Illinois thermoformer TEQ invests $6 million in upgrades and infrastructure

By Roger Renstrom
Correspondent

Published: May 27, 2013 10:09 am ET
Updated: May 27, 2013 10:12 am ET

Related to this story

Topics Sustainability Packaging Thermoforming
Companies & Associations

Thermoform Engineered Quality LLC in Huntley, Ill., has invested more than $6 million for new equipment, another clean room and an eco-roof.

President Randall Loga said the upgrades in machinery and infrastructure will enable the custom thermoformer to better serve medical device and packaging customers, and also keep pace with changes in the industry’s quality and safety requirements.

TEQ has ordered four custom-designed all-electric servo motor-driven Speedformer-brand pressure formers — a KMD85 and three KMD78s — from Kiefel Technologies Inc. of Hampton, N.H., a business unit of Brückner Technology Holding GmbH.

TEQ expects to begin operating the automated machines with advanced process and material control features by late July. TEQ is selling three older Kiefel formers and a Sencorp.

Huntair Inc. of Tualatin, Ore., has installed two Class 8 Servicor-brand modular clean rooms in Huntley. TEQ’s recently opened second clean room occupies 2,000 square feet and has two pressure forming lines. Operations began in 2010 in a 3,000-square-foot clean room that houses four lines. Huntair is a subsidiary of the CES Group LLC unit of Nortek Inc.

In an energy-saving move completed in August, TEQ installed a highly reflective white Uniflex-brand elastomeric roof coating from the consumer group of Cleveland-based Sherwin-Williams Co. through its Lake in the Hills, Ill., store. “We believe we are seeing 15 percent savings in cooling costs,” said Todd McDonald, TEQ director of sales and marketing.

For a program generating major growth, TEQ supplies an unidentified U.S. company with disposable probe covers of specially formulated polypropylene for the ThermoScan-brand infrared ear thermometer.

Over two years, TEQ has thermoformed more than 2 billion of the covers with zero defects in the field, McDonald said.

A five-year contract was signed in August 2009 with TEQ projecting program sales of $40 million. The effort involved relocating production capability to Huntley from Carlow, Ireland, and has contributed to TEQ’s major sales growth.

TEQ flexibly collaborates with customers.

One venture utilizes TEQ’s pressure forming expertise, consulting talent at Spartan Design Group LLC of Tonka Bay, Minn., the lid production capability of Technipaq Inc. of Crystal Lake, Ill., and heat-seals machinery from Belco Packaging Systems Inc. of Monrovia, Calif.

“We work to provide total solutions for sterile barrier systems,” McDonald said. “We have been working together for about a year, and we have quoted” numerous jobs.

In addition, TEQ wants to help medical processors with low-volume requirements. “We will try to come out with a stock-size medical-trade program that we can customize with inserts,” McDonald said. “That would allow us to operate with lower tooling costs, smaller minimum quantities and increased lead times.”

McDonald plans to expand on the stock concept in the TEQ booth during the June 18-19 UBM Canon trade show in Philadelphia.

TEQ competitors include Prent Corp. of Janesville, Wis.; the Perfecseal division of Neenah, Wis.-based Bemis Co. Inc.; the Nelipak business of Elmwood Park, N.J.-based Sealed Air Corp.; and Computer Designs Inc. of Whitehall, Pa.

TEQ employs about 100, operates 11 pressure forming lines, owns and occupies 85,000 square feet in two Huntley buildings and reported sales of $36.7 million for the fiscal year ended Sept. 30. That result was up from $30.1 million for the September 2011 FY and $17.5 million for the September 2010 FY.

“We have had a lot of growth,” McDonald said. “This year will be flat (in sales). We are using the time to recover and invest in the business.”

TEQ adopted its current limited-liability-company identity in June 2011 and previously operated as Tek Packaging LLC.

TEQ is a subsidiary of St. Louis-based Esco Technology Inc. and part of Esco’s filtration and fluid flow business segment. In 1997, Esco acquired the assets and stock of TEQ predecessor Filtertek Inc. and related entities including Tek Packaging from Schawk Inc. for about $92 million.


Comments

Illinois thermoformer TEQ invests $6 million in upgrades and infrastructure

By Roger Renstrom
Correspondent

Published: May 27, 2013 10:09 am ET
Updated: May 27, 2013 10:12 am ET

Post Your Comments


Back to story


More stories

Image

Dow Chemical sees potential for PE growth in packaging

March 30, 2015 1:17 pm ET

The packaging market continues to provide growth for the polyethylene business of Dow Chemical Co. — which is a good thing, since the firm will ...    More

Image

Nanotechnology isn't science fantasy

March 30, 2015 12:15 pm ET

ORLANDO, FLA. — Nanotechnology is fast moving from the world of science fiction to science fact, with developments and...    More

Image

Mucell adds polypropylene parts to its potential resin applications

March 30, 2015 11:59 am ET

Structural polypropylene applications are now candidates for the use of Mucell microcellular foaming technology.    More

Image

Light shines on plastics innovation

March 30, 2015 10:57 am ET

The Society of Plastics Engineers shone a light on the benefits of plastic at NPE with its Plastics for Life competition, with the Grand Prize going...    More

Image

Sipospack to build new flexible packaging plant in Hungary

March 30, 2015 9:38 am ET

Hungarian flexible packaging producer Sipospack Kft. is investing nearly 3 million euros ($3.2 million) in an expansion at a new site at Sóskút in cen...    More

Market Reports

Flexible Packaging Trends in North America

North America represents about 30 percent of the global consumption of flexible packaging. Annual growth in this region is forecast at 4 percent during the next 5 years.

For more insight on growth opportunities, drivers of growth and the outlook for 2015, download this report.

Learn more

Plastics Recycling Trends in North America

This report is a review and analysis of the North American Plastics Recycling Industry, including key trends and statistics based on 2013 performance. We examine market environment factors, regulatory issues, industry challenges, key drivers and emerging trends in post-consumer and post-industrial recycling.

Learn more

Plastics in Mexico - State of the Industry Report

This report analyzes the $20 billion plastics industry in Mexico including sales of machinery & equipment, resins and finished products.

Our analysts provide insight on business trends, foreign investment, top end markets and plastics processing activity. The report also provides important data on exports, production, employment and value of plastics products manufactured.

Learn more

Upcoming Plastics News Events

June 2, 2015 - June 3, 2015Plastics Financial Summit - Chicago 2015

September 16, 2015 - September 18, 2015Plastics Caps & Closures - September 2015

More Events