 60 million pounds of recycled resin per year, with a goal of reaching 100 million pounds, Gupta said. The firm posted sales of $12 million in 2012 and expects that amount to increase to $15-18 million this year.

Interest in using recycled-content plastics is growing in a number of markets, according to Gupta. "It's a happy blend," he said. "Big companies want to save money [by using recycled content] because of resin costs, and it also appeals to customers by allowing them to say that their product is a green product.

"The most positive thing about plastics recycling is that the material really has value now," Gupta added. Scrap plastic "used to be given away for free or for 1 cent per pound. Now, demand is up and supply hasn't kept pace."

After 15 years in business, Gupta said he's proud of what Prime has accomplished in the recycling market.

"We're debt-free and we've distinguished ourselves by not growing out of proportion just to chase volume," he said.


Comments

Prime Plastic pursues scrap for recycling

By Frank Esposito
Senior Staff Reporter

Published: May 23, 2013 3:15 pm ET
Updated: May 23, 2013 3:20 pm ET

Post Your Comments


Back to story


More stories

Dutch company launching $100 million PP, PE recycling plant

April 18, 2014 10:42 am ET

Quality Circular Polymers is building a new plastics recycling operation in Geleen, the Netherlands' Chemelot industrial chemical site, with a...    More

EU moving closer to rules that will reduce plastic bag use by 80 percent

April 17, 2014 10:54 am ET

European Union countries could have to reduce the use of plastic shopping bags by at least 80 percent by 2019 under draft rules backed by the...    More

With European Parliament vote looming, official urges bag restriction

April 16, 2014 9:56 am ET

Janez Potocnik, Europe's commissioner for the environment, told the European Parliament April 15 that plastic shopping bags are a “highly...    More

Image

Austria's Greiner building a foothold in the US rigid packaging market

April 15, 2014 1:22 pm ET

Greiner Packaging International GmbH, one of Europe's largest makers of rigid plastic packaging, now wants to make its mark in the United States.    More

Image

SodaStream turns to PET for its new pre-measured flavor 'Caps'

April 15, 2014 1:40 pm ET

SodaStream International Ltd., maker of home beverage carbonation systems, is using plastic to bring more flexibility to its consumers.    More

Market Reports

Thermoformed Packaging 2014 Market Review & Outlook North America

This in-depth report provides analysis and discussions of economic and political conditions, market trends, legislative/regulatory activity impacting supply and demand, business opportunities and threats, materials pricing, manufacturing technology, as well as strategies being implemented by thermoformed packaging companies. In addition, there are reviews of 25 leading thermoformers in the packaging segment, assessing their growth initiatives and performance metrics over 10 years.

Learn more

Automotive Market Review and Outlook 2014 The Americas

This 75-page report features in-depth analysis of the automotive industry for the Americas. It includes discussions of market trends, legislative/regulatory activity impacting production and threats as well as design strategies being implemented by the major automakers. Detailed charts and data tables outline North American automotive production over the last five years.

Learn more

Plastics Building & Construction Market Review and Outlook 2014 with MS Excel chart data

This report provides in-depth analysis of the plastic building and construction market for North America, including discussions of trends, opportunities, threats and the latest developments in construction trends that impact plastics processors.

Learn more

Upcoming Plastics News Events

May 6, 2014 - May 8, 2014Plastics in Medical Devices 2014

May 12, 2014 - May 12, 2014Plastics News Brazil Pharma Summit

September 10, 2014 - September 12, 2014Plastics Caps & Closures 2014

February 3, 2015 - February 7, 2015Plastics News Executive Forum 2015

More Events