Baxter the robot wows conference audience

By Bill Bregar
Senior Staff Reporter

Published: May 24, 2013 2:59 pm ET
Updated: May 24, 2013 3:08 pm ET

Baxer the robot

Image By: Plastics News photo by Bill Bregar If something goes awry during operation, Baxter can express his confusion.

Related to this story

Topics Machinery

ERIE, PA. — Baxter the robot wowed attendees May 23 at Penn State Erie's Injection Molding Conference.

Mark Proud Jr., vice president of Baxter distributor Proud Co., ran Baxter through its paces, demonstrating how the two-armed robot can pick up plastic parts and move them around, stack them or put them in a box. He showed how a simple control on one of the robot's arms changes the functions, which include teaching, a history of tasks and operation.

"We want to put the power of robots into the hands of people who have never had an experience with robots," Proud said, adding that Baxter is good for "very mundane, remedial repetitive tasks."

Baxter, made by Boston-based Rethink Robotics Inc., can work side-by-side with people, with no need for special safety guarding. Sonar detects if someone is nearby, and Baxter's computer-screen face turns to see.

If something goes wrong during operation — say, for example, Baxter can't find any parts to grab or someone grabs a part out of its gripper — the face gives a confused look and a red light flashes.

Proud said Baxter's camera-equipped arms each have a payload of 5 pounds. The arms can coordinate, but they can't work together to lift one thing, like a box of parts — so far.

"What Baxter can do tomorrow and what it can do today are two different things," Proud said.

One conference attendee, Per Flem, president of Recto Molded Products Inc., said Baxter already made a sales call at his custom molding plant May 21 in Cincinnati. A representative from a nearby robot firm stopped by. "They wheeled it out of a trailer. They brought it right into the plant," he said.

Flem said he's itching to buy one. "The technology is really incredible, but it has a very finite application," he said. "It isn't as fast as one would like. Finding the right application is the key to its adoption."


Comments

Baxter the robot wows conference audience

By Bill Bregar
Senior Staff Reporter

Published: May 24, 2013 2:59 pm ET
Updated: May 24, 2013 3:08 pm ET

Post Your Comments


Back to story


More stories

Image

Small is beautiful in Nissei's newest press

November 21, 2014 2:14 pm ET

Responding to customer demand for flexibility, Japanese plastics-equipment manufacturer Nissei Plastic Industrial Co. Ltd. is demoing a caster-...    More

Image

Cartoonist Rich Williams: If I could make HDPE funny, my powers would be limitless

November 21, 2014 1:41 pm ET

For the past 25 years, Rich Williams has been a fixture in the Plastics News staff box, and on our editorial page. Rich “speaks” to our...    More

Image

Three advancements have driven injection molding technology

November 21, 2014 6:00 am ET

Injection molding technology has made major advances in the last 25 years, from largely a world of shoot-and-ship to doing as much as possible at the ...    More

Image

Renners leaving Sumitomo (SHI) Demag

November 21, 2014 10:01 am ET

Christian Renners is leaving injection molding press manufacturer Sumitomo (SHI) Demag Plastics Machinery GmbH, the company announced Nov. 21.    More

Image

Netstal, Electra Form team up for PET preform partnership

November 20, 2014 3:15 pm ET

The Netstal division of Krauss-Maffei Corp. is teaming up with Electra Form Industries in a partnership to offer PET preform machines and molds as a p...    More

Market Reports

Plastics in Brazil - State of the Industry Report

This in-depth report examines the Brazilian plastics industry from a historical and geographical context. Our analysts provide insight on economic trends and forecasts, growing manufacturing sectors that utilize plastics, private investment opportunities, market environment challenges, and innovations in R&D.

Data tables and charts on producer prices, trade, plastics production and end market indicators is also included.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Injection Molders Market Report & Ranking 2014

This special package contains our 132-page 2014 Market Report on the Injection Molding segment and our exclusive 2014 RANKINGS database of 500+ Injection Molders for a discounted package price.

Learn more

Upcoming Plastics News Events

January 14, 2015 - January 14, 2015Plastics in Automotive

February 4, 2015 - February 6, 2015Plastics News Executive Forum 2015

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

October 27, 2015 - October 29, 2015Plastics Financial Summit - New York - 2015

More Events